I would like to make a list of remarkable robot simulation environments including advantages and disadvantages of them. Some examples I know of are Webots and Player/Stage.
ROS will visualize your robot and any data you've recorded from it.
Packages to check out would rviz and nav_view
This made me remember the breve project.
breve is a free, open-source software package which makes it easy to build 3D simulations of multi-agent systems and artificial life.
There is also a wikipage listing Robotics simulators
Microsoft Robotics Studio/Microsoft Robotics Developer Studio 2008
Also read this article on MSDN Magazine
It all depends on what you want to do with the simulation.
I do legged robot simulation, I am coming from a perspective that is different than mobile robotics, but...
If you are interested in dynamics, then the one of the oldest but most difficult to use is sd/fast. The company that originally made it was acquired by a large cad outfit.
You might try heading to : http://www.sdfast.com/
It will cost you a bit of money, but I trust the accuracy of the simulation. There is no contact or collision model, so you have to roll you own. I have used it to simulate bipeds, swimming fish, etc.. There is also no visualization. So, it is for the hardcore programmer. However, it is well respected among us old folk.
OpenDynamics engine is used by people http://www.ode.org/ for "easier" simulation. It comes with an integrator and a primitive visualization package. There are python binding (Hurray for python!).
The build in friction model.. is ... well not very well documented. And did not make sense. Also, the simulations can suddenly "fly apart" for no apparent reason. The simulations may or may not be accurate.
Now, MapleSoft (in beautiful Waterloo Canada) has come out with maplesim. It will set you back a bit of money but here is what I like about it:
It goes beyond just robotics. You can virtually anything. I am sure you can simulate the suspension system on a car, gears, engines... I think it even interfaces with electrical circuit simulation. So, if you are building a high performance product, than MapleSim is a strong contender. Goto www.maplesoft.com and search for it.
They are pretty nice about giving you an eval copy for 30 days.
Of course, you can go home brew. You can solve the Lagrange-Euler equations of motion for most simple robots using a symbolic computation program like maple or mathematica.
EDIT: Have not be able to elegantly do certain derivatives in Maple. I have to resort to a hack.
However, be aware of speed issue.
Finally for more biologically motivated work, you might want to look at opensim (not to be confused with OpenSimulator).
EDIT: OpenSim shares a team member with SD/Fast.
There a lots of other specialized simulators. But, beware.
In sum here are the evaluation criteria for a simulator for robot oriented work:
(1) What kind of collision model do you have ? If it is a very stiff elastic collision, you may have problem in numerical stability during collisions
(2) Visualization- Can you add different terrains, etc..
(3) Handy graphical building tools so you don't have to code then see-what-you-get.
Handling complex system (say a full scale humanoid) is hard to think about in your head.
(4) What is the complexity of the underlying simulation algorithm. If it is O(N) then that is great. But it could be O(N^4) as would be the case for a straight Lagrange-Euler derivation... then your system just will not scale no matter how fast your machine.
(5) How accurate is it and do you care?
(6) Does it help you integrate sensors. For mobile robots you need to have a "robot-eyes view"
(7) If it does visualization, can it you do things like automatically follow the object as it is moving or do you have to chase it around?
Hope that helps!
It's not as impressive looking as Webots, but RobotBasic is free, easy to learn, and useful for prototyping simple robot movement algorithms. You can also program a BasicStamp from the IDE.
I've been programming against SimSpark. It's the open-source simulation engine behind the RoboCup 3D Simulated Soccer League.
It's extensible for different simulations. You can plug in your own sensors, actuators and models using C++, Ruby and/or RSG (Ruby Scene Graph) files.
ABB has a quite a solution called RobotStudio for simulating their huge industrial robots. I don't think it's free and I don't guess you'll get much fun out of it but it's quite impressive. Here's a page about it
I have been working with Carmen http://carmen.sourceforge.net/ and find it useful.
One of the disadvantages with Carmen is the documentation with all respect I think the webpage is a bit outdated and insufficient. So I like to hear from other people with experience in working with Carmen, or student reports/projects dealing with Carmen.
You can find a great list with simulation environments http://www.intorobotics.com/robotics-simulation-softwares-with-3d-modeling-and-programming-support/
MRDS is one of the best and it's free. Also LabView is good to be used in robotcs
National Instruments' LabView is a graphical programming environment for developing measurement, test, and control systems.
It could be used for 3D control simulation with SolidWorks.
MRDS is free and is one of the best simulation environment for robotics. Workspace also can be used, and please check this link if you want a complete list with robotics simulation software
Trik Studio has a nice and clear 2D model simulator and also visual and textual programming programming environments for them. They also soon will support 3D modeling tools based on Morse simulator. Also it is free and opensource and has multi-language interface.
Related
I recently got interested in Theo Jensen's strandbeest, (If you haven't seen them before look them up! Such incredible engineering.) and I want to mess around with the design he has for his strandbeests' legs. However doing straight forward kinematics is waaay over my head for something like this.
Here's what I'm trying to model:
https://upload.wikimedia.org/wikipedia/commons/6/61/Strandbeest-Walking-Animation.gif
(Can't link directly because I don't have enough reputation :/)
All I really need to know is the path of the 'foot', so something visual isn't necessary.
The final goal is to be able to apply an evolutionary algorithm to it and see if I come up with the same linkage lengths as Theo did, or maybe improve them somehow, so if I there was some software that allowed scripts to be run, that'd be ideal.
Sorry if the question is kind of vague, I'm not all that sure what I'm looking for. Even if there is some maths/engineering topic that would make this easier I'd love to learn.
Thanks!
-Oisin.
Well, I searched for Physics Engine, and found a promising result.
Open Dynamics Engine seems to be an open source physics engine that could fit your needs.
The Open Dynamics Engine (ODE) is a free, industrial quality library for simulating articulated rigid body dynamics. Proven applications include simulating ground vehicles, legged creatures, and moving objects in VR environments. It is fast, flexible and robust, and has built-in collision detection.
Source: Wiki Introduction
There site is ode.org, and it looks like you should be able to evaluate it from there. "[S]imulating rigid body dynamics" is what you want, right? From what I understand, it ought to fit the bill. C++ is probably a reasonable language to attempt this in. I presume you have previous programming experience? This is not what I would consider a beginner's project.
When you get to the evolution, search for Genetic Algorithms. They're frequently used for optimization, and could help you out considerably. Another thing to consider is what you're actually optimizing for (lowest wind speed to function, fasted movement, etc).
I am trying to determine which of these two to buy for my work. I have used SIMULINK but not LabVIEW. Is there anyone who has used both and would like to provide some details? My investigation criteria are the user friendliness, availability of libraries and template functions, real-time probing facility, COTS hardware interfacing opportunity, quality of code generation, design for testability (i.e. ease of generating unit/acceptance tests), etc. However, if anyone would like to educate me with more criteria, please do so by all means!
For anyone who does not know about SIMULINK and LabVIEW - These are both Domain-Specific Languages (DSLs) intended for graphical dataflow modelling (and also code generation). These are multi-industrial tools and quite heavily used for engineering design and modelling.
IMPORTANT - I am quite interested to know if SIMULINK and LabVIEW offer real-time probing. For example, I have a model that I want to simulate. If there are variables associated to certain building blocks in that model, could I view them changing as the simulation continues? I know that it is certainly not possible with SIMULINK as it has a step-by-step debugger. I am not aware of anything similar in LabVIEW.
I really have not used LabVIEW and cannot obtain it temporarily as my work internet has got download restrictions and administrative privilege issues. This is the reason why I simply cannot use only NI website to draw conclusions. If there is any white paper available that addresses this issue, I would also love to know :)
UPDATE SINCE LAST POST
I have used MATLAB code generator and will not say that it is the best. However, I hear now that SIMULINK Embedded Coder is the best code generator and almost one of its own kind. Can anyone confirm whether or not this is good for safety critical system design i.e. generating code from safety-critical subsystem models. I know that the Mathworks is constantly trying to close the gap to achieve fully-flexible production-level C/C++ code generation.
I know that an ideal answer would be,"Depending on what you are trying to do, use a bit of both". And interestingly, I think I am heading to that direction. ATEOTD, it is a lot of money and need to be spent "nicely".
Thanks in advance.
I used labVIEW from 1995, and Simulink from 2000. Now I am involved in control system design, and simulation of robotic systems using labVIEW Real Time and automotive ECUs using MATALAB/Simulink/DSPACE .
LabVIEW is focus on measurement systems, and MATLAB/SIMULINK in dynamic simulation, so,
If you run complex simulations, and your work is create/debug complex simulation models of controllers or plants, use Simulink+RealTimeWorkShop+StateFlowChart. LabVIEW has no eficient code generators for dynamic simulation. RTW generates smaller and fastest code.
If your main work is developing systems with controllers and GUI for machines, or you want to deploy the controllers on field, use labVIEW.
If your main work is developing flexible HIL or SIL systems, with a good GUI, you can use VeriStand. Veristand can mix Simulink and LabVIEW code.
And if you have a big budget ( VERY BIG ) and you are working in automotive control prototypes, DSPACE hardware is a very good choice for fast development of automotive ECUS, or OPAL to develope electric power circuits. But only for prototype or HIL testing of controllers.
From the point of view of COTS hardware:
Mathworks don´t manufacture hardware -> Matlab/Simulink support hardware from several vendors.
National Instruments produce/sell hardware->LabVIEW Real Time is focused in support NationalInstruments hardware. There are no COTS full replacement.
I have absolutely no experience with Simulink, so I'll comment only on LV, although a quick read about Simulink on Wikipedia seems to indicate that it's focused mainly on simulation and modelling, which is certainly not the case with LabVIEW.
OK, so first of all, LV is NOT a DSL. While you wouldn't want to use it for any project, it's a general purpose programming language and you should take that into account. I know that NI has a simulation toolkit for LV, which might help you if that's what you're after, but I have absolutely no experience with it. The images I saw of it seemed to indicate that it adds a special kind of diagram to LV for simulation.
Second, LV is not restricted to any kind of hardware. It's a general purpose language, so you can write code which won't use any hardware at all, code which will use or run on NI's hardware or code which will use any hardware (be it through DLL calls, .NET assemblies, RS232, TCP, GPIB or any other option you can think of). There is quite a large collection of LV drivers for various devices and the quality of the driver usually depends on who wrote it.
Third, you can certainly probe in real time in LV. You write your code, just as you would in C or Java, and when you run it, you have several debugging options:
Single stepping. This isn't actually all that common, partially because LV is parallel.
Execution highlighting. This runs the code in slow motion, while showing all the values in the various wires.
Probes, which show you the last value that each wire had, where wires fill the same function that variables do in text based languages. This updates in real time and I assume is what you want.
Retain wire values, which allows you to probe a wire even after data passed through it. This is similar to what you get in text based IDEs with variables. In LV you don't usually have it because wire values are transient, so the value is not kept around unless you explicitly ask for it.
Of course, since you're talking about code, you could also simply write the code to display the values to the screen on a graph or a numeric indicator or to log them to a file, so there should be no need for actual probing. You could also add analysis code, etc.
Fourth, you could try downloading and running LV in a fully functional evaluation mode. If I remember correctly, NI currently gives you 7 days and then 45 days if you register on their site. If you can't do that on a work computer, you could try at home. If your problem is only with downloading, you could try contacting your local NI office and asking them to send you a DVD.
Note that I don't really know anything about modelling and simulation, so I have no idea what kind of code you would actually have to write in order to do what you want. I assume that if NI has a special module for it, then it's not something that you can completely cover in regular code (at least not if you want the original notation), but I would say that if you could write the code that does what you want in C, there's no reason you shouldn't be able to write it in LV (assuming, of course, that you know how to write code in LV).
A lot of the best answer would have to depend on your ultimate design requirements. Are you developing a product? If so, in what stage of development are you? Or are you doing research?
I recently did a comparison just as you are doing. I know LV, but was wanting to move towards a more hardware-scalable option, since NI HW is very expensive in volume. That is, my company was wanting to move towards a product. What LV and NI HW give you is flexibility. You can change code very quickly compared to C. On the other hand, LV does not run on nearly as many different HW platforms as C. So I wanted to find an inexpensive platform that would work well for real-time control and data acquisition, such that if we wanted to sell a product for, say, $30k, our controller wouldn't be costing $15k of that. We ended up with Diamond Systems Linux SBC's. Interestingly, Simulink ended up using the most expensive hardware! It did have a lot of flexibility, and could generate code, as well as model plants and controllers. But then, LV can do that as well.
As Yair wrote, LV has plenty of good debugging tools. One of the more interesting tools that is not so well known is the Suspend when Called option for a SubVI. This allows you to play with the inputs and outputs of a SubVI as much as you want while execution is paused.
MATLAB and Simulink are the defacto standard for control system design and simulation. Simulink controller models can be used for offline simulation in conjunction with plant models, all the way to realtime implementation on embedded targets. It is a general simulation framework with extensive built-in libraries as well as a la carte special purpose libraries, and can be extended through creation of custom blocks (S-function blocks) in C and other languages. It includes the ability to display values in graphs, numeric displays, gages, etc. while a nonrealtime simulation is taking place. Realtime target support from The Mathworks includes x86 (xPC Target) and several embedded targets (MPC555, etc.), and there is 3rd party support for other targets. The aforementioned dSPACE provides complete prototyping controllers including support for their quite powerful hardware. xPC Target includes support for a plethora of COTS PC data acquisition cards. Realtime target support includes GUI elements such as graphs, numeric displays gages, etc.
As I understand it (I have never really used it in anger), LabView only supports NI hardware, and is more hardware-oriented. Simulink supports hardware from multiple vendors, be it for data acquisition, or real-time implementation, but it may require a bit more work for the user to interface to his or her own hardware (less plug & play than LabView). On the other hand, Simulink provides tools to support the whole model-based design process, from modelling & simulation, control design, verification & validation, code generation, hardware-in-the-loop, etc...
Disclaimer: I used to work for MathWorks.
You guys may really be interested in Control Design adn Simulation Module for LabVIEW. It does a lot of simulations and in the future may be competitive to Simulink. I'm not a control engineer but I use it sometimes for simple testing and I'm glad that I don't have to learn Simulink from the beginning to do some work since I'm familiar with LabVIEW philosophy.
i'm a computer systems engineering undergraduate student, i just want to know what advantages MATLAB has over SCILAB and vice versa other than that SCILAB is freeware.
i mean from a computer engineer point of view.
thanks
I can't get into the nitty-gritty details, as I haven't used SCILAB extensively.
But from a bird's eye view, MATLAB is a very polished software, with decades of development behind it. And a price to match. It has a huge array of specialized packages, good support, a reasonably well designed UI, and it's generally user-friendly enough for non-computer engineers to work with. It's also very common in the industry, so it's not a bad thing to have on your resume.
But if you don't have very complex needs (which I suspect, given the use I made of MATLAB during my undergrad years) and you don't need the robustness and polish of a professional package, SCILAB will probably meet your needs.
And since it's based on the MATLAB language, what you'll learn can be transferred later on if your needs change, or you find yourself working in an environment where MATLAB is the default.
Scilab is to MATLAB as OpenOffice is to MS Office. That is to say, it's a not-quite-a-clone, and it's not as polished. You do get most of the functionality of MATLAB, and the price is much more agreeable.
That said, if you want a free/open pretend MATLAB, I personally prefer Octave, since the syntax is closer to MATLAB's.
If you aren't bothered about MATLAB compatibility, then check out the statistics language/environment R, which is delightful.
Matlab is the de-facto industrial standard, is ready now and here, and has a big firm behind to push it.
Scilab has been for long time the open source alternative, but honestly it never appealed me. I think that or they never belived enough on the project, or that you need too much money to make a valid product of this kind.
And it is a real pity, since we desperately need a good open source alternative, because being open source is the only way to be very efficient on different platform: actually matlab is very good at prototyping small-medium programs, but since it is closed source, it's very difficult to scale it up, to supercomputers for example, requiring often a complete rewrite of the code.
Sage might be the third way, it has a lot of potential, and I would bet on it. Check it. It doesn't reinvent the wheel like Scilab did, but take existing software and merge it in a new program. It is based on python which gained a lot of momentum in the computing world, since it has shown to be both easy enough to quick prototype, and versatile enough to run on exotic platforma like supercomputers or GPGPU.
# MatlabDoug
It is feasible in small-medium environment, but on very big task the flexibility of open source is invaluable.
Starting from low-level tool like open-mpi that allows you to finely tune your applications, through higher-level framework like PETSc that lift a lot of work from your shoulders, to java and python implementations that let you concentrate on the algorithms forgetting about many of the headaches of the lower level languages.
But the real proof is that an astonishing majority of the top500 supercompunters prefers open source alternatives.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
This is marked as a subjective question, I hope I won't get too many down votes though.
LV seems to offer a nice graphic alternative to traditional text based programming. As I understand, it's not a just-virtualization/data acquisition programming language. Nonetheless, it seems to have that paradigm pegged to its creator's name.
My question comes up because it doesn't seem to be widely used for multi-purpose applications. I'm not a LV-expert of any kind, I'm more like a learner. I'm still getting used to LV.
Labview is fantastic if you have National Instruments hardware, and want to do something like acquire, plot and log the data.
When you start interfacing to custom devices the wiring between modules gets complicated having to do all the string manipulation work for input and output to a device.
At my place of work, we found that we got annoyed with having to make massive, complicated VI's to interface to devices and started writing them in .NET and interfacing them to Labview.
In the end we ended up scrapping Labview all together and using the NI Measurement Studio for Visual Studio to give us all the lovely looking NI controls (waveform plot, tank, gauges, switches etc) with the flexibility of C#.
In summary, even with a couple of 24" screens, sometimes the wiring for Labview code can get too complex and becomes impossible to comment, debug, and make extensible for any future changes. I suggest taking a look at Measurement Studio for Visual Studio and using your favourite .NET language with the pretty NI controls.
My two experiences with "graphic alternative[s] to traditional text based programming" have been dreadful. I find such languages to be slow to use, hard to edit, and inexpressive. Debugging them is a nightmare. And they offer no real advantages.
To be sure, it has been quite a long time since I looked at one, but the opinions of others I've asked about them have been only luke warm, so I have never taken the time to look again. Reasons to look again are welcome and will be taken on board...
Labview can be used to author large, complex software projects. Labview is unquestionably much more fun to use than a syntax based language. I have programmed mathematically dense, dynamic simulations using labview. Newer versions of Labview include alot of exciting features, especially for utilizing multiple processors. I like Labview very much. But I don't recommend it to anyone.
Unfortunately, it's an absolute nightmare for anything other than simple acquisition and display. It may one day be sufficiently developed to be considered as a viable alternative to text based languages. However, the developers at NI have consistently opted to ignore the three fundamental problems that plague labview.
1) It is unstable and riddled with bugs. There are thousands of bugs that have been posted to the labview support forums that are yet to be fixed. Some of these are quite serious, such as memory leaks, or mathematical errors in basic functions.
2) The documentation is atrocious. More often than not, when you look for help with a labview function in the local help file you'll find a sentence that merely restates the name of the item you are trying to find some detail on. e.g. A user looks up the help file on the texture filter mode setting and the only thing written in the help file is "Texture Filter Mode- selects the mode used for texture filtering." Gee, thanks. That clears things right up, doesn't it? The problem goes much deeper in that; quite often, when you ask a technical representative from national instruments to provide critical details about labview functionality or the specific behavior of mathematical functions, they simply don't know how the functions in their own library work. This may sound like an exaggeration, but trust me, it's not.
3) While it's not impossible to keep graphical code clean and well documented, Labview is designed to make these tasks both difficult and inefficient. In order to keep your code from becoming a tangled, confusing mess, you must routinely (every few operations) employ structures like clusters, and sub-vis and giant type defined controls (which can stretch over multiple screens in a large project). These structures eat memory and destroy performance by forcing labview to make multiple copies of data in memory and perform gratuitous operations- all for the sake of keeping the graphical diagram from looking like rainbow colored spaghetti with no comments or text anywhere in sight. Programming in labview is like playing pictionary with the devil. Imagine your giant software project written as a wall sized flowchart with no words on it at all. Now imagine that all the lines cross each other a thousand times so that tracing the data flow is completely impossible. You have just envisioned the most natural and most efficient way to program in labview.
Labview is cool. Labview is getting better with each new release. If National Instruments keeps improving it, it will be great one day as a general programming language. Right now, it's an extremely bad choice as a software development platform for large or logically complex projects.
I **have been writing in LabVIEW for almost 20 years now. I develop automated test systems. I have developed, RF, Vison, high speed digital and many different flavors of mixed signal test systems. I was a "C" programmer before I switched to LabVIEW.
It's true that you can build some programs quickly in LabVIEW, but just like any other language it takes a lot of training to learn to build a large application that is clean easy to maintain with reusable code. In 20 years I have never had a LabVIEW bug stop me from finishing a project.
Back in the day, NIWEEK would have a software shootout every year. LabVIEW and LabWINDOWS (NI's version of "C") programmers would both be given the same problem and have a race to see which group finished first. Each and every year all the LabVIEW programmers were done way before the 1st LabWINDOWs person finished. I have challenged many of my dedicated text based programming friends to shootouts and they all admit they don't stand a chance, even if I let them define the software problem.
So, I feel LabVIEW is a great programming tool. It's definitely the way to go if you’re interfacing with any type of NI hardware. It's not the answer for everything but I’m sure there are many people not using it just because they don’t consider LabVIEW a “real programming language”. After all, we just wire a bunch of blocks together right? I do find it funny how many text based programmers snub there noses at it as they are so proud of the mess of text code they have created that only they can understand. A good programmer in any language should write code that others can easily read. Writing overly complex code that is impossible to follow does not make the programmer a genius. It means the programmer is a “compliator”(someone who can take a simple problem and complicate it). I believe in the KISS principle (KEEP IT SIMPLE STUPID).
Anyway, there’s my two cents worth!**
I thought LabVIEW was a dream for FPGA programming. Independent executable blocks just... work. In general, I use LabVIEW for various tasks interfacing with my DAQ and FPGA hardware, but that's about it. It seems (again to me) that this is LabVIEW's strong point and the reason it was built, but outside that arena it feels "cumbersome." As far as getting things done, it's like any other language with a learning curve - once you figure it out it's not too bad for getting work done. I've seen several people give up before that thinking the learning curve was permanent or something.
Picking up a 30" monitor made a huge difference.
I know one thing that people dislike is the version control integration.
Edit: LabVIEW/hardware is hella expensive for "just for fun" use. I dropped $10K on their hardware (student prices) and got the software for free from school for making toys around the house.
Our company is using LabVIEW for the last 10 years for measuring, monitoring and reporting of our subject (trains).
Recently we have started using LabVIEW as GUI for databases with lots of data, the powers of LabVIEW with the recent new features (Classes, XControls) allows use to create these kinds of GUIs for a fraction of development costs at other platforms. While we don't need external programmers at consultancy rate.
Ton
I first started using Labview in a college physics lab. Initially, I thought it was slow and cumbersome when compared to other text-based languages. It was too difficult to create complex logic and code became sloppy real fast (wires everywhere).
Then, a few years later, I learned about using sub-vi's and bundles. What a difference! At this point, I was using labview for very high level functions. I was taking raw input from a camera, using all kinds of image filters and processing to ultimately parse out the lines in a road so that a vehicle could drive itself down this road with no driver - it was for the DARPA URBAN CHALLENGE. I was also generating maps from text waypoint data, making high-level parsing functions, and a slew of other applications that had nothing to do with processing data from input devices. It was really a lot of fun. and FAST.
After leaving college, I am now back to using text-based languages. I've been using: PHP, Javascript, VBA, C#, VBscript, VB.net, Matlab, Epson RC+, Codeigniter, various API's, and I'm sure some others. I often get very frustrated in the amount of syntax I have to memorize in order to program with any significant speed. I find it annoying to have to switch schools of thought based on the language I am using... when all programming languages essentially do the same thing! I need a second monitor just to have the help up at all times so i can find the syntax for the same functions in different languages. I miss Labview very much, it's too bad it's so expensive otherwise I would use it for everything.
Graphical based programming I think has a huge potential. By not being constrained by syntax, you can focus on logic instead of code. Labview itself may still be in its infancy in terms of support and debugging, but I believe conceptually it beats out the competition. It's simple a more intuitive way to program.
We use LabVIEW for running our end of line test equipment and it is ideal for data acquisition and control. Typically measuring 15 to 80 differential voltages and controlling environmental chambers, mass flow controllers and various serial devices LabVIEW is more than capable.
Interfacing with custom devices can be simplified greatly by using the NI instrument driver wizard to create reusable VI's, interfacing with custom dll's if needed. On a number of projects we have created such drivers for custom hardware and once created there are reusable in future projects with no modification.
Using event driven structures user interfaces are responsive and we regularly use LabVIEW applications to interface with a database.
Whatever programming environment you choose it's the process of designing the application that matters most. I agree that you can create some really horrible and unreadable block diagrams in LabVIEW but then you can also create unreadable code in Visual studio. With just a little thought and planning a LabVIEW block diagram can be made to fit on a single 24" monitor with plenty of space to add comments.
I would use LabVIEW over Visual Studio for most projects.
But people do use LabView for purposes other than data acquisition and virtualization. Of course LabVIEW is mainly used in labs and production environments because it is (or was) one of the main NI's customer target.
However you can do a lots of various things with LabVIEW, like programming a robot that would perform a lot of image analysis, and then tweet the results. Have a look at videos from NI Week 2009 on you-tube, and you'll see how powerful this tool is. For instance, there is possibility to write code and deploy it to ARM MCUs (see this Dev Monkey article from 2009.08.10).
And finally check this LabVIEW DIY group
I have been using LabVIEW for about two years for developing automation. If given due care and proper design we sure can develop maintainable and really good looking application in LabVIEW.I think this is the same for all the other languages out there. I have seen equally bad code in LabVIEW primarily from people who use it only to develop quick and dirty working automation. IMHO Graphical programming is a lot easier to code and understand if rightly done. But that said I feel text based programming 'feels' more powerful!
LabVIEW is primarily marketed for industrial automation, has inherent support for lot of NI hardware and you can get the third party hardwares working with it pretty quickly. I think that is the reason you see it only in automation field. Moreover it is pretty costly and you are locked down with NI as you do cannot even open your code if you do not buy the software from them!
I've been thinking about this question for decades (yes, since 1989...)
Like all programming languages, LabVIEW is a high-level tool used to manipulate the flow of electrons. Unless you are a purist and refuse to use anything other than a breadboard and wires; transistors, integrated circuits and programming languages are probably a good thing if you wish to build something of any consequence.
But like all high-level tools, just wielding one does not make you a professional craftsman. Back in the day of soldering irons, op-amps and UARTs it required a large amount of careful study before you could create a system that actually functioned. The modern realm of text-based languages is so overly dominated by syntax that the programmer must get it just right before it will compile and run. In order to write code that works, the programmer must increase their skill level to create systems much larger than "Hello World".
LabVIEW is not dominated by syntax, but by Data Flow. Back in the day, reaching for your flow charting template and developing the diagram of a well-balanced information system was the art and beauty part of the job. Only after you had the reviewed flowchart in hand would you even consider slogging through the drudgery of punching out the code. (yes... punch cards)
LabVIEW is a development system that allows the programmer to use flow charting tools to diagram the complete information system and press "run"..... LabVIEW "punches out the code" and compiles it for you. No need to fight through the syntax of text language A or language B.
With such a powerful tool, novices can build large, working programs rapidly -- implying some level of professional craftsmanship since it runs at all. However, if the system does not perform elegantly, or the source code diagram is a mess, it is not the fault of LabVIEW.
People often point to "LabVIEW is only good for developing large data acquisition systems." Perhaps those people should consider the professionalism of the scientists and engineers that are working in data acquisition. If they know enough to get the actual wires right for the sensors and transducers, it may be a good bet that they are expert at developing LabVIEW wiring diagrams as well.
I do use LabView at home, as it is part of Lego Mindstorms, which my son loves. And I really like the way to compose systems like this.
However, in my work (embedded systems), it is generally to restrictive. But also here, I'm trying to move up in abstraction:
- control and state behavior: Model based design (i.e. Rhapsody)
- data algorithms etc. Simulink
Sometimes a graphical model can require more clicks than a piece of code. But this also includes the work a good programmer need to do in design & documentation; not just the code typing. The graphical notation takes many hassles away and is generally much faster if the tool is powerful enough for the complexity at hand. So I expect these kinds of tools will gain more popularity in the next years as they mature and people get familiar with them.
I have used LabView for some 10 years. It's brilliant for Scientific prorgamming ie like Matlab or Simulink but 10 times better. If you are having problems then you are doing something wrong. It takes time to learn like any language. As for using .Net instead - are these people even on the same planet? Why would you go to the trouble of writing eveything from scratch when you can say pull up an FFT etc and use alread written code. .NET is fine for simple programs but not so good for Scientific processing. yes you can do it but not without oodles of add-ons for graphics etc. Prorgamming in G is far easier than text based for Scientific problems. You can of course program in c if you are interfacing and use the dll. Now there are things that I would not use LabView for - speech recognition for example may be a bit messy at present. More to the point though, why do people like programming in outdated text form when there is an easy alternative. It is as if people want to make things complicated so as to justify their job in some way. Simplify Simplify!
Somebody said that LabView is only sued in the Automation field. Simply not write at all. It has applications in Digital Signal Processing,Control Systems,Communications, Web Based,Mathematics,Image Processing and so on. It started as a data aquisition method and they invented the name Virtual Instrumentation but it has gone far beyond that now. It is a Scientific programming language with a second to none graphical interface. It is way beyond Simulink and if you like Matlab then it has a type of Matlab scripting built in for those that like such ways of programming. It is evolving all the time. The one thing I found difficult was writing code for the Compact Rio - tricky but far easier than the alternative. It's expensive but you get a quality product. I personally have not found any bugs in ordinary programming. It is an engineers language but anybody could use it to program.
I have been trying to make work EZSIM with no luck, which is a software to build discrete event simulators in a graphical DOS environment. In this software, my simulator and many others (of the other people in the course I'm taking) don't work, but teacher's simulator (and examples of the downloaded files) does work.
So, I began to distrust of the software.
Do you know any software that resolves the same kind of problems but really works? It will be good if it is free, or I can download an evaluation copy or something like that.
If you don't know any software, do you know any library which might work? Preferably in C#, Ansi C, Java or Delphi.
This may be more than what you're looking for, but check out NS2. It's the standard for open source network simulations, and will allow you to simulate all kinds of network layer behavior.
I've also used JUNG in the past. It's very flexible, although it also doesn't offer much out of the box.
I used Möbius in my computer systems analysis class. It is free for educational use (which sounds like what you're doing). It's a Java GUI which generates C++ code.
The R package queuecomputer. queuecomputer is a computationally efficient method for simulating queues with arbitrary arrival and service times. There is a submitted paper on arXiv describing the algorithm used in the package. Examples can be found within the arXiv paper and the vignette. A web app based on the package is available at https://ace-ebert.shinyapps.io/queue_simulator_mmk/ .