really confused about this and don't know where to start.
Basically i have generated a new angular project with the "dotnet new angular" command.
Im using a fresh machine, node, npm etc etc are all up to date.
My issue is this template just does not work out of the box. When i run the application, all of the frontend will load however, any requests to the api's etc will 404 stating that it cannot find the url.
Message in Chrome console: "Error: Uncaught (in promise): Error: Cannot match any routes. URL Segment..."
My application runs on a different port everytime I execute the "dotnet run" command. Is this supposed to be the case ? Whichever port is generated, this will be the problematic one.
I have to manually change to port 5001 for anything to function correctly (although this comes with annoying security prompts.)
I am using visual studio code for this project. The funny thing is, if i run this project via visual studio (not code) i get a consistent static port number that will function as intended (this also comes with annoying security prompts) so i have to assume its this random port number that vscode is generating ?
Im honestly not to familiar with this so I could be way off admittedly. Any help or advice would be appreaciated. I'd post code snippets if I knew where to start.
PS, I know that I can of course just not run it with VSCode and just stick to Visual Studio. I'd rather understand the issue than ignore it though.
Thanks, in advance.
Related
Because of cross domain issues I need to run my code (which is HTML & JS) via a server in WebStorm. None of the instructions I can find are simple and straight forward. Can someone give me an idiots' guide to doing this?
Alternatively, I have got Tomcat up and running in Eclipse, but I can't figure out how to import a non-java project into it. Again, instructions that a bear of little brain can follow would be appreciated.
WebStorm comes with a built-in static web server, listening on localhost:63342. All you need to do to run your code on it is right-clicking your .html file and choosing Run.
see also https://www.jetbrains.com/help/webstorm/2017.3/debugging-javascript-in-chrome.html, Debugging an application running on the built-in server
I'm having a hard time using eclipse because of the following issue.
It goes like this. I'll code and try to run it. Then, it will throw some errors (of any kind). And so, after I have changed a part of the code, comment out which codes I suspect makes the error, or delete something, I then restart the websphere application server in order to republish my work. Next is to test my work using SoapUI then all of a sudden eclipse throws an error which is the same as before. I've tried to search in here answers to this questions but it involves codes which don't need in my project and also answers that I can't understand well (since I am very new to programming). However, I have found a way to resolve this but it's very inconvenient. To be able for eclipse to detect changes in the src folder, I should restart eclipse after editing my codes then remove my project in the server, start the server and then publish my work in websphere all over again. It solves my problem but I do all of these stuff every now and then even if I only comment out a single line in the code. What I want is to avoid doing this process of resolving the issue since it consumes so much of my time whenever I republish the project in the server.
Can somebody help me with this? Any suggestions would be very helpful. Thanks a lot!
It is a bit strange that you need to restart eclipse. The normal way would be to just re run your application server.
Try only he 3 second steps you mentioned (remove my project in the server, start the server and then publish my work in websphere) and if that works try again without removing the project. Just restart the servers.
And let us know if that worked!
I have wrote a function which technically and logically is correct and while running it runs perfectly locally. But on server I am getting the above error which I could not figure out. I am on protractor version 1.6.0 as same as server but still not able to figure out what causes this.
Scenario is like, I have created many it functions inside my spec.js. But when I ran my spec starting two it functions execute precisely, but on third it scripts fails with above error on server. But when I ran the same spec on my local system with similar settings and configuration, it runs smoothly. Please give me any suggestion if you have encounter the same issue earlier. You can also share the link of a blog if you have any. I am a newbie. Thanks in advance.
Actually , I did a mistake, when we use non angular locators we have to use findElementDriver instead of findElement. Locally, its runs whithout any issues but on server it gives the above error.
Is there a way to launch ColdFusion from the command-line?
I am not talking about launching the CF and related services with the net start command.
I remember doing this in the past. Basically, running CF from the command-line offered two advantages:
You didn't need to keep it as a Service and either have it always launch at boot-up or have to deal with the Services Manager
(more importantly) It echoed back to the screen all kinds of messages, especially error messages, which were helpful when actively developing (because you didn't need to go dig in the ColdFusion log files to find them)
It is possible that I'm mis-remembering and that this hasn't been available since ColdFusion 5.0. Is it at all possible with ColdFusion 9?
Update: Environment: Multi-server configuration with JRun.
Two ways to do this:
In development, add the server to ColdFusion Builder, and all the messages you talk about will show up in the console tab.
Start ColdFusion from the command line. The instructions are slightly different per environment but basically you want to get to bin directory and issue jrun start cfusion or coldfusion start or something similar . Post your environment for more specifics.
Go to C:\JRun\bin and issue jrun start cfusion
In your ColdFusion9/bin Folder you can find stop.bat and start.bat. Executing the latter gives you exactly what you want.
I am using Microsoft Robotics Studio for a school project and I am getting a strange error when I try to run the Visual Simulation Environment. It was working fine until yesterday and then suddenly it gave me a runtime error saying "Illegal command line arguments... do not use VPLHost directly, use dsshost instead to run a manifest" But I am only clicking on Run in VPL/DSS Manifest editor.
I am running MRDS as administrator and I even tried re-installing MRDS but it is still showing the same MS VPL Runtime error. I tried to search online, but cannot find any suitable solution.
I already tried running the existing samples, I.e. Urban Environment, Multiple Simulated Robots etc. but it still gives me the same error. The strange thing is that it was working perfectly one minute, and then started giving me this error message the next minute, when I had not changed anything in between. In fact, I had wanted to change something in my manifest, so I closed the running VPL application, closed VPL and opened DSS manifest editor, and ran my manifest and that is when I got this error.
What is going wrong? Is some MRDS script using vplhost32.exe instead of dsshost? If so, then where and how do I change it?
I tried running the urban envrionment manifest from the command prompt and Using DSSHost32 directly. This time, it didn't give me a runtime error but an intiialization error. I tried changing port numbers but it still doesn't work. I have deleted many files from my computer to free space (JIC) and it still doesn't work. The window just doesn't open even when I hover over it in Windows 7.
The error message looks like this: Only one usage of each socket address (protocol/network address/port) is normally permitted."
This was even after I checked netstat for free ports and tried but I get this error message. Its either this one or the "Don't use VPLHost directly" if I run it through VPL or DSS Manifest Editor.
Could it be that some external services are interfering with DSSHost/VPLHost? Are there any such services which I could try killing? ANY help/suggestion would help right now as my project is due Thursday and this is a really unfortunate time for it to be acting up like this.
Does the problem reproduce after logging off & logging back on? It's likely that you had a process hanging around that you weren't aware of. Logging off should shut down any processes you personally started.
I don't know the solution of your problem, but it would be better that you post your question on the link below:
http://p2p.wrox.com/book-professional-microsoft-robotics-studio-isbn-978-0-470-14107-6-410/
[official forum for the book : Professional Microsoft Robotics Studio], i hope you will shortly get reply there,
The other option is to post your question on the msdn forum,
http://social.msdn.microsoft.com/Forums/en-US/category/robotics
hope this would help....