I am testing a known working Redhat Kickstart procedure on upgraded Vmware software.
Our KS process uses two CDRom's. the RH ISO is attached to CD 1 and KS ISO attached to CD 2.
the KS process fails with many messages such as
localhost dracut-initqueue[1118]: Warning: dracut-initqueue timeout - starting timeout scripts
In addition the following message appears in the rdsosreport file:
On Centos, I ran into the following error:
sudo snmptrap -v 2c -c read localhost '' UPS-MIB::upsTraps
MIB search path: /root/.snmp/mibs:/usr/share/snmp/mibs
Cannot find module (UPS-MIB): At line 0 in (none)
UPS-MIB::upsTraps: Unknown Object Identifier
The above error happened after
Copied UPS-MIB.txt to /usr/share/snmp/mibs
I started snmptrapd:
snmptrapd -f -Lo -Dread-config -m ALL
The version of the Net-SNMP is 5.2.x.
The same procedures work fine with Ubuntu 18.04/Net-SNMP 5.3.7.
I wonder how to debug and fix the problem?
Besides the Net-SNMP version difference, on Ubuntu, I found an instruction to install mib-download-tool, and execute it after the installation of Net-SNMP, and comment out the lines beginning with min: in snmp.conf in order to fix the error of missing MIB's.
However, for the Centos, I had no need and found no such instruction, thus I have not done it yet, as there is no error message of missing MIB's.
The MIB file is downloaded from https://tools.ietf.org/rfc/rfc1628.txt
renamed to UPS-MIB.txt (It seems to me that the name of the MIB file does not matter, as long as it's unique? I tried to use a different names, upsMIB.txt, rfc1628.txt, but it does not help to improve.)
I solved the problem as follows:
manually copied /usr/share/snmp/mibs/ietf/UPS-MIB on an Ubuntu with Net-SNMP 5.7.3 installed to the Centos /usr/share/snmp/mibs/UPS-MIB
then restart the snmpd
by the command:
service snmpd restart
then the OID of UPS-MIB becomes visible and accessible.
Maybe, the version that I downloaded from https://tools.ietf.org/rfc/rfc1628.txt is not suitable??
I have configured gammurc and gammu --identify is working. But I received error when I do gammu-smsd -c smsdrc
Here the following error :
gammu-smsd: the native_pgsql driver was not compiled in!
When I run gammu-smsd -v it's tell this :
Compiled in Features :
OS Support :
- ALARM
- WINDOWS_SERVICE
- EVENT_LOG
Backend services :
- NULL
- FILES
- ODBC
I'am using windows and pgsql
how do I fix this problem ? and
How do I compiled native_pgsql ?
thanks
You can use ODBC driver instead. It's only driver which works without additional dependencies on Windows.
To have Gammu built with native PostgreSQL driver on Windows, see our compilation instructions. Gammu will automatically search for the libraries in common locations, but you might end up needing to enter POSTGRES_INCLUDE_DIR and POSTGRES_LIBRARY manually in CMake.
I am using neo4j enterprise 3.0.3 version for windows. Following the operations manual 3.0, I have installed the neo4j service with bin\neo4j install-service. But I can't start it with bin\neo4j start. It said
Invoke-Neo4j : Failed to start service 'Neo4j Graph Database - neo4j (neo4j)'.
And I can't start the neo4j service in windows serice either. Maybe anyone have encountered this case before?
I had the same problem: I am using neo4j community 3.1.2 for windows and installed the service with the neo4j.bat file without any problems.Then i wanted to start the service with neo4j.bat and got the same error as you
I found a solution that worked for me. My neo4j files were in a folder, where the path to the folder contained spaces (C:\Program Files\Neo4j) Then i moved the folder one level up (C:\Neo4j).
After that i could start the service without problems.
Maybe this solution helps.
I am running neo4j on windows and in my case the crux of the issue was that there was an incompatibility between the installed versions of Java (32-bit) v/s OS version. The biggest clue that led me to this is the following set of lines in neo4j-service.2018-08-03 log file
[2018-08-03 14:55:42] [info] [ 1432] Starting service...
[2018-08-03 14:55:42] [error] [ 1432] %1 is not a valid Win32 application.
[2018-08-03 14:55:42] [error] [ 1432] Failed creating java C:\JavaNew\bin\server\jvm.dll
[2018-08-03 14:55:42] [error] [ 1432] %1 is not a valid Win32 application.
[2018-08-03 14:55:42] [error] [ 1432] ServiceStart returned 1
There are a fair number of potential issues, and I have made an attempt to compile all the issues with this,
Windows services cannot deal with service names in folders that have spaces; especially if there is another folder with the same name as the one with spaces.
For example - C:\Program Files... will have issues if C:\Program\Something...
To work around this, I put Neo4j in root folder c:\Neo4j
Get-Java.ps1 (under ..\bin\Neo4j-Management folder)looks in the path variable for 'JAVA_HOME' (usually found in *nix environments). If it does not find it here, it keeps looking in registry, and finally throws up its hand!
To deal with this, I simply put in a path variable. For a good measure, I uninstalled Java and re-installed Java in the root folder under C:\JavaNew
In retrospect, this step is probably not on part of the problem, and hence can be ignored. But I am leaving it here for completeness sake.
Invoke-Neo4j.ps1 (also under ..\bin\Neo4j-Management folder) has code that determines if the OS is 32-bit (or 64-bit). Based on this it determines if it should run prunsrv-i386.exe (32-bit) or prunsrv-amd64.exe (64-bit).
This has to match the Java version installed.
Upon running java -XshowSettings:all, and inspecting the sun.arch.data.model value (32, in my case), I realized that my OS is 64 bit and the Java version is 32-bit.
To deal with this, I put in code (very klugey!). I am sure there are much better ways to get to the same outcome, but this is what I used.
switch ( (Get-WMIObject -Class Win32_Processor | Select-Object -First 1).Addresswidth ) {
32 { $PrunSrvName = 'prunsrv-i386.exe' } # 4 Bytes = 32bit
#64 { $PrunSrvName = 'prunsrv-amd64.exe' } # 8 Bytes = 64bit COMMENTED as a workaround!!!
64 { $PrunSrvName = 'prunsrv-i386.exe' } # 8 Bytes = 64bit
Now, uninstall the neo4j service, install it, and start the service.
Hope this works for you.
neo4j console
Posting for latest versions > 4.x
I had the same issue using neo4j start, Neo4j console is the right command I was looking for. It is a web-based graph that acts as an interactive tutorial.
i had the same problem , after the neo4j worked for few weeks it stoop working (without any change that i made)
i have set java_home uninstall and install and now it works
neo4j-enterprise-3.3.4
I was also having weired issue as there was no error but neo4J service did not start.
[xx#ss1 bin]$ ./neo4j console
[xx#ss1 bin]$ .
The problem was with the permission on Java directory and I tried
chmod -R 777 jdk_directory
and problem got solved.
#neo4j #neo4jnotstarting
When I start a debugging session under eclipse (luna) for my STM32F429 Discovery board. I get the following error:
OpenOCD failed with code (1).
The information in the console pane is:
Open On-Chip Debugger 0.9.0-dev-00223-g1567cae (2015-01-12-13:43)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Started by GNU ARM Eclipse
Info : clock speed 2000 kHz
Error: open failed
in procedure 'init'
in procedure 'ocd_bouncer'
in procedure 'transport'
in procedure 'init'
The "board" file being referenced in the debug setup is: stm32f429discovery.cfg
I did have this working for another ST-Micro board and I could do a full debug session with no problems. Suddenly it just stopped being able to access the board and I get the same errors for it as I get with this board.
I was hoping to be able to use the purely open source s/w that runs on Linux to be able to work with these boards. I'm hoping that someone can get me out of this situation.
Thanks in advance.
Cheers!!
What you use the command and debugger?
try:
openocd -f interface/jlink.cfg -f target/stm32f429discovery.cfg