I have a bash script, in the end will find folders with modified timestamps greater than 5 days then pipe it to xargs to rm. This is working fine and to print the command I am using -t option for the xargs as well. But I need this output written to a log file.
so my command line is as follows :
find /tmp/test -type d -mtime +5 -print0 | xargs -t -0 -I {} /bin/rm -rf '{}'
I would like to get the output to know which all folders are deleted to a file named rmdirs.log
I tried redirecting it to a file but like below and it wont work;
find /tmp/test -type d -mtime +5 -print0 | xargs -t -0 -I {} /bin/rm -rf '{}' >> rmdirs.log
Any help would be much appreciated.
I created a test environment with touch. This properly deletes the directory and logs the ones deleted to rmdirs.log file.
touch -t 202201010000 tmp/test/old
touch tmp/test/new
find tmp/test -type d -mtime +5 -print | \
tee -a rmdirs.log | \
tr '\12' '\0' | \
xargs -0 -I {} /bin/rm -rf {}
Use teeto append (-a) to the rmdirs.log file.
Use tr to convert the newlines (\12) to null (\0) for safety.
Finally run xargs to remove the files.
Lets say I hit foo.html with find, i would like to pipe the contents back into foo.html
find . -iregex '.*\(html\|htm\)' -printf '%P\0' | \
xargs -0 sed -Ee "s:(http|https)\://(www.|)${domain}[?/]::g" \
> # to what? {\} ???
Right now it does not know what or where its
Pass the -i flag to sed, then it will modify the input file in place.
find . -iregex '.*html?' -printf '%P\0' | xargs -0 sed -i -Ee "s:(http|https)\://(www.|)${domain}[?/]::g"
On my FTP server, I look for files delivered in the past day and remove in-place header & trailer records.
find . -type f -name "CDC*" -ctime -1 -exec sed -i'' -e '1d' -e '$d' '{}' \;
This works well.
I want to automate this in a script. But how can I send myself an email notification is no files are found? I am thinking of doing something like:
find . -type f -name "CDC*" -ctime -1 -exec sed -i'' -e '1d' -e '$d' '{}' \;
EXIT=`echo $?`
case $EXIT in
0) ...do stuff...
*) mail....exit
esac;;
There has to a better way, right?
I'm pretty sure that you could take whatever command you need to do the search, and pipe a wc -l on to the end of it. Then use an if statement to check for zero. So using your example above.
NUMLINES=`find . -type f -name "CDC*" -ctime -1 -exec sed -i'' -e '1d' -e '$d' '{}' \ | wc -l`
if [ "$NUMLINES" -eq 0 ] ; then
foo
fi
Or something like that. I didn't check if that syntax is correct though. But i'm sure you get my drift
The following command is correctly changing the contents of 2 files.
sed -i 's/abc/xyz/g' xaa1 xab1
But what I need to do is to change several such files dynamically and I do not know the file names. I want to write a command that will read all the files from current directory starting with xa* and sed should change the file contents.
I'm surprised nobody has mentioned the -exec argument to find, which is intended for this type of use-case, although it will start a process for each matching file name:
find . -type f -name 'xa*' -exec sed -i 's/asd/dsg/g' {} \;
Alternatively, one could use xargs, which will invoke fewer processes:
find . -type f -name 'xa*' | xargs sed -i 's/asd/dsg/g'
Or more simply use the + exec variant instead of ; in find to allow find to provide more than one file per subprocess call:
find . -type f -name 'xa*' -exec sed -i 's/asd/dsg/g' {} +
Better yet:
for i in xa*; do
sed -i 's/asd/dfg/g' $i
done
because nobody knows how many files are there, and it's easy to break command line limits.
Here's what happens when there are too many files:
# grep -c aaa *
-bash: /bin/grep: Argument list too long
# for i in *; do grep -c aaa $i; done
0
... (output skipped)
#
You could use grep and sed together. This allows you to search subdirectories recursively.
Linux: grep -r -l <old> * | xargs sed -i 's/<old>/<new>/g'
OS X: grep -r -l <old> * | xargs sed -i '' 's/<old>/<new>/g'
For grep:
-r recursively searches subdirectories
-l prints file names that contain matches
For sed:
-i extension (Note: An argument needs to be provided on OS X)
Those commands won't work in the default sed that comes with Mac OS X.
From man 1 sed:
-i extension
Edit files in-place, saving backups with the specified
extension. If a zero-length extension is given, no backup
will be saved. It is not recommended to give a zero-length
extension when in-place editing files, as you risk corruption
or partial content in situations where disk space is exhausted, etc.
Tried
sed -i '.bak' 's/old/new/g' logfile*
and
for i in logfile*; do sed -i '.bak' 's/old/new/g' $i; done
Both work fine.
#PaulR posted this as a comment, but people should view it as an answer (and this answer works best for my needs):
sed -i 's/abc/xyz/g' xa*
This will work for a moderate amount of files, probably on the order of tens, but probably not on the order of millions.
Another more versatile way is to use find:
sed -i 's/asd/dsg/g' $(find . -type f -name 'xa*')
I'm using find for similar task. It is quite simple: you have to pass it as an argument for sed like this:
sed -i 's/EXPRESSION/REPLACEMENT/g' `find -name "FILE.REGEX"`
This way you don't have to write complex loops, and it is simple to see, which files you are going to change, just run find before you run sed.
u can make
'xxxx' text u search and will replace it with 'yyyy'
grep -Rn '**xxxx**' /path | awk -F: '{print $1}' | xargs sed -i 's/**xxxx**/**yyyy**/'
There's some good answers above. I thought I'd throw in one more that is succinct and parallelizable, using GNU parallel, which I often prefer to xargs:
parallel sed -i 's/abc/xyz/g' {} ::: xa*
Combine this with the -j N option to run N jobs in parallel.
If you are able to run a script, here is what I did for a similar situation:
Using a dictionary/hashMap (associative array) and variables for the sed command, we can loop through the array to replace several strings. Including a wildcard in the name_pattern will allow to replace in-place in files with a pattern (this could be something like name_pattern='File*.txt' ) in a specific directory (source_dir).
All the changes are written in the logfile in the destin_dir
#!/bin/bash
source_dir=source_path
destin_dir=destin_path
logfile='sedOutput.txt'
name_pattern='File.txt'
echo "--Begin $(date)--" | tee -a $destin_dir/$logfile
echo "Source_DIR=$source_dir destin_DIR=$destin_dir "
declare -A pairs=(
['WHAT1']='FOR1'
['OTHER_string_to replace']='string replaced'
)
for i in "${!pairs[#]}"; do
j=${pairs[$i]}
echo "[$i]=$j"
replace_what=$i
replace_for=$j
echo " "
echo "Replace: $replace_what for: $replace_for"
find $source_dir -name $name_pattern | xargs sed -i "s/$replace_what/$replace_for/g"
find $source_dir -name $name_pattern | xargs -I{} grep -n "$replace_for" {} /dev/null | tee -a $destin_dir/$logfile
done
echo " "
echo "----End $(date)---" | tee -a $destin_dir/$logfile
First, the pairs array is declared, each pair is a replacement string, then WHAT1 will be replaced for FOR1 and OTHER_string_to replace will be replaced for string replaced in the file File.txt. In the loop the array is read, the first member of the pair is retrieved as replace_what=$i and the second as replace_for=$j. The find command searches in the directory the filename (that may contain a wildcard) and the sed -i command replaces in the same file(s) what was previously defined. Finally I added a grep redirected to the logfile to log the changes made in the file(s).
This worked for me in GNU Bash 4.3 sed 4.2.2 and based upon VasyaNovikov's answer for Loop over tuples in bash.
The Silver Searcher Solution
I'm adding another option for those people who don't know about the amazing tool called The Silver Searcher (command line tool is ag).
Note: You can use grep and other tools to do the same thing here, but The Silver Searcher is fantastic :)
TLDR
ag -l 'abc' | xargs sed -i 's/abc/xyz/g'
Install The Silver Searcher
sudo apt install silversearcher-ag # Debian / Ubuntu
sudo pacman -S the_silver_searcher # Arch / EndeavourOS
sudo yum install epel-release the_silver_searcher # RHEL / CentOS
Demo Files
Paste the following into your terminal to create some demonstration files:
mkdir /tmp/food
cd /tmp/food
content="Everybody loves to abc this food!"
echo "$content" > ./milk
echo "$content" > ./bread
mkdir ./fastfood
echo "$content" > ./fastfood/pizza
echo "$content" > ./fastfood/burger
mkdir ./fruit
echo "$content" > ./fruit/apple
echo "$content" > ./fruit/apricot
Using 'ag'
The following ag command will recursively find all the files that contain the string 'abc'. It ignores the .git directory, .gitignore files, and other ignore files:
$ ag 'abc'
milk
1:Everybody loves to abc this food!
bread
1:Everybody loves to abc this food!
fastfood/burger
1:Everybody loves to abc this food!
fastfood/pizza
1:Everybody loves to abc this food!
fruit/apple
1:Everybody loves to abc this food!
fruit/apricot
1:Everybody loves to abc this food!
To just list the files that contain the string 'abc', use the -l switch:
$ ag -l 'abc'
bread
fastfood/burger
fastfood/pizza
fruit/apricot
milk
fruit/apple
Changing Multiple Files
Finally, using xargs and sed, we can replace the 'abc' string with another string:
ag -l 'abc' | xargs sed -i 's/abc/eat/g'
In the above command, ag is listing all the files that contain the string 'abc'. The xargs command is splitting the file names and piping them individually into the sed command.
I am interested into getting into bash scripting and would like to know how you can traverse a unix directory and log the path to the file you are currently looking at if it matches a regex criteria.
It would go like this:
Traverse a large unix directory path file/folder structure.
If the current file's contents contained a string that matched one or more regex expressions,
Then append the file's full path to a results text file.
Bash or Perl scripts are fine, although I would prefer how you would do this using a bash script with grep, awk, etc commands.
find . -type f -print0 | xargs -0 grep -l -E 'some_regexp' > /tmp/list.of.files
Important parts:
-type f makes the find list only files
-print0 prints the files separated not by \n but by \0 - it is here to make sure it will work in case you have files with spaces in their names
xargs -0 - splits input on \0, and passes each element as argument to the command you provided (grep in this example)
The cool thing with using xargs is, that if your directory contains really a lot of files, you can speed up the process by paralleling it:
find . -type f -print0 | xargs -0 -P 5 -L 100 grep -l -E 'some_regexp' > /tmp/list.of.files
This will run the grep command in 5 separate copies, each scanning another set of up to 100 files
use find and grep
find . -exec grep -l -e 'myregex' {} \; >> outfile.txt
-l on the grep gets just the file name
-e on the grep specifies a regex
{} places each file found by the find command on the end of the grep command
>> outfile.txt appends to the text file
grep -l -R <regex> <location> should do the job.
If you wanted to do this from within Perl, you can take the find commands that people suggested and turn them into a Perl script with find2perl:
If you have:
$ find ...
make that
$ find2perl ...
That outputs a Perl program that does the same thing. From there, if you need to do something that easy in Perl but hard in shell, you just extend the Perl program.
find /path -type f -name "*.txt" | awk '
{
while((getline line<$0)>0){
if(line ~ /pattern/){
print $0":"line
#do some other things here
}
}
}'
similar thread
find /path -type f -name "outfile.txt" | awk '
{
while((getline line<$0)>0){
if(line ~ /pattern/){
print $0":"line
}
}
}'