I am new to kony, Does anyone know how to restart the memcached server and location of start and stop files ? please help.
thanks
If you server running in Linux server use following comment
%KMAP_SERVER_HOME%\memcached\memcached -p 21201
if your server in windows
double click %KMAP_SERVER_HOME%\memcached\memcached.exe
Please make sure that your middle ware is memcache enabled.
to check your memcache status use following Linux comment
echo status | nc 21201
Related
I don't know a lot of things for server, but my provider sent me a message and it says to add a password to memcached.
I believe that is on the server.
How / Where can I check it? Or how to check if memcached is running in SSH?
watch 'php -r '"'"'$m=new Memcache;$m->connect("127.0.0.1", 11211);print_r($m->getstats());'"'"
I just downloaded Netbeans IDE7 with the Glassfish 4.
I just made a project to test it out and see how it goes, and I got this error right from the start:
Could not start GlassFish Server: DAS port is occupied while server is not running
[location]: Deployment error: Could not start GlassFish Server: DAS port is occupied while server is not running
See the server log for details.
BUILD FAILED (total time: 1 second)
I have reinstalled it three times, with the Glassfish and without and then later add it to Netbeans, i changed the domain.xml name="admin-listener" port="4848" to something different
i did this cmd code netstat -aon | find ":80" | find "LISTENING" and closed the programm.
i ran as administrator i think i did almost everyting but it wont simply run, and it keeps returning to the same error
usually i would have given up but this software is required for a school project.
i will try everything.
i hope someone can help me.
Thx in advance
You have to find the process that has taken the port you need. You can try finding it by running the terminal with the command:
netstat -aon | find ":80" | find "LISTENING"
Find the information you need and than kill the process with specific PID in Task Manager.
I hope you find this useful,
Thanks.
A few points:
Why not download NetBeans 8 that also includes GlassFish 4?
Assuming that you have successfully figured out that no other process is listening on port 4848, then Which version of the JDK are you using? Can you try JDK 7 if you are using JDK 8?
Looks like you are not alone - see NetBeans bug 237477.
Note that this isn't the only problem. I run on a Mac and can use the asadmin start command successfully on the remote server. IF I try to start it from NetBeans, it gives me this message.
One hint might be that the domain.xml file is set so that the listening port is 9090, the properties screen for the remote server, which I entered 9090 for, tells me the HTTP port is 23043. I can't edit it. Everytime I try to create that remote server it sets it to this value. The server will run fine if I start it by hand on the remote server, but NetBeans doesn't think it is running.
This occurs because I had to select domain2 because NetBeans says domain1 is already registered on my local machine. I wanted to have a local domain1 and a remote domain1 that are identical so I can test locally, and then deploy remotely.
This error message could be misleading, because it is the same when IP adress of glassfish server in netbeans settings is wrong (not port).
By my experience with this over win 8.1 + Netbeans 8.0 + Glassfish 4.0
The problem resides in permission of folder in windows that block the server execution
I solve the problem changing the permission of the glassfish/domain/domain1 folder for xxxx/user to totalcontrol
If this not solve your problem, try launch the server over console:
asadmin start-domain --verbose
And read the exceptions to try solve the problem.
-EDIT:
Reading other post to try help:
like this: Glassfish server started failed in netbeans 6.9
Or check your firewall:
allow >> C:\Program
Files\glassfish-X.X\glassfish\modules\glassfish.jar
In my case when using the command
netstat -aon | find ":4848" | find "LISTENING"
I noticed that one process was occupying this port. When checked what it was I noticed it was VMWare NAT controller, because I previously had configured a network adapter to listen to this port.
Just stopped all VMWare related services (in my case I didn't need them for development purposes), and solved the problem.
Go to Task Manager -> Services -> Stop Process whose PID IS 3136,2268,2468 ,23.... and near Range in PID. All processes near to the web server's PID.
It works for me on Windows 8.1 pro & Windows 7.
I had the same error message.
Turned out it was caused because my firewall blocked port 4848
May be late but I solved this issue by deleting the app server from the Netbeans and by adding it again. In my case Netbeans 8.2 and Payara 4.1 instead of Glassfish.
If you changed the host of Glassfish server then set it to localhost it should work.
I'm not sure if this is more of a sysadmin question but in order to use x-debug, I have to run the following from my terminal everytime I boot up the machine.
setsebool httpd_can_network_connect=1
Does anyone know how I can make this permanent so that I don't have to run this command everytime I start my machine?
Thank you.
----EDIT----
setsebool -P httpd_can_network_connect=1
Now I can debug as soon as the machine boots thanks to Ulrich Schmidt-Goertz
Try running the command with the -P flag. That should make the setting permanent.
I am unable to login to Answers (/analytics) after every time I deploy the metadata repository of OBIEE using Enterprise manager, on Linux. It works after I refresh the GUIDs. Is there a way to avoid refreshing GUIDs?
Open the rpd offline before deployment, Goto Manage -> Identity->users
Check if your users are there in the rpd, if so remove them. Now deploy your rpd on your target instance. This should go fine. You wont have to reset GUIDs...
Cheers,
RamC
Yes there is.
Stop BI Server
opmnctl stopproc ias-component=coreapplication_obis1
Backup the original repository
cp repository1.rpd repository2.rpd
Modify repository1.rpd on a Windows machine and copy it back to the Linux machine running OBIEE
Start BI Server
opmnctl startproc ias-component=coreapplication_obis1
Stop Services in Linux:
1.Stop opmnctl
Navigate to /instances/instance1/bin
./opmnctl stopall
2.Stop Managed Server (bi_server1)
Navigate to /user_projects/domains/bifoundation_domain/bin
./stopManagedWebLogic.sh bi_server1
3.Stop Admin Server (weblogic)
in the same above location
./stopWebLogic.sh
4.Stop Node manger
Just kill the Node Manager process
ps -ef|grep node –to find nodemanger pid
kill -9
Note: If Managed and Admin server not stopped properly ,you can kill same way like above
ps -ef|grep weblogic
kill -9
Start Services:
======================
1.Start Node Manager
Navigate to /wlserver_10.3/server/bin
nohup sh startNodeManager.sh &
2.Start Admin Server
Navigate to /user_projects/domains/bifoundation_domain/bin
nohup sh startWebLogic.sh -Dweblogic.management.username=weblogic -Dweblogic.management.password=weblogic123 > admin_server.log &
Tip: you can check log using tail command
tail -f admin_server.log
ctrl-z or ctrl-c to exit log window
3.Start Managed Server (bi_server1)
In the same above location
nohup sh startManagedWebLogic.sh bi_server1 http:// managed_server.log &
Start opmnctl
Navigate to /instances/instance1/bin
./opmnctl startall
I want to remote debug the nodejs program in Eclipse. I start the node script with the debug option.
$node debug script.js
But I can't connect to the node in Eclispe. When I netstat the node's TCP port. I found that node only listen 127.0.0.1 in debug mode. So I can't connect it from different computer.
But I can't find any startup options that can change to listen to any address.
Anyone know to make it listen to any address to remote debug in other computer?
if anyone else stumble upon this: you can set the node debug to any address as you set the port
node --debug=169.168.1.2:5858 app.js
if that would be the ip of your remote machine or even better to every machine
node --debug=0.0.0.0:5858 app.js
but please be aware that the 2nd option should only be used if you are debugging in your own private network as you open it up for everyone
This is what I do in linux Debian:
install balancer
sudo apt-get install balance -y
then create a route in balancer to reroute your 5858 port to 5859
balance 5859 127.0.0.1:5858
start your app
node --debug app.js
now you can access it from everywhere on port 5859
I'm looking into V8 code that goes through deps/v8/src/debug-agent.* down to deps/v8/src/platform-posix.cpp (for linux) to POSIXSocket::Bind method and it can't seem to have any option about this (unless I'm missing something).
I bet you either hack it and recompile node or you'll need to build a small proxy beside your node process.
Here's a great tut on debugging nodejs from eclipse. Note at the bottom there is a script the author uses to forward localhost:5858 to the remote server's 127.0.0.1. You could also just use an SSH tunnel.
So, to summarize:
start your script with node --debug app.js
configure eclipse as if you were debugging locally
use the node_g script or configure an SSH tunnel
go on vacation now that your code is bug-free
to debug nodejs remotely over SSH session do:
1. install balance on Linux: https://balance.inlab.net/overview/
2. run the command: balance -df 8585 127.0.0.1:5858 > /tmp/balance.out 2>&1 &
3. ssh to your remote Linux box (tunnel will be created 8585 > 5858 > nodejs)
4. run your node script on server: node --debug-brk --nolazy ./myNodeApp.js
5. kick off debug session in WebStorm alt-d to port 8585
now you are remote debugging securely over SSH session