I have 144 Hz monitor, when I move mouse around Unity Editor interface the it feels like the Unity drops refresh rate to 30 Hz (The mouse movment is very laggy, compared to other software's interfaces). Any suggestions how to solve it? THX!
While the accepted answer certainly does work, if you rather use a targeted approach you can also change the monitor refresh technology for Unity.exe to fixed in the control panel. This will address it for Unity and not force GSYNC in full screen only for other apps. You have to restart Unity for it to take affect.
Screenshot
after digging around I found that GSYNC was the issue. After switching to ONLY FULL SCREEN mode it worked!
Do you have some editor processes running in the background? Perhaps from a 3rd party tool? Sounds like it is checking for something expensive.
Go to Window/Analysis/Editor Iteration Profiler to test what could be slowing down the editor.
Another thing that comes to mind, are you using a laptop with a discrete GPU? You could have a power saving feature enabled to run graphically intensive applications (such as the Unity Editor) at a lower frame rate.
Related
I am building an Unity application as a visual stimulation for a neuroscience study. Basically, my application just shows several flickering planes periodically. However, I noticed that every time after I ran the application for a few minutes, the fps dropped to around 10~30 shown in the profiler. The drop of fps happened in both editor mode or build. Since my script is totally in cycle, I am guessing there were some accumulative issues like GC or memory leak?
Also, I noticed that when the fps starts to become unstable, I can click the Pause button in the tool bar of the Editor and then resume the application, the fps will become stable for a further period. Therefore, I am wondering what actually happens when the Pause button is clicked? Does pressing the Pause button clear or reset anything so the fps can go back to full?
When I had a similar problem, it helped just turning off "Record" in the Unity profiler. Recording consumes so much memory and the fps drop, especially when there are a lot of function calls (like deep recursions).
It doesn't sound like you are constantly creating new GameObjects and not deleting the old ones, but that would be the 2nd thing that comes to mind.
If you use lot of drag-drop references or in short form [SerializeFields], you will lose performance resulting reduced FPS. Try to get everything you want in Awake, specially MonoBehaviours, this worked for me to increase FPS. By everything I didn't mean you have to keep things hard coded everywhere. Just the classes and other things like gameObjects. Floats, int, bools,strings, lists<> should be okay and better to be serialized.
I'm building an openvr app for steamvr to assist with seated play (my room is small so my tracking area isn't ideal). My app pretty much just adjusts the play-area height when I hold the grip button and "scroll" on the touchpad so that I can reach objects that are too low/high at variable heights. (I tried "OpenVR Advanced Settings" but the options for keybinding with it is limited to simple button presses so I decided to make my own version).
I'd like to prevent touchpad input from being sent to the game while the grip button is being held, so that the moving on the touchpad doesn't cause movement in game, is this possible at all?
I'm assuming it's not possible, but wondering whether anyone has had any experience with this.
After your clarification in the comments the answer is no, you can not "eat up" device inputs in an application, I usually work on OpenVR drivers and there after you submit a device input and/or any other event its available to anything that expects pose update events, and event subscribers can not stop others from receiving the said events
However there might be a work around (if its still an issue) I know of at least 1 application that can do what you want and that application is OVR Toolkit (when the overlay is active and you try to click something in the overlay, the game running in parallel will not receive the input, however that will only happen if OVR Toolkit overlay surface receives input, it may be a built in OpenVR overlay feature and you don't have to do anything or it can be defined by the developer, I don't really have a want to test this right now)
Sadly though OVR Toolkit is not open source, but there is an open source toolkit for unity for making overlays, which is open source and might be the solution you're looking for, it can be found here
How to do screen record in unity?
I want to record my screen(gameplay) during my running game.
That should be play/stop , replay , save that recording on locally from device, open/load from my device (which is already we recorded).
In my game one camera which can capture native camera, and one 3d model.
I wish to record that both and use my functionality whenever i want.
Thank you in advance.
This is hard to implement, but not impossible. Because every frame or interval you need to capture screen shot of your camera view and store it in the list. You need good, (Smaller interval but not much. Because when it becomes smaller, needs more memory) interval value. If your interval is big raplay can be seen laggy.
While you play game your ram becomes full and os will terminate the app. So you need to fully cover memory optimization. Another solution is assets in Unity Asset store.
EZ Replay Manager can be used. (Keep in mind: I haven't tried it yet.)
Free
Pro
Check out this open-source project: https://github.com/getsocial-im/getsocial-capture.
By default our project records Main Camera's rendered content. C# examples are in the repo.
You can record in 2 modes:
Continuous mode - capture last X frames.
Manual mode - capture frames on your own when needed. For example, record a timelapse of the level.
Once the recording is done, you can generate GIF, get raw bytes and do whatever you want. E.g. let your users share that GIF with friends.
Here's the recording of a game session from the test app. The recorded GIF shows up in the end:
Disclaimer: I worked at GetSocial at the time of writing.
well i know a guy who post a similar project on github. link :- https://github.com/thanh-nguyen-kim/Unity_Android_Screen_Recorder
but there is a limitation and that is this code is only works on android devices(android means only android not even on ios).
but this is very powerful recorder and it is capture whatever appear on screen(so basically it is a screen recorder made with unity) and also it will capture your microphone output.give it a try.
and if you find any other solution then please also tell me. because it will very helpful for me.because i want to record video with in-game audio and also save it into gallery
Unity now has a screen recording tool builtin. It's called Recorder and doesn't require any coding.
In Unity, go to the Window menu, then click on Package Manager
By default, Packages might be set to "In Project". Select "Unity
Registry" instead
Type "Recorder" in the search box
Select the Recorder and click Install in the lower right corner of the window
That's about all you need to get everything set up and hopefully the
options make sense. The main thing to be aware of that setting
"Recording Mode" to "Single" will take a single screenshot (with
F10)
NOTE: This is a copy of my answer from a Unity screenshots question
I already asked this questions over at Ask Ubunutu. Unfortunately I have not received an answer. As this question is not Ubunutu specific, I am trying it here.
I am using xrandr via console to enable/disable secondary monitors. This work fine so far. Unfortuantely if I move my mouse beyond one screen, it appears on the other one. How can I disable this feature - and lock the mouse to one screen?
I use Ubunutu 10.10 and awesome - no gnome/kde.
I've never seen anything in the Xrandr or Xinerama docs about restricting mouse movement to a single monitor.
And, before Xinerama, I used to run multiple X screens on multiple monitors, but the mouse moved freely between the monitors without trouble. (Windows were stuck on the monitor they started on; it worked much better than it sounds. :) So that's probably out.
You may be able to solve this starting another X server. Configure the second X11 for the correct screen, no mouse (keyboard too?) input device, and start clients on that second X server using DISPLAY=:1 xterm & and so forth.
I've just come off the PSP where performance testing was easy. You just turned off 'vsync' and printed out the frameratem, then change something and see whether the frame rate goes up or down...
Is there any way to do the same thing on the iPhone? How do you turn vsync off? The Instruments tool is next to useless. Its chief problem being that it running it adversely affects the performance of the app! Also, the frame rate it reports is extremely sporadic.
I don't want any fancy tool that reports call trees and time spent in each function. I just want an unrestricted frame rate and some way to see what it is. Is there a high precision counter that you can use on the iPhone? Something like QueryPerformanceCounter in windows?
Also, is there anyway for you to somehow KILL backround processes so you know they can't effect the performance, perhaps solving the sporatic frame rate problem?
Profile your app with Instruments and use the Core Animation instrument. It gives a frame rate.
You're taking the try-something-and-measure approach. Very indirect. It's easy to tell exactly what is taking the time; it doesn't depend on what else is going on and doesn't require learning a new tool. All you need is a debugger that you can interrupt.
You can't kill background processes on the iPhone. That would make it possible for a buggy or malicious app to interfere with the phone function and the needs of all other functions on the iPhone are subordinated to the phone.
Try QuartzDebug or OpenGL Profiler.
Use instruments to get the frame rate.
To do this, run profile on your app (click and hold on the run button in xcode and choose profile). Make sure you are running your app on device. Choose openGL ES analysis. Look at the data display under core animation frames per second.
You want to aim for 60fps.