We are using a branching strategy like the following
Main
|_ v1
|_ v2
As we were working on [v1], some devs needed to begin on [v2] so a branch was created from [Main].
Normally, we would have merged [v1] to [Main] for release then merged [v1] to [v2] and made sure everything was working as expected.
The thing is stuff happened and we were forced to merge only parts of [v1] leaving other changes for [v2] release (will call this changesets group [Remaining v1]).
Now, I need to merge all the remaining changesets from [v1] into [v2] but since they have no parent-child relationship, it looks like all I could directly do is a baseless merge. So I thought maybe we could Merge [Remaining v1] to [Main], Merge everything new from [Main] to [v2], rollback [Remaining v1] in [Main].
The thing is, according to my tests, when time will come to merge [v2] into [Main], every changes that came from [Remaining v1] won't be included since they once existed in [Main].
My question is: is there any way of forcing [Remaining v1] to merge again in [Main] from the [v2] branch even though they were once rollbacked?
Related
I would like to support the following situation:
development happens on two branches - they are both a bit like "default" (actual development happens on feature branches, but they are branched of and merged to one of these two branches)
I would like to merge changes from one branch to another in both directions without grafting individual commits
branches have a diff (on big merge of a feature branch) that I would like to always keep and support
I tried to do a dummy merge as described here, first in one direction, then after several successful merges, in another direction (dummy merge of dummy merge). Now I need to do a merge again in another direction, and here another dummy merge (of dummy merge of dummy merge) does not help me any more (and I hoped that one dummy merge would be enough anyway).
Is it possible to do development in this fashion, or is it better to do most of development in one branch? (well, I know it is better for hg, but I have reasons)
Preface
If both branches share the same functionality (unstable common DEVEL), I can't see any reasons in such splitting, except added headache
Face
You can avoid merging unwanted changeset from one branch into another and use ordinary merge if you'll convert this mergeset into MQ-patch ( or maybe shelveset) and always merge from|to (read "Merging patches with new upstream revisions" for merging to branch hint) branch with unapplied patch
We are trying to migrate from Subversion to Mercurial but we are encountering some problems. First a bit of background:
Desired workflow:
We would like to have just two named branches, stable and default, within one repository.
Development takes place on default branch.
Bug fixes are committed to stable branch and merged to default.
After every Sprint we tag our default branch.
Eventually we can release a new version, for which we bring some code (possibly the latest Sprint tag) from default over to stable (update stable, merge Sprint_xyz), tag the branch (tag Release_xyz) and release.
We also want the following jobs on our Jenkins build server for CI:
End-of-Sprint job: This job should tag default with something like Sprint_xyz
Release job: This job should bring the latest "Sprint" tag changes over to the stable branch, then tag stable with something like Release_6.0.0 and build a release.
Some more background:
Mercurial is new to us, but for what we have seen, this seems like a sane approach. We chose tags to mark releases over named-branches and cloned-branches trying to make the development workflow as straightforward as possible (single merge step, single checkout, only a couple of branches to keep track of...).
We use scrum and potentially (but not necessarily) release a version after each sprint which may (or not) become part of the stable branch and turn into a "shipable" release.
The problem we are encountering (and which is making us wonder if we are approaching this the right way...) is the following:
We work on the default branch ('d' on the poor-man's-graph that follow):
d -o-o-o-o-
We finish a sprint and trigger an End-of-Sprint job (using Jenkins) which tags default with "Sprint 1":
d -o-o-o-o-o-
|
Sprint 1
To release Sprint 1 we update to stable branch ('s') and merge changes from the Sprint 1 tag revision and commit:
Sprint 1
|
d -o-o-o-o-o-
\
s -o-o-o-o-o-o-
Tag stable and commit:
Sprint 1
|
d -o-o-o-o-o-
\
s -o-o-o-o-o-o-o-
|
Release 1
Update to default and merge stable since default should stay a superset of stable, commit and push:
Sprint 1
|
d -o-o-o-o-o-o-o-o-o-
\ /
s -o-o-o-o-o-o-o-
|
Release 1
The problem is that when merging .hgtags from 's' to 'd' mercurial encounters a conflict which holds the release job from completing. The resulting .hgtags should contain information from both involved tags.
We have searched for a solution to this, and could probably automate these type of merge conflicts with some hooks and scripts, but it looks like an unnecessary and error-prone hack to support a workflow that otherwise seems nothing out of the ordinary.
Is there something inherently wrong with our approach that causes us to encounter these problems?
If not, what is the best way to solve these issues without having to rely on a scripts/hooks approach?
Is there a better approach that would support our workflow?
I would go for the special case hooks. The problem you're seeing is related to the Mercurial philosophy of versioning metadata in the same way as normal repository data. This is simple and effective, and leads to a system that's overall easier to understand. But in this case it also leads to your merge conflict.
The reason it leads to a merge conflict is relatively simple. The .hgtags file is just a text file with a bunch of lines in it. Each line contains a hash and the associated tag. In one branch you've added the Sprint 1 tag. In another branch you've added the Release 1 tag. These show up as one line being added to the end of the file in one branch, and a different line being added to the end of the file in another branch.
Then you merge the two branches. Suddenly Mercurial is faced with a decision. Which line should it take? Should it take both of them? If it were source code, there would really be no way to tell without human intervention.
But it isn't source code. It's a bunch of tags. The rule should be 'if the two lines being added refer to different tags, just take both of them'. But it isn't because Mercurial is treating it like a bog-standard text file that could be important source code.
Really, the .hgtags file should be handled in a fairly special way for merges. And it might actually be good to add code that handles it that way into mainline Mercurial to support your use-case.
IMHO Mercurial should be modified so that the .hgtags file would only give you a conflict warning if you have two different hashes for the same tag. The other weird case would be if you have a tag with a hash that isn't an ancestor of the change in which the tag appears. That case should be called out somehow when doing a merge, but it isn't really a conflict.
I suspect you're merging the tagged changeset from default to stable. If you merge the tagging changeset instead, you shouldn't get the merge conflict when you merge the second (probably also tagging!) changeset back to default.
I want to pull a set of changesets from a certain branch in a remote repository. One of the changesets is a merge from another branch, which I don't want to pull. However, it will be pulled even if I specify the branch name:
hg pull -r REV -b mybranch REMOTE_REPO
Is there a way to pull this commit as a regular changeset, ignoring its other ancestors?
No, this is impossible. All changesets (whether they are regular or merge changesets) depend on their ancestors and cannot be pulled in isolation. This is a fundamental design decision in Mercurial.
Merging prematurely results in the annoying situation you describe — each branch is no longer clean and cannot be pulled without also pulling in other stuff. The best way to avoid this is to use rebase (if the development is local-only and thus elegible for rebasing) or to simply ask people to stop mixing unrelated things together until you can make a firm decision about what needs to be merged.
In CVS I have a branch (b) off another branch (a) which is off the trunk/head.
Some bug fixes were made in branch (a) that I'd like to go ahead and use in branch (b). How can I pull those fixes into my branch in Eclipse?
head
|
v
a (with bug fixes)
|
v
b (needs bug fixes)
Ideally what you need is to have two tags on a for every feature you want to merge, and then merge the difference between those two tags into b. However, you would also need to remember which ones you have already merged, because CVS doesn't remember that.
When I was working in a company that used CVS and branches, our policy was that bugfixes from branches (a in this case) that ought to be used by other branches need to get merged into the trunk first, and all the other branches merge them from there.
However, it was still very painful if you wanted to cherry-pick individual bugfixes. Essentially, you'd have to remember every fix you've merged (by two tags, marking the beginning and the end of the changes making up that fix).
Generally, in CVS it's much better to remember (in a tag) up to which revision you have merged, and merge everything from there to the head (and then move the tag to the head). In CVS, cherry-picking is painful and requires you to store the merge history somewhere.
When SVN with merge tracking works, it's really nice, I love it. But it keeps getting twisted up. We are using TortoiseSVN. We continuously get the following message:
Error: Reintegrate can only be used if revisions 1234 through 2345 were previously merged from /Trunk to the reintegrate source, but this is not the case
For reference, this is the method we are using:
Create a Branch
Develop in the branch
Occasionally Merge a range of revisions from the Trunk to the Branch
When branch is stable, Reintegrate a branch from the branch to the trunk
Delete the branch
I Merge a range of revisions from the trunk to the branch (leaving the range blank, so it should be all revisions) just prior to the reintegrate operation, so the branch should be properly synced with the trunk.
Right now, the Trunk has multiple SVN merge tracking properties associated with it. Should it? Or should a Reintegrate not add any merge tracking info?
Is there something wrong with our process? This is making SVN unusable - 1 out of every 3 reintegrates forces me to dive in and hack at the merge tracking info.
This problem sometimes happens when a parial merge has been done from trunk to branch in the past. A partial merge is when you perform a merge on the whole tree but only commit part of it. This will give you files in your tree that have mergeinfo data that is out of sync with the rest of the tree.
The --reintegrate error message above should list the files that svn is having a problem with (at least it does in svn 1.6).
You can either:
Merge the problem files manually from trunk to branch, using the range from the error message. Note: you must subtract 1 from the start of the range, so the command you'd run would be:
cd <directory of problem file in branch working copy>
svn merge -r1233:2345 <url of file in trunk>
svn commit
or
If you're certain that the contents of the files in your branch are correct and you just want to mark the files as merged, you could use the --record-only flag to svn merge:
cd <directory of problem file in branch working copy>
svn merge --record-only -r1233:2345 <url of file in trunk>
svn commit
(I think you can use --record-only on the entire tree, but I haven't tried it and you'd have to be absolutely sure that there are no real merges that need to come from trunk)
Bunny hopping might be the solution.
Basically, instead of continuously merging trunk changes into a single branch (branches/foo, let's call it), when you want to pull those changes from trunk:
Copy trunk to a new branch (branches/foo2).
Merge in the changes from the old branch (merge branches/foo into branches/foo2).
Delete the old branch (delete branches/foo).
Your problem is that you're trying to use Reintegrate merge on a branch that has been 'corrupted' by having a 'half merge' already done on it. My advice is to ignore reintegrate and stick to plain on revision merging if this is your workflow.
However, the big reason you get errors is because SVN is performing some checks for you. In this case, if the merge has extra mergeinfo from individual files in there, then svn will throw a wobbly and prevent you from merging - mainly because this case can product errors that you might not notice. This is called a subtree merge in svn reintegrate terminology (read the Reintegrate to the Rescue section, particularly the controversial reintegrate check at the end).
You can stop recording mergeinfo when you perform your intermediary merges, or just leave the branch alone until its ready - then the merge will pick up changes made to trunk. I think you can also byass this check by only ever merging the entire trunk to branch, not individual files thus keeping mergeinfo safe for the final reintegrate at the end.
EDIT:
#randomusername: I think (never looked too closely) at moving is that it falls into the 'partial merge' trap. One cool feature of SVN is that you can do a sparse checkout - only get a partial copy of a tree. When you merge a partial tree in, SVN cannot say that the entire thing was merged as it obviously wasn't, so it records the mergeinfo slightly differently. This doesn't help with reintegrate as the reintegrate has to merge everything back to the trunk, and now it finds that some bits were modified without being merged, so it complains. A move appears kind of the same thing - a piece of the branched tree now appears differently in the mergeinfo than it expects. I would not bother with reintegrate, and stick with the normal revision range merge. Its a nice idea, but it trying to be too many things to too many users in too many different circumstances.
The full story for mergeinfo is here.
I suspect you're not following the merge instructions correctly:
"Now, use svn merge with the --reintegrate option to replicate your branch changes back into the trunk. You'll need a working copy of /trunk. You can get one by doing an svn checkout, dredging up an old trunk working copy from somewhere on your disk, or using svn switch (see the section called “Traversing Branches”). Your trunk working copy cannot have any local edits or contain a mixture of revisions (see the section called “Mixed-revision working copies”). While these are typically best practices for merging anyway, they are required when using the --reintegrate option.
Once you have a clean working copy of the trunk, you're ready to merge your branch back into it:"
I have few problems with merging.