I tried to post this earlier but think I posted as an Answer to a related post.
Here is a link to that post though as it is related :
UnityException: get_time is not allowed to be called from MonoBehaviour constructor
Like the original poster, I too am new in Unity and going through the same workshop.
My question was specifically related to this response someone provided on that post :
That response was provided as a solution, however I am struggling to implement it and wondering if someone can :
1-type out complete code block because since only the Start () was called out as a solution I suspect I am typing it incorrectly because...
2-Even though I am toggling the time variable I am not seeing any change in the delay when pressing the spacebar. Sure, there is a delay, but it is not different if I change the variable to 50f or 15f or 5f.
Any help is appreciated thanks
I tried entering code block in Unity in order to put a delay on the spacebar when pressed.
What happened was the delay interval did not change when I tested the code block by editing the variable to put different floats in for time, i.e. 50f, 10f, 25f, the delay time did not change on screen when the game was running.
Related
I am making a game where you must open or activate the UI with the space bar. Now, this works perfectly fine, but it is pretty annoying that every time you open the UI you must click on the inputfield to write in it. Is there any way around this? So is there a way to open or activate the UI without having to click on the field to be able to write in it?
I looked for YouTube videos and tried to find similar problems in other forums, but wasn't able to find a script, nor was I able to find some Unity settings to do so.
You could use e.g.
private class SelectOnEnable : MonoBehaviour
{
private void OnEnable()
{
EventSystem.current.SetSelectedGameObject(null);
EventSystem.current.SetSelectedGameObject(gameObject);
}
}
and attach it to whatever object that should become the selected one everytime it is enabled. See EventSystem.SetSelectedGameObject
Can't test it right now but it might still require the User to hit Enter in order to also actually set the Input field into edit mode. The upper line only sets it as selected UI element (similar to using TAB in a browser).
Otherwise I think you would go through
yourInputField.DeactivateInputField()
yourInputField.ActivateInputField();
to directly set it active. See InputField.ActivateInputField. Might have to do both in combination - again can't test right now ;)
Thank you very much, derHugo! Everything works like a charm now! You saved me a lot of time. Referring to your last comment, I used both of them, and it seems to work very well for me. Here is the code I used:
`private void OnEnable()
{
EventSystem.current.SetSelectedGameObject(gameObject);
GameManager.GetComponent().inputFieldInMainUi.ActivateInputField();
EventSystem.current.SetSelectedGameObject(null);
GameManager.GetComponent<InputFieldComparision>().inputFieldInMainUi.DeactivateInputField();
}`
I try to handle some events during animations, but everywhere I look, every tutorial have access to AnimatorEvent Inspector like this:
A nice simple field, where you can select a function, I want this!
But instead of this, I always getting this sick 5 fields view, and don't have any idea how to handle animation event in this case!
I tried to create function test() with debug log, but it didn't work anyway. Why I can't get access to this simple window where I can choose an function?
You will need to add this animation into a State in Animator Controller (via Animator Window).
In the object which contains Animator component, attach your script component to it.
Open the Animation window, select the object above, you will see a dropdown of animations (top left) which Animator Controller of this object contains. Choose and add event to the animation you want to.
Select the event in Animation Window, in the Inspector, you should see the dropdown of public functions of your script component attached above.
Answer by Aluminium18
Sometimes it doesn't work even if you do all things according to tutorials or advices in internet. I often leave Unity editor launched for a long time without any interactions with it. After several gibernations and several days it can get buggy - various errors appear, you can't see some functions from scripts and so on. So, just reloading the Unity editor solves many of such issues for me. And it continues to happen so for several years no matter what Unity version you have. I tried versions from 2019.x.x to 2022.x.x - all this time Unity behaves itself the same.
I am facing issue with callbacks. I have 3 drop downs, one scattermap , one table and one slider on the screen and they all need to work in tandem and i have 5 call backs. When i execute the application all my callbacks associated with these controls execute in random order. After that when i click on scattermap it may or may not work. Say we assume it worked. Then i can navigate all around without any hassle. Then if i execute the application then click on the scattermap then as i mentioned it may or may not work. Say suppose it didn't work this time. If so is the case it will not work at all no matter what i do and simulaneously one specific dropdown also becomes dysfunctional. However if click any of the other two drop downs then evrything will start functioning as normal.
I have digged really deep into this and figured out that this has nothing to do with my code. The underlying issue is that when the click doesn't work the reason the reason behind that is the callback isn't getting triggered. I found out this by applying some debugging techniques and i am 100% sure the callback is not firing. Can anyone help me resolve/understand this please.
I have a database that I work on using Access 2013, though I must maintain compatibility with Access 2010; I am using Windows 7.
I have an input form that is set to Pop Up = Yes, and Modal = No. When opening this input form directly from the Navigation Pane, it functions perfectly normally.
I have a macro in a search form that calls up this input form with the specified record using the "OpenForm" action. When opening the input form with this macro, the form's background is totally garbled (it pulls the background image from whatever was behind it when called, as though it were transparent), and all labels are unreadable.
That said, if I run the macro again by trying to open a different record, the form then appears correctly until it is closed. Also, if I change the "Window Mode" in the "OpenForm" action to "Dialog" rather than "Normal," it appears correctly.
Neither of these are valid solutions, though -- it should work on the first time, and I do not want the form to be modal. All my code seems okay (insomuch as I am not receiving error messages), so I don't understand why it would be doing this... any guidance is very much appreciated.
I have discovered what is causing this problem, though I don't understand why.
The macro I am using came from a sample database, and has some commands I am not fully familiar with. One such command is "Requery."
I experimented with removing various parts of the macro with the window mode as "Normal" for the "OpenForm" command. As soon as I tried removing "Requery" (and nothing else) the window opened in "Normal" mode with no distortion whatsoever.
In short, having "Requery" in the macro was what was causing this error to occur. It seems like an innocuous enough action (all it does is refresh data, from what I understand, as described here: https://msdn.microsoft.com/en-us/library/bb177360(v=office.12).aspx), but since I don't see why its inclusion was necessary anyway (if anyone could shed some light on that, it would be appreciated), it looks like this is essentially solved.
I hope this may help someone else in the future!
I'm still pretty new to scripting in Unity3D, and I'm following along with a tutorial that uses GUI.Button() to draw a button on the screen.
I am intrigued by how this function works. Looking through the documentation, the proper use of GUI.Button is to invoke the function in an if statement and put the code to be called when the button is pushed within the if statement's block.
What I want to know is, how does Unity3D "magically" delay the code in the if statement until after the button is clicked? If it was being passed in as a callback function or something, then I could understand what was going on. Perhaps Unity is using continuations under the hood to delay the execution of the code, but then I feel like it would cause code after the if statement to be executed multiple times. I just like to understand how my code is working, and this particular function continues to remain "magical" to me.
I don't know if it's the right term, but I usually refer to such system as immediate mode GUI.
how does Unity3D "magically" delay the code in the if statement until
after the button is clicked?
GUI.Button simply returns true if a click event happened inside the button bounds during last frame. Basically calling that function you are polling: every frame for every button asking the engine if an event which regards that button (screen area) is happened.
If it was being passed in as a callback function or something, then I
could understand what was going on
You are probably used to an MVC like pattern, where you pass a controller delegate that's called when an UI event is raised from the view. This is something really different.
Perhaps Unity is using continuations under the hood to delay the
execution of the code, but then I feel like it would cause code after
the if statement to be executed multiple times.
No. The function simply returns immediately and return true only if an event happened. If returns false the code after the if won't be executed at all.
Side notes:
That kind of system is hard to maintain, especially for complex structured GUI.
It has really serious performance implications (memory allocation, 1 drawcall for UI element)
Unless you are writing an editor extension or custom inspector code, I'd stay away from it. If you want to build a menu implement your own system or use an external plugin (there are several good ones NGUI, EZGUI,..).
Unity has already announced a new integrated UI System, it should be released soon.
Good question. The unity3d gui goes through several event phases, or in the documentation
Events correspond to user input (key presses, mouse actions), or are UnityGUI layout or rendering events.
For each event OnGUI is called in the scripts; so OnGUI is potentially called multiple times per frame. Event.current corresponds to "current" event inside OnGUI call."
In OnGUI you can find out which event is currently happening with >Event.current
The following events are processed link:
Types of UnityGUI input and processing events.
-MouseDown
-MouseUp,mouse button was released
-MouseMove,Mouse was moved (editor views only)
-MouseDrag,Mouse was dragged
-KeyDown, A keyboard key was pressed
-KeyUp A keyboard key was released.
-ScrollWheel The scroll wheel was moved.
-Repaint A repaint event. One is sent every frame.
-Layout A layout event.
-DragUpdated Editor only: drag & drop operation updated.
-DragPerform Editor only: drag & drop operation performed.
-DragExited Editor only: drag & drop operation exited.
-Ignore Event should be ignored.
-Used Already processed event.
-ValidateCommand Validates a special command (e.g. copy & paste).
-ExecuteCommand Execute a special command (eg. copy & paste).
-ContextClick User has right-clicked (or control-clicked on the mac).
Unity GUI has much improved lately and is quite usefull if you want to handle things programmatically. If you want to handle things visually, i recommend looking at the plugins heisenbug refers to.
If you decide to use unity gui, i recommend using only one object with ongui, and let this object handle all your gui.