Install snap() on wsl2 for flutter [duplicate] - flutter

Question

I am attempting to debug some C# / .NET 5 code in WSL 2 with Ubuntu on Windows. I have WSL 2 setup with Windows 10 and want to test out creating a Systemd service. Unfortunately, it appears Systemd is not enabled with WSL 2 by default, even though a standard Ubuntu install does have it enabled by default. Is there any way to get Systemd enabled in WSL 2?

Answer 1

Note: See footnote at bottom of this answer for background on this Community Wiki.
There are several possible paths to enabling Systemd on WSL2 (but not WSL1). These are summarized here, with more detail provided below.
Option 1: Upgrade WSL to the latest application release (if supported by your system) and opt-in to the Systemd feature
Option 2: Run a Systemd-helper script designed for WSL2
Option 3: Manually run Systemd in its own namespace
And while not part of this question, for those simply looking to run certain applications that require Systemd, there are alternatives:
On WSL1 and WSL2:
Alternative 1: SysVInit scripts (e.g. sudo service <service_name> start) where available
Alternative 2: Manually configuring and running the service
On WSL2-only:
Alternative 3: Docker
Should you enable Systemd in WSL?
First, consider whether you should or need to enable Systemd in WSL. Enabling Systemd will automatically start a number of background services and tasks that you really may not need under WSL. As a result, it will also increase WSL startup times, although the impact will be dependent on your system. Check the Alternatives section below to see if there may be a better option that fits your needs. For example, the service command may do what you need without any additional effort.
More detail on each answer:
Option 1: Upgrade WSL to the latest application release (if supported by your system) and opt-in to the Systemd feature
Microsoft has now integrated Systemd support in the WSL2 application release (as opposed to the older "Windows feature" implementation).
Starting with WSL Application Release 1.0.0, this feature is available on both Windows 10 and Windows 11. Windows 10 users do need to be on UBR (update build revision) 2311 or later. The UBR is the last 4 digits of your full Windows build number (e.g. 10.0.19045.2311 for Windows 10 22H2). 2311 is installed with KB5020030, an optional Preview update, although if you are reading this later, it will likely be a later (non-Preview) monthly servicing update.
If you are on a supported Windows release, the WSL application with Systemd support can be installed:
Through the Microsoft Store (as "Windows Subsystem for Linux").
Or from the Releases page in the Github repo. To install a release manually:
Reboot (to make sure that WSL is not in use at all). A simple wsl --shutdown may work, but often will not.
Download the 1.0.0 (or later) release from the link above.
Start an Administrator PowerShell and:
Add-AppxPackage <path.to>/Microsoft.WSL_1.0.0.0_x64_ARM64.msixbundle
wsl --version # to confirm
To enable, start your Ubuntu (or other Systemd) distribution under WSL (typically just wsl ~ will work).
sudo -e /etc/wsl.conf
Add the following:
[boot]
systemd=true
Exit Ubuntu and again:
wsl --shutdown
Then restart Ubuntu.
sudo systemctl status
... should show your Systemd services.
Option 2: Run a Systemd-helper script designed for WSL2
There are a number of Systemd-enablement scripts available from various sources. Given the complexities involved in running Systemd under WSL, it is recommended that you:
Use one that is actively maintained
Attempt to understand, as much as possible, how they operate, and how they may impact other features and applications in your distribution(s) under WSL
When asking questions here or on any other site, disclose in the question which script you are using so that others can attempt to understand and/or reproduce your issue in the proper context
Several of the more popular projects that enable Systemd under WSL2 are:
Genie: 1.8k stars, last commit September, 2022
Distrod: 1.4k stars, last commit July 2022
WSL2-Hacks: 1.1k stars, mostly instructional, with a supporting script example. Last commit January, 2022
At the core, all of them operate on the same principles covered in the next option ...
Option 3: Manually run Systemd in its own namespace
One of the main issues with running Systemd in earlier versions of WSL is that both inits need to be PID 1. To get around this, it is possible to create a new namespace or container where Systemd can run as PID 1.
To see how this is done (at a very basic level):
Run:
sudo -b unshare --pid --fork --mount-proc /lib/systemd/systemd --system-unit=basic.target
This starts Systemd in a new namespace with its own PID mapping. Inside that namespace, Systemd will be PID1 (as it must, to function) and own all other processes. However, the "real" PID mapping still exists outside that namespace.
Note that this is a "bare minimum" command-line for starting Systemd. It will not have support for, at least:
Windows Interop (the ability to run Windows .exe)
The Windows PATH (which isn't necessary without Windows Interop anyway)
WSLg
The scripts and projects listed above do extra work to get these things working as well.
Wait a few seconds for Systemd to start up, then:
sudo -E nsenter --all -t $(pgrep -xo systemd) runuser -P -l $USER -c "exec $SHELL"
This enters the namespace, and you can now use ps -efH to see that systemd is running as PID 1 in that namespace.
At this point, you should be able to run systemctl.
And after proving to yourself that it's possible, it is recommended that you exit all WSL instances completely, then doing wsl --shutdown. Otherwise, some things will be "broken" until you do. They can likely be "fixed", but that's beyond the scope this answer. If you are interested, please refer to the projects listed above to see how they handle these situations.
Alternative 1: SysVInit scripts (e.g. sudo service <service_name> start) where available
In Ubuntu, Debian, and some other distributions on WSL, many of the common system services still have the "old" init.d scripts available to be used in place of systemctl with Systemd units. You can see these by using ls /etc/init.d/.
So, for example, you can start ssh with sudo service ssh start, and it will run the /etc/init.d/ssh script with the start argument.
Even some non-default packages such as MySql/MariaDB will install both the Systemd unit files and the old init.d scripts, so you can still use the service command for them as well.
On the hand, some packages, like Elasticsearch, only install Systemd units. And some distributions only provide Systemd units for most (if not all) packages in their repositories.
Alternative 2: Manually configuring and running the service
For those services that don't have a init-script equivalent, it can be possible to run them "manually".
For simplicity, let's assume that the ssh init.d script wasn't available.
In this case, the "answer" is to figure out what the Systemd unit files are doing and attempt to replicate that manually. This can vary widely in complexity. But I'd start with looking at the Systemd unit file that you are trying to run:
less /lib/systemd/system/ssh.service
# Trimmed
[Service]
EnvironmentFile=-/etc/default/ssh
ExecStartPre=/usr/sbin/sshd -t
ExecStart=/usr/sbin/sshd -D $SSHD_OPTS
RuntimeDirectory=sshd
RuntimeDirectoryMode=0755
Some of the less relevant lines have been trimmed to make it easier to parse, but you can man systemd.exec, man systemd.service, and others to see what most of the options do.
In this case, when you sudo systemctl start ssh, it:
Reads environment variables (the $SSHD_OPTS) from /etc/default/ssh
Tests the config, exits if there is a failure
Makes sure the RuntimeDirectory exists with the specified permissions. This translates to /run/sshd (from man systemd.exec). This also removes the runtime directory when you stop the service.
Runs /usr/sbin/sshd with options
So, if you don't have any environment-based config, you could just set up a script to:
Make sure the runtime directory exists. Note that, since it is in /run, which is a tmpfs mount, it will be deleted after every restart of the WSL instance.
Set the permissions to 0755
Start /usr/sbin/sshd as root
... And you would have done the same thing manually without Systemd.
Again, this is probably the simplest example. You might have much more to work through for more complex tasks.
Alternative 3: Docker
Many packages/services are available as Docker images. Docker typically runs very well under Ubuntu on WSL2 (specifically WSL2; it will not run on WSL1). If there's not a SysVinit "service" script for the service you are trying to start, there may very well be a Docker image available that runs in a containerized environment.
Example: Elasticsearch, as in this question.
Bonus #1: Doesn't interfere with other packages already installed (no dependency issues).
Bonus #2: The Docker images themselves pretty much never use Systemd, so you can often inspect the Dockerfile to see how the service is started without Systemd. For more information see the next option - "The manual way."
Microsoft recommends Docker Desktop for Windows for running Docker containers under WSL2.
Footnote This answer is being posted as a Community Wiki because it can apply to multiple Stack Overflow questions. It is originally based on answers to this Ask Ubuntu question. However, it is hoped that this wiki-answer can be continuously updated by the community as Systemd evolves on WSL.
This question has been chosen since:
It appears to be the most canonical, straightforward, "How do I enable Systemd on WSL?" question.
It is on-topic, as *creating Systemd services is (or at least can-be) unique to programming.