I just recently started experiment with SLIME, and found a problem that makes me unsure whether it is something I am doing wrong or if the current snapshot of SLIME is broken.
The problem: trying to change the package (using , !p) always throws an error, regardless of which backend is used.
The error from SBCL looks like this:
The value #("FOO" 0 3 (SWANK-IO-PACKAGE::FACE NIL)) is not of type (OR (VECTOR CHARACTER) (VECTOR NIL) BASE-STRING SYMBOL CHARACTER PACKAGE).
[Condition of type TYPE-ERROR]
CLISP and CCL throw the same error, though worded slightly differently.
I am running on Windows, but the same thing happens when I try it on Linux. I suspect that either there is something I am neglecting to do in my .emacs file, or there is a glitch in the current version of SLIME. I just started using SLIME yesterday, so I have no past experiences to compare it to.
Any ideas?
It's working for me. What version of slime is it? You could try grabbing the latest from source and see if that helps.
Related
I've recently set up Portacle 1.3 for learning common lisp on Win 7. However, whenever I run my code I get the error, even if there is no code.
Running individual lines works fine, however. The error only shows when I run the whole file.
I tried putting some code in an EVAL function, but I believe that only accepts one argument at a time, so I couldn't run a whole program in it.
I've found a similar error in this stackoverflow page, but their code contains colons and that's where their error lies.
I think it might be an error in the code that runs mine, seeing as I get the error even if I compile with no code, however I know nothing.
The full error:
main.lisp:1:1:
read-error:
READ error during COMPILE-FILE:
illegal terminating character after a colon: #\
Line: 1, Column: 13, File-Position: 12
Stream: #<SB-INT:FORM-TRACKING-STREAM for "file [path to file]\\main.lisp" {1005F5F0D3}>
Compilation failed.
Portacle is a standalone Emacs packaged with everything needed for Common Lisp development and which uses SBCL as the Common Lisp implementation.
I believe what you do when you say 'compile the whole file' is call slime-compile-and-load-file which is bound to the key sequence C-c C-k by default. There are a lot of moving components here:
Emacs is the text editor here. It also takes care of launching all the necessary components for Common Lisp development.
Slime is one such component. It serves as interface between Emacs and your Common Lisp implementation (SBCL in this case, but supports any Lisp in theory). Basically it sends the code you wrote in Emacs to your Lisp for evaluation.
SBCL is the Common Lisp implementation. In this case it is a compiler. This is what evaluates the code it receives and spews out the answers to the user interface in Emacs, through Slime. It also 'lives', in the sense that you interact with it by modifying the state of the loaded Lisp image, keeping track of defined functions, global dynamic variables and much more. This is why you can have the REPL, and why you need Slime to interact with it.
So to debug your problem, I would try to:
Launch SBCL from the Windows shell and run a simple .lisp file to check that everything works. You can put for example (format t "~a" (lisp-implementation-type)) in a .lisp file and run it in SBCL from the shell by calling (load "...\\file.lisp"). It should return "SBCL".
Create a completely new file using Emacs (and not weird Windows programs that could mess up the files) (C-x C-f), and try to call the compile from there (C-c C-k).
And I believe you made the right choice of IDE. Portacle is arguably the simplest tool out there if you are a total beginner in Common Lisp and do not know Emacs configuration. The keybindings are a bit daunting though.
I have recently installed fedora 21 in my new system followed by emacs 24 text editor. When I try to do spell check, I am getting the following message at the bottom:
ispell-phaf: No matching entry for nil.
I understand that it has something to do with dictionaries linked with the ispell spell checking tool but unable to figure out exactly what the problem is. Please help me out friends....
Like #lawlist mentioned, the error is coming from the function ispell-parse-hunspell-affix-file. What ispell is trying to do is it's pulling in your set dictionary from ispell-dictionary or ispell-local-dictionary and then passing that value into the above function. That function then pulls the alist that is defined in ispell-local-dictionary-alist, which it then passes to hunspell.
So what you need to do in particular is to add an entry to ispell-local-dictionary-alist, something like this (example taken from here:
(setq ispell-local-dictionary-alist '(
("american"
"[[:alpha:]]"
"[^[:alpha:]]"
"[']"
t
("-d" "en_US" "-p" "D:\\hunspell\\share\\hunspell\\personal.en")
nil
iso-8859-1))
Where you need to make sure that where it says "american", you have the dictionary name that matches exactly with the value that you inputted into ispell-dictionary or ispell-local-dictionary, and make sure that you pass the arguments that you want into hunspell through this line: ("-d" "en_US" "-p" "D:\hunspell\share\hunspell\personal.en"). You can see what commands hunspell will take here. Hopefully that should at least get you a more meaningful error message so you know what else is going wrong.
I had a similar issue when migrating to a new OS as well. The migration also upgraded my emacs from 24.3 to 24.4 (and now I'm on 24.5).
I resolved this by installing the following:
rw-language-and-country-codes
rw-ispell
rw-hunspell
And then restarting emacs. I was stuck for a long time because I forgot to restart emacs - so don't forget! The wiki might also be helpful: http://www.emacswiki.org/emacs/InteractiveSpell
This worked for me finally (details in the following blog)...
http://blog.binchen.org/posts/what-s-the-best-spell-check-set-up-in-emacs.html
I chose the 'suggestion for non-programmers' in the above blog...
Thank you all for your support... #lawlist #Allan Zhang #Lucas #Rob Spanton
Even though the error has to do with a Hunspell function, this pops up when aspell can't be found by Emacs. Hunspell isn't used by default even when it's present on the system (as far as I can tell). Make sure it and some dictionaries are installed:
sudo yum install aspell aspell-en
or other dictionaries for other languages.
You might be interested in the Fedora package search:
https://apps.fedoraproject.org/packages/aspell
I had a similar issue after install Fedora 22. I resolved this by installing the hunspell-en-GB package from the Fedora repositories.
since I began using dbus with Emacs some days ago (meaning I recompiled with dbus-support), when I open a latex-file or try to switch manually to latex-mode, I get
File mode specification error: (invalid-function dbus-ignore-errors)
and emacs stops there remaining in fundamental mode.
I use dbus for Zeitgeist-Support and that works fine and up to the recompilation, Auctex worked equally fine. I checked if the dbus-functions are available with the result: They show up in the help (including "dbus-ignore-errors") but they don't seem to be available for execute-extended-commad (M-x) meaning they don't show up in completion and cannot be executed. On the other hand they are available for lisp-eval.
I don't know if that's normal behavior for these functions, but anyway there seems to be some sort of a problem with the availability of the functions for auctex?
The situation does not change by disabling the zeitgeist-plugin.
Any suggestions?
Best regards
Matthias
The error invalid-function usually means that a piece of Emacs Lisp code was compiled before a certain macro was defined, and is now trying to call that macro as a function. To solve this, find the module in question and recompile it after making sure that the macro (dbus-ignore-errors in this case) is defined.
In the case of Auctex, this happens because tex.el contains the following:
;; Require dbus at compile time to prevent errors due to `dbus-ignore-errors'
;; not being defined.
(eval-when-compile (and (featurep 'dbusbind)
(require 'dbus nil :no-error)))
That is, it tries to load the dbus library, but ignores failures. If the Emacs under which Auctex is being compiled doesn't support dbus, dbus-ignore-errors will thus be compiled into a function call when compiling tex.el. That's no problem, because the dbus-ignore-errors call is protected by a featurep test.
If this byte-compiled file is then loaded into an Emacs instance that does support dbus, we suddenly reach the line in question, and try to call the macro as a function, which fails with invalid-function. That's why the file needs to be recompiled before being loaded into a dbus-enabled Emacs.
One way to solve this is to wrap the dbus-ignore-errors line into eval, changing this line:
(dbus-ignore-errors (dbus-get-unique-name :session))
to this:
(eval '(dbus-ignore-errors (dbus-get-unique-name :session)))
That would postpone the decision on how to evaluate that expression until runtime, when Emacs will know that dbus-ignore-errors is a macro.
I've been seeing this a lot lately and am not sure if it is an SBCL issue, an Emacs problem, a SLIME problem, or my own understanding of what it means to "compile" a lisp file.
I will have a function, say this:
(defun some-function (x) (call-this-funcshun))
I will compile and run this, and I'll get an error that my function call-this-funcshun is not defined. Then I realize that is because there is a typo. So change it:
(defun some-function (x) (call-this-function))
In Emacs, I recompile the entire file with Control-C Control-K (Emacs saves automatically before the compile as well). Emacs then reports Compilation finished. I move to the REPL. I try it again, type (some-function whatever) and I get the same error. I search through the small lisp file and see that call-this-funcshun is clearly nowhere in it. Yet I have an error that this function is not defined.
Is there some sort of caching that Emacs or SBCL is doing that causes this to hang around? It's driving me nuts. Worth noting that if I quit SLIME and then launch it again, the issue is resolved. Also worth noting that this does not affect all my code edits, just occasionally.
Maybe the file is not loaded for some reason.
I would set *load-verbose* to T and watch that LOAD actually gets called.
Setting *load-print* to T would then also cause the printing of information about definitions loaded.
I've seen two conditions that can lead to behavior that looks like what you saw:
When the symbol in the file is not the same as the symbol at the REPL. The symbol's name is only a shorthand for identifying the symbol, and the same shorthand can identify different symbols based on which package you use it in. There are some ways to be surprised about which symbol you are referring to, so it can be worth checking with SYMBOL-PACKAGE even when you are pretty sure that they are the same.
When the buffer isn't saved. I'm not sure how C-c C-k deals with this now (because I edited it to auto-save for me), but in general compiling and loading tools tend to work from the file not the buffer.
I'm currently in the process of adding functionality to an existing J2EE webapp, in a Tomcat container, and I'm writing my additions using Clojure. My setup is simple: I just add calls to static methods generated by clojure, and code all the hard work from the clojure side. The build process consists in compiling clojure code (lein uberjar) and then compiling the java code with that jar on the classpath.
In the webapp init, I have a call to a generated class that fires up a swank server with a (swank/start-repl). I'd like to be able to connect my Aquamacs' slime to that server, and work interactively from there (up to a point, I won't try nothing that requires a java-side recompilation). But I have a situation that I don't quite understand. If I do a \M-x slime-connect, I get a REPL prompt (after being notified that there's no inferior lisp process, which I think it's ok, since the inferior lisp process is running outside emacs control). I can evaluate forms perfectly, and I can even inspect things like my.own.namespace/my-var. However, if I visit a file with an already compiled clojure code, I can't seem to make slime recognize it as its source. Consider a simple clojure file:
(ns my.namespace
(:gen-class
:name my.namespace
:methods [#^{:static true} [testFunc [] void]]))
(def *secret* "shhhh")
(defn -testFunc []
(println (str "our secret is: " secret)))
Assuming that this was compiled and included in the uberjar loaded by the webapp, I can eval/inspect my.namespace/*secret*. But If I try to eval inside the code buffer, Slime thinks I'm on the user namespace (which can even make sense!). But now I'm left with a single working option - I have to evaluate - one by one, all the forms in the file! \C-c \C-l (loading the source file) won't do nothing - apparently just returns nil and outputs nothing else. Compiling everything seems to do just that - it compiles, shows errors if it finds them, but won't change my namespace. And the strangest is the \C-~ (sync package and directory), which using Common Lisp it does just what I want, but here it freezes the clojure REPL for good.
There's always the option of switching to the REPL, typing (in-ns 'my.namespace), and then all works properly. But that simply isn't practical enough when the clojure files are growing in number (as the namespace of the code buffer won't change automatically!)
My question is, then, whether I'm lacking a basic command/configuration - or if there's an obvious reason for this behavior to happen as such.
I may be misunderstanding your problem, but can't you (while visiting this hypothetical buffer in emacs), hit C-c C-k to compile the buffer in your current Clojure instance (what Slime is connected to)?
Then, in the Slime buffer, switch to this namespace with a (in-ns 'my.namespace). Then you should have access to what you compiled in that namespace.
Switching namespaces automatically on compile has never been the default for swank-clojure, though it might be an optional slime feature that happened to work with Clojure. But C-c M-p to switch the repl to the current buffer's namespace has always worked for me, and I've never heard of anyone having trouble with it.
Are you running on the latest stable versions of clojure-mode and slime-repl? Do you have swank-clojure.el installed? (You shouldn't need it.) It sounds like this could be due to mismatched versions of the elisp libs. If that's not the problem it could be an Aquamacs bug; swank-clojure is designed to work with GNU Emacs. It could also be a bug in slime if you are running from trunk rather than the latest elpa release.
I've just found out that removing the culprit for this issue: slime-redirect-inferior-output, from slime-repl.el, was being called from a hook I had setup. It turns out that it doesn't play well without an inferior-lisp-process (read, a swank server started from within emacs).
So a quick workaround hack is just to remove the error form from that function, like this. Now the hook proceeds, and the namespaces are automatically calculated. As intended. Thank you for the suggestions, nevertheless - they led me to this solution!