I'm using the Solana package with Jupiter swap token. After getting the swap result. I'm executing a transaction synchronously with the Solana package sendTransaction method at that time. I'm getting the below error code.
Jupiter Swagger collection.
{accounts: null, err: {InstructionError: [0, {Custom: 3012}]}, logs: [Program JUP3c2Uh3WA4Ng34tw6kPd2G4C5BB21Xo36Je1s32Ph invoke [1], Program log: Instruction: SetTokenLedger, Program log: AnchorError caused by account: token_account. Error Code: AccountNotInitialized. Error Number: 3012. Error Message: The program expected this account to be already initialized., Program JUP3c2Uh3WA4Ng34tw6kPd2G4C5BB21Xo36Je1s32Ph consumed 5139 of 600000 compute units, Program JUP3c2Uh3WA4Ng34tw6kPd2G4C5BB21Xo36Je1s32Ph failed: custom program error: 0xbc4], unitsConsumed: 0}
Jupiter can create up to 3 transactions (setupTransaction, swapTransaction, cleanupTransaction). Make sure that you execute all of them (if they are not null) in this order.
Related
I am using VSCode to create and test my logic apps locally. I have created a simple HTTP trigger and response for it. I have installed all the components and versions correctly. I am getting below error when I run my logic apps,
**Workflow Error: operationName='WorkflowDefinitionProvider.ProcessWorkflow', message='Workflow 'test-1' validate and create workflow failed, the error is 'One or more errors occurred. (Unexpected HTTP status code 'NotFound'.) (Unexpected HTTP status code 'NotFound'.)'', exception='System.AggregateException: One or more errors occurred. (Unexpected HTTP status code 'NotFound'.) (Unexpected HTTP status code 'NotFound'.)
[2022-05-03T02:52:23.134Z] ---> Microsoft.WindowsAzure.Storage.StorageException: Unexpected HTTP status code 'NotFound'.
[2022-05-03T02:52:23.136Z] ---> System.Net.WebException: The remote server returned an error: (404) Not Found.**
It is also giving me below error in the logs,
**ErrorCode:
[2022-05-03T03:08:44.593Z] ', extensionVersion='1.0.0.0', siteName='UNDEFINED_SITE_NAME', slotName='', activityId='00000000-0000-0000-0000-000000000000'.
[2022-05-03T03:08:44.595Z] The listener for function 'Functions.WorkflowDispatcher' was unable to start.
[2022-05-03T03:08:44.595Z] The listener for function 'Functions.WorkflowDispatcher' was unable to start. Microsoft.WindowsAzure.ResourceStack: Unexpected HTTP status code 'NotFound'. The remote server returned an error: (404) Not Found.**
The process to test that I am following,
Start azurite in VSCode
and then Execute function - func host start
Anyone has any clue or faced similar problems? I am using logic apps first time.
To be able to test HTTP triggers locally you need to
"To locally run webhook-based triggers and actions, such as the built-in HTTP Webhook trigger, in Visual Studio Code, you need to set up forwarding for the callback URL."
https://learn.microsoft.com/en-us/azure/logic-apps/create-single-tenant-workflows-visual-studio-code
When I try to deploy package on SAM, the very first status comes in cloud formation console is ROLLBACK_IN_PROGRESS after that it gets changed to ROLLBACK_COMPLETE
I have tried deleting the stack and trying again, but every time same issue occurs.
Error in terminal looks like this-
Sourcing local options from ./SAMToolkit.devenv
SAM_PARAM_PKG environment variable not set
SAMToolkit will operate in legacy mode.
Please set SAM_PARAM_PKG in your .devenv file to run modern packaging.
Run 'sam help package' for more information
Runtime: java
Attempting to assume role from AWS Identity Broker using account 634668058279
Assumed role from AWS Identity Broker successfully.
Deploying stack sam-dev* from template: /home/***/1.0/runtime/sam/template.yml
sam-additional-artifacts-url.txt was not found, which is fine if there is no additional artifacts uploaded
Replacing BATS::SAM placeholders in template...
Uploading template build/private/tmp/sam-toolkit.yml to s3://***/sam-toolkit.yml
make_bucket failed: s3://sam-dev* An error occurred (BucketAlreadyOwnedByYou) when calling the CreateBucket operation: Your previous request to create the named bucket succeeded and you already own it.
upload: build/private/tmp/sam-toolkit.yml to s3://sam-dev*/sam-toolkit.yml
An error occurred (ValidationError) when calling the DescribeStacks operation: Stack with id sam-dev* does not exist
sam-dev* will be created.
Creating ChangeSet ChangeSet-2020-01-20T12-25-56Z
Deploying stack sam-dev*. Follow in console: https://aws-identity-broker.amazon.com/federation/634668058279/CloudFormation
ChangeSet ChangeSet-2020-01-20T12-25-56Z in sam-dev* succeeded
"StackStatus": "REVIEW_IN_PROGRESS",
sam-dev* reached REVIEW_IN_PROGRESS
Deploying stack sam-dev*. Follow in console: https://console.aws.amazon.com/cloudformation/home?region=us-west-2
Waiting for stack-create-complete
Waiter StackCreateComplete failed: Waiter encountered a terminal failure state
Command failed.
Please see the logs above.
I set SQS as event source for Lambda, but didn't provided the permissions like this
- Effect: Allow
Action:
- sqs:ReceiveMessage
- sqs:DeleteMessage
- sqs:GetQueueAttributes
Resource: "*"
in lambda policies.
I found this error in "Events" tab of "CloudFormation" service.
I am trying to run an example Simulink model provided by Mathworks, but while deploying the model to the Pixhawk flight controller, I am receiving the following error:
Error(s) encountered while building "px4demo_uORBReadWrite":
### Failed to generate all binary outputs.
Caused by:
Validation error(s):
### Validating other build tools ...
Unable to locate build tool "GNU PX4 Archiver": echo
I have followed all the steps to configure the hardware properly, except the last part where I was not able to receive the accelerometer data too. The error received while testing the connection at that time was:
Error reading data from the serial port. Operation timed out before requested data was received.
Can someone explain why I am having this issue?
Thanks
Baseline update on endeca is failing. Please find the logs below:
INFO: Finished pushing content to dgraph.
INFO: [AuthoringMDEXHost] Starting shell utility 'rmdir_dgraph-input-old'.
INFO: [LiveMDEXHostA] Starting shell utility 'cleanDir_local-dgraph-input'.
INFO: [LiveMDEXHostA] Starting shell utility 'rmdir_dgraph-input-old'.
SEVERE: Utility 'rmdir_dgraph-input-old' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host LiveMDEXHostA.
Occurred while executing line 7 of valid BeanShell script:
AuthoringDgraphCluster.copyIndexToDgraphServers();
AuthoringDgraphCluster.applyIndex();
LiveDgraphCluster.cleanDirs();
LiveDgraphCluster.copyIndexToDgraphServers();
LiveDgraphCluster.applyIndex();
SEVERE: Error executing valid BeanShell script.
Occurred while executing line 19 of valid BeanShell script:
Dgidx.run();
// distribute index, update Dgraphs
DistributeIndexAndApply.run();
// Upload the generated dimension values to Workbench
WorkbenchManager.cleanDirs();
SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'rmdir_dgraph-input-old' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host LiveMDEXHostA.
INFO: Released lock 'update_lock'.
Has anyone seen this type of error before? Please let me know the potential solution. Also Baseline update is taking 2 to 3 hours and then it's failing, it's annoying.
Thanks!
Check logs under
endeca/PlatformServices/workspace/logs/shell
There should be a log named like appName.rmdir_dgraph-input-old.log
with more info about the error.
Probably a non existing folder is trying to be removed or something like that.
If this is the case just create the folder that the utility is trying to remove and execute baseline again.
I tried starting parpool in MATLAB 2015b. Command as follows,
parpool('local',3);
This command should allocate 3 workers. Whereas I received an error stating failure to start parpool. The error message as follows,
Error using parpool (line 94)
Failed to start a parallel pool. (For information in addition to
the causing error, validate the profile 'local' in the Cluster Profile
Manager.)
A similar query was posted in (https://nl.mathworks.com/matlabcentral/answers/196549-failed-to-start-a-parallel-pool-in-matlab2015a). I followed the same procedure, to validate the local profile as per the suggestions.
Using distcomp.feature( 'LocalUseMpiexec', false); or distcomp.feature( 'LocalUseMpiexec', true) in startup.m didn't create any improvement. Also when attempting to validate local profile still gives error message as follows,
VALIDATION DETAILS
Profile: local
Scheduler Type: Local
Stage: Cluster connection test (parcluster)
Status: Passed
Description:Validation Passed
Command Line Output:(none)
Error Report:(none)
Debug Log:(none)
Stage: Job test (createJob)
Status: Failed
Description:The job errored or did not reach state finished.
Command Line Output:
Failed to determine if job 24 belongs to this cluster because: Unable to
read file 'C:\Users\varad001\AppData\Roaming\MathWorks\MATLAB
\local_cluster_jobs\R2015b\Job24.in.mat'. No such file or directory..
Error Report:(none)
Debug Log:(none)
Stage: SPMD job test (createCommunicatingJob)
Status: Failed
Description:The job errored or did not reach state finished.
Command Line Output:
Failed to determine if job 25 belongs to this cluster because: Unable to
read file 'C:\Users\varad001\AppData\Roaming\MathWorks\MATLAB
\local_cluster_jobs\R2015b\Job25.in.mat'. No such file or directory..
Error Report:(none)
Debug Log:(none)
Stage: Pool job test (createCommunicatingJob)
Status: Skipped
Description:Validation skipped due to previous failure.
Command Line Output:(none)
Error Report:(none)
Debug Log:(none)
Stage: Parallel pool test (parpool)
Status: Skipped
Description:Validation skipped due to previous failure.
Command Line Output:(none)
Error Report:(none)
Debug Log:(none)
I am receiving these error only in my cluster machine. But launching parpool in my standalone PC is working perfectly. Is there a way to rectify this issue?