Okay, so I have installed Neovim with "sudo apt install neovim" and made directory ".config/nvim/init.nvim". While typing in "init.nvim" no words got highlited e.g. :set number. When I tried to install all of the plugins, I got the message as in the title. Can anyone help me with that?
I have looked all over the internet, tried some of the thing people suggeste but unfortunately nothing worked. Should I maybe uninstall Ubuntu as I have windows subsystem for Linux and after that install it again?
The config filename for neovim is "init.vim", not "init.nvim".
Try running :
:echo $MYVIMRC
It should printout the location and the config file name for you.
Related
I am trying to install a config for Neovim and one of the installation steps requires that I install to ~/AppData/Local/nvim/init.vim. However, I don't see a nvim folder in /AppData/Local, only nvim-data. Anyone know why and how to fix? I installed Neovim with scoop by the way.
I've been trying to set up the vscode code . shortcut to work in WSL. Following the instructions from the vscode website, I reinstalled vscode in windows, reinstalled the Remote-Wsl extension, made sure it was in my System Path, and tried running code . in the WSL linux distro terminal. I get the message instructing me to install it on the windows side, and asking me if I want to continue. I hit yes, but it doesn't create the code server folder in my home directory. Typing code . again does the same thing.
Does anyone know why this may be?
This is the output text:
To use Visual Studio Code with the Windows Subsystem for Linux, please install Visual Studio Code in Windows and uninstall the Linux version in WSL. You can then use the code command in a WSL terminal just as you would in a normal command prompt.
Do you want to continue anyway? [y/N]
The error message isn't just pointing out that you need to install the Windows version, but it indicates that you have the Linux version installed in WSL and should remove it.
From that, it sounds like at some point you may have installed the Linux version of VSCode in WSL, and that one is taking priority. You'll need to uninstall it in order to run the Windows version of VSCode with the "Remote - WSL" extension.
You don't mention what distribution you are running, but if it is Ubuntu, try:
sudo apt remove code # or
sudo apt remove code-insiders
Also see the uninstall doc from Microsoft.
A few days ago I installed Kali Linux. I'm trying to use Code-OSS instead of VSCode, since newest version of Kali doesn't have the libraries needed to install the normal one.
If I try to open a folder in Code-OSS from terminal using code-oss . or code ., it just opens Code on a new 'untitled-1' document, or opens the folder I was before closing Code-OSS. It doesn't open the folder I was in the terminal.
In these cases I need to open the folder I want through File > Open folder > search for folder and then open it.
The same just occurred with git commit or git commit --amend; it opens a new document, not the one I want to open.
I spent sometime searching for a solution on documentation, stackoverflow, google but could not find anything.
I cannot find any way to resolve this problem on Code-oss. Apparently it happened just with me.
Surprisingly for me, I was able to install VSCode following this tutorial, and it apparently managed to ignore the lack of libraries of Kali Linux that I mentioned above.
I hope this solution prevent any person in the future to get stuck on this.
I had the same issue when I first installed Kali-linux on my VM. Pretty anoying.
Just intall vscode by running :
sudo apt update
sudo apt install code
It will unistall code-oss and install VsCode, and it works now.
I have just installed debian 10 as well as vscode. I have been struggling with this for 3 days now.. I installed texlive from terminal with the following command:
sudo apt install texlive
I then installed the latex workshop extension in vscode and tried building a .tex file. The following error popped up:
Recipe terminated with fatal error: spawn latexmk ENOENT.
I then preceded to install latexmk from terminal with:
sudo apt install latexmk
The same error kept popping up after that. The output showed this.
[14:59:34] Recipe step env: {}
[14:59:34] cwd: /home/phoenix/Documents/stellies/year4/2021/s&s-414/pracs/prac-4/report
[14:59:34] LaTeX build process spawned. PID: undefined.
[14:59:35] LaTeX fatal error: spawn latexmk ENOENT, . PID: undefined.
[14:59:35] Does the executable exist? PATH: /app/bin:/usr/bin:/home/phoenix/.var/app/com.visualstudio.code-oss/data/node/bin:/home/phoenix/.var/app/com.visualstudio.code-oss/data/cargo/bin:/home/phoenix/.var/app/com.visualstudio.code-oss/data/python/bin
[14:59:35] The environment variable $SHELL: /bin/sh
I then proceded to review the texlive website. I noticed that i did not set the path variable to include the texlive binaries. The texlive website gives the following path to the binary files : PATH=/usr/local/texlive/2021/bin/x86_64-linux:$PATH
however /usr/local/texlive does not exist on my system for some reason. Where can i find the correct path to the texlive binaries on Debian 10?
I had the same problem. The root cause was: (1) software's bin folder missing from PATH; (2) bad file privileges. Consequently, VSC couldn't access latexmk, which explains the error messages.
In my case, the problem occurred on a mac, and specifically after I installed MacTex, which, in turn, installs Tex Live. I believe the same solution may apply to linux distros too.
Solution:
Claim file ownership (which was originally root) under folder /usr/local/texlive: sudo chown -R <username> /usr/local/texlive, where <username> is the OS-level user name. The fix will work for this specific user. If it is not enough, try instead setting group owner appropriately, and/or consider Step 3.
Add /usr/local/texlive/2021/bin/<software_dialect> to PATH. <software_dialect> depends on the installed software version: in my case it is universal-darwin; on linux it might be x86_64-linux.
If the problem persists, try to change file access permissions under /usr/local/texlive using chmod.
EDIT: As a final step, restart VSC for changes to take effect.
I recently encountered the same problem on MacOS Monterrey (M1 based). I used basictex (just for the context). As required by the installation instruction,
I added TeXLive to PATH,
installed latexmk package to the TeX distribution.
However, still got the same error as OP.
Afte reading the wiki again more carefully, what finally worked for me was as simple as restarting VS Code and MacOS. Everything works as expected after a reboot of the MAC.
I had this same problem on Mac recently, the fix that worked for me was to uninstall and reinstall the LaTeX Workshop extension.
I got the same issue , seems to be a misbehaving from Vscode on MacOS
check if the command is in the path on mac
-which command_you are running example which latexmk
If this output something that means you have your latex installed, otherwise go and installed it and make sure it is accessible via command line.
If latex is installed and you are getting that issue you can just restart your VSCode and everything will be okay.
Had a similar error and came across this post when looking for a solution.
I wanted to use texlive on Vscode with WSL2 on Windows 10. Installing texlive-full in wsl fixed this error for me.
On Mac, this is a way to fix the issue
Step1: reinstall mactex by downloading it from this link: http://www.tug.org/mactex/mactex-download.html
Step2: In your terminal do cd /usr/local, you should see texlive folder
Step3: In your terminal do sudo vim etc/paths to set the environment. Details are in this link: https://www.architectryan.com/2012/10/02/add-to-the-path-on-mac-os-x-mountain-lion/
Step4: In your terminal do /usr/local/texlive/2021/bin/x86_64-linux at the bottom. check the folder to see if the year is correct. Details in: http://www.tug.org/texlive/quickinstall.html.
Step5: Quit VC code completely, and reopen it.
OS: Ubuntu 18.04.3 LTS
I just installed neovim using sudo apt-get install neovim and added the folder and file ~/.config/nvim/vim.init. At this moment the file has no content, but when I open up nvim and type :PlugInstall I get error: E492: Not an editor command: PlugInstall. I am clueless, what is going wrong?
I think you are trying to use vim-plug without previously installing it.
I changed my plug#begin to
call plug#begin('~/.local/share/nvim/site/autoload/plug.vim')
and it worked for me now
I followed this and it worked: https://github.com/junegunn/vim-plug/wiki/tutorial
I also wrote call plug#begin('~/.config/nvim/plugged) and made a directory at that location. Then the reload command is also source ~/.config/nvim/init.vim where init.vim is the configuration file. And then I just ran :PlugInstall and it worked :D
I got this error too, but in my case I was typing :pluginstall instead of the case-sensitive :PlugInstall and you have to use the correct case or it won't work. Oddly, :PlugUpdate was able to work before :PlugInstall but that was just because I typed the case correctly.
I see I have the vim.plug correctly installed here
~/.vim/autoload/plug.vim
I also created a "plugged" folder here and I see this is where vim-plug put the downloaded files from running :PlugInstall
.vim/plugged
To be overly pedantic, I typed 'cd' to get to the user directory, then cd .vim to go into my dotted .vim folder, then "mkdir plugged" to create the plugged directory. Not sure if this was 100% necessary or if :PlugInstall would have created it by itself.
I also needed to :source ~/.vimrc between adding addition plug line items and typing :PlugInstall, so make sure you "source" or you can also completely quit and restart your Vim so it will reload your .vimrc file, otherwise it won't know anything about your file edits.
I'm on a Mac. I installed vim-plug for standard vim and this gave me this file
~/.vim/autoload/plug.vim
My .vimrc is this:
" add line numbers
set number
call plug#begin()
" The default plugin directory will be as follows:
" - Vim (Linux/macOS): '~/.vim/plugged'
" Make sure you use single quotes
Plug 'tomasiser/vim-code-dark'
Plug 'tpope/vim-sensible'
call plug#end()
I had the same problem and come here for leave my contribution ( I hadn't find this solution in anywhere ). In my case, it's caused by permissions in my linux. I always start my vim for ocults archives with:
sudo vim .vimrc
In this case, the Vim just use the default commands ( I don't know why but I think this is by the security ). If you just run:
vim .vimrc
All the user commands will be able.
In my case, I had multiple terminal windows open. I still had the Vim window open after installing vim-plug in another window. Solution was to close and re-open Vim.
Instead of
call plug#begin()
I did
call plug#begin(has('nvim') ? stdpath('data') . '/plugged' : '~/.vim/plugged')
Worked 100%
If you have followed the steps in https://github.com/junegunn/vim-plug, but still didn't work.
Try run ':source ~/.config/nvim/vim.init' in vim (not source ~/.config/nvim/vim.init in shell).
Make sure git is installed.
In my case, I was trying to do :PlugInstall in a docker container and did not have git installed. I installed git, and it worked.