I remember watching a webcast from Mark Russinovich showing the sequence of keyboard keys for a user initiated kernel dump. Can somebody refresh my memory on the exact order of the keys.
Please note this is for XP.
http://psacake.com/web/jr.asp contains full instructions, and here's an excerpt:
While it may seem odd to think about purposefully causing a Blue Screen Of Death (BSOD), Microsoft includes such a provision in Windows XP. This might come in handy for testing and troubleshooting your Startup And Recovery settings, Event logging, and for demonstration purposes.
Here's how to create a BSOD:
Launch the Registry Editor (Regedit.exe).
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\i8042prt\Parameters.
Go to Edit, select New | DWORD Value and name the new value CrashOnCtrlScroll.
Double-click the CrashOnCtrlScroll DWORD Value, type 1 in the Value Data textbox, and click OK.
Close the Registry Editor and restart Windows XP.
When you want to cause a BSOD, press and hold down the [Ctrl] key on the right side of your keyboard, and then tap the [ScrollLock] key twice. Now you should see the BSOD.
If your system reboots instead of displaying the BSOD, you'll have to disable the Automatically
Restart setting in the System Properties dialog box. To do so, follow these steps:
Press [Windows]-Break.
Select the Advanced tab.
Click the Settings button in the Startup And Recovery panel.
Clear the Automatically Restart check box in the System Failure panel.
Click OK twice.
Here's how you remove the BSOD configuration:
Launch the Registry Editor (Regedit.exe).
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\i8042prt\Parameters.
Select the CrashOnCtrlScroll value, pull down the Edit menu, and select the Delete command.
Close the Registry Editor and restart Windows XP.
Note: Editing the registry is risky, so make sure you have a verified backup before making any changes.
And I may be wrong in assuming you want BSOD, so this is a Microsoft Page showing how to capture kernel dumps:
https://web.archive.org/web/20151014034039/https://support.microsoft.com/fr-ma/kb/316450
As far as I know, the "Create Dump" command was only added to Task Manager in Vista. The only process I know of to do this is using the adplus VBScript that comes with Debugging Tools. Short of hooking into dbghelp and programmatically doing it yourself.
You can setup the user dump tool from Microsoft with hot keys to dump a process. However, this is a user process dump, not a kernel dump...
I don't know of any keyboard short cuts, but are you looking for like in task manager, when you right click on a process and select "Create Dump"?
Related
I have the PowerShell extension installed under VSCode. When I open up a PowerShell script, VS Code automatically pops open a "PowerShell Integrated Console" window in my terminal. It's different from the normal PowerShell terminal:
It's better than the default one because keyboard shortcuts like Ctrl+Backspace to delete a word work. But when I try to open one of these fancy terminals myself, the option isn't there:
How can I get one of these improved terminals without opening a script file, and how can I get VSCode to use them automatically instead of the old PS terminal?
Note:
Normally, a PIC (PowerShell Integrated Console) is automatically created the first time you open a PowerShell source-code file for editing in a session.
The instruction below show to how to directly create a PIC, which may also be helpful if you need to restart it after a crash - though you're usually prompted to create a new one when that happens.
Instruction as of v2022.12.1 of the PowerShell extension for VSCode (Visual Studio Code):
Execute the PowerShell: Show Session Menu command from the command palette (Ctrl-Shift-P).
This will create a PIC and show a submenu, which you can simply dismiss with Esc.
Note: If the PowerShell extension was already loaded but the PIC has crashed, choose Restart Current Session from the submenu instead.
Additionally, you may assign a keyboard shortcut to the command, by clicking the cog icon on the right edge of the command palette entry.
Because the PIC doesn't have an external executable entry point you can not define it as a custom shell profile (at least as of VSCode 1.67.1).
GitHub issue #3918 discusses implementing simpler ways to activate / load the PIC on demand as a future enhancement:
Making the PIC show in the list of available shells (as shown in your question, analogous to the extension-contributed JavaScript Debug Terminal entry) is one of the suggestions, but the concern is that there can only be one PIC as of this writing, so such an entry would behave differently from other shells in the list, which create a new session every time.
However, this concern would go away if support for multiple PICs were to be implemented, which is being proposed in GitHub issue #2418.
I have a system that I want to lock down, only running certain programs.
All is working so far when I use "Run only specified Windows applications" (under Local Computer\User Configuration\Administrative Templates\System) except when I try to add an option to remove media.
I have the policy enabled with a list of all applications I want to be able to load. And this: "rundll32.exe shell32.dll, Control_RunDLL HotPlug.dll"
but when I run my shortcut for this I just get the error "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator"
I saw someone online with a similar problem with rundll32.exe but that was with a printer and they got it working by adding a printui.dll. Am I missing something or doing something wrong or is this not possible? I need this option because I have to disable right click in our locked down system.
I have an application which uses Office Word on particular click. I need to see behavior when word is not installed on my machine. Can we replicate this by doing some settings as I do not want to uninstall word.
Go to the control panel. Navigate to add or remove programs. Click on "Microsoft Office..." (version information will be in place of ellipsis). Click "Change" then when the dialog box appears for the Change process click the "Add or Remove Features" then Next then disable Microsoft Word and continue through the process. To re-enable go back through the process and enable Microsoft Word.
I recently needed to do this to test a new process on machine with MS Word and without MS Word. This way is much faster than installing or copying your test code to a different machine that does not have MS Word installed.
When developing in Rational Application Developer 7 I regularly run SQL queries to confirm DB state and get info for test data. I have a .SQL file with various SQL snippets in it which I use and can highlight the relevant lines I want to run. However I then have to right click with the mouse and select "Run SQL" from the menu.
There is no keyboard shortcut assigned to this command and my attempts to set one up via
Window > Preferences > General > Keys
have been unsuccessful. "Run SQL" appears under "uncategorized" rather than "Run" but attempts to assign a keyboard shortcut to it have been unsuccessful.
Has anyone else come across this issue? I can't believe I'm the only one who finds this annoying when there are so many other shortcuts set up to speed things up...
From the bug 238890 (2008), this feature has never been intended to become a full run configuration.
The user should use 'Execute Selected' context menu. The 'Run' is designed for
running stored procedures.
Logged into my Windows XP SP2 computer using my normal user account (which has Local Admin privileges), when I start the BDE Administrator -- either from the Control Panel or from the BDEADMIN.EXE directly -- I never get the GUI. It shows up on my task bar, and shows up in the Task Manager, but the GUI never appears. I can close the program by right-clicking on the task bar and choosing close. (note that "never" means not within 5 minutes of launching the program)
If I log into the same exact computer using a different user account (which also has Local Admin privileges), when I start the BDE Administrator, it loads the GUI within a couple seconds.
I used to be able to use the BDE Administrator while logged in under my normal user account, so it's not like this has always been a problem.
While this issue may not be directly programming related, it does make developing and testing a pain when I have to log off and back on a couple of times just to make changes to my BDE configuration.
I am totally stumped. Any idea what might be causing this odd behavior?
One idea is that you may have had two screens running on this box and dragged the window off screen.
Just search for the registry keys that control where the window opens up and delete them. Alternatively, you should be able to right click on the program in the task bar and select Move. Then use your arrow keys to bring it back.
Regardless, I'm voting to close.