I'm programatically adding two custom UIPickerViews to another view (MainView). They work just fine but they are not visible until a touch event occurs in any part of the MainView. I've checked the class references for UIPickerView and UIView but haven't found anything that manages to "refresh" the view, unless I'm missing something obvious?
Here's my drawRect method in MainView.m. I've tried doing the same thing in viewDidLoad but with no success. Could the custom rotations/transforms etc have something to do with it?
- (void)drawRect:(CGRect)rect {
CGRect pickerFrame = CGRectMake(50, -32, 30, 180);
m_picker1 = [[UIPickerView alloc] initWithFrame:pickerFrame];
m_picker1.delegate = self;
m_picker1.tag = k_ptag1;
m_picker1.showsSelectionIndicator =YES;
m_picker1.backgroundColor = [UIColor clearColor];
CGAffineTransform rotate = CGAffineTransformMakeRotation(3.14/2);
rotate = CGAffineTransformScale(rotate, 0.075, 0.85);
[m_picker1 setTransform:rotate];
[self addSubview:m_picker1];
pickerFrame = CGRectMake(50, 67, 30, 180);
m_picker2 = [[UIPickerView alloc] initWithFrame:pickerFrame];
m_picker2.delegate = self;
m_picker2.tag = k_ptag2;
m_picker2.showsSelectionIndicator =YES;
m_picker2.backgroundColor = [UIColor clearColor];
rotate = CGAffineTransformMakeRotation(3.14/2);
rotate = CGAffineTransformScale(rotate, 0.075, 0.85);
[m_picker2 setTransform:rotate];
[self addSubview:m_picker2];
}
You add subviews in a view's controller, not the view itself. I would suggest familiarising yourself with the MVC design pattern.
drawRect is only supposed to be used for the actual drawing of the view itself, not subviews.
Related
I have a View Controller that creates its view programatically through the loadView method. The purpose of the view is to display a data models contents. When the view loads it is aligned correctly under the status and navigation bar.
But at a later point I present another view modally to allow the user to select a different data model to populate the view. This causes the the loadView to get called again and re-create the required UI for the new data model. The problem is that the view's contents now appear under the status and navigation bars!
Please note that I am not using auto-layout due to having to support iOS4 :( Also if I include the extendedLayout fix - it does fix the problem but only after the modal's dismiss animation completes leaving a jump down effect. My code below, thanks for any help.
- (void)loadView {
CGRect frame = CGRectMake(0, 0, [Constants ScreenWidth], [Constants ScreenHeight] - StatusBarHeight - ToolbarHeight);
self.view = [[UIView alloc] initWithFrame:frame];
self.view.autoresizingMask = UIViewAutoresizingFlexibleHeight;
self.view.autoresizesSubviews = YES;
self.view.backgroundColor = [Constants categoriesScreenBackgroundColor];
CGRect scrollFrame = CGRectMake(0, 0, [Constants ScreenWidth], [Constants ScreenHeight] - StatusBarHeight - ToolbarHeight - ToolbarHeight);
UIScrollView *scrollView = [[UIScrollView alloc] initWithFrame:scrollFrame];
scrollView.autoresizingMask = UIViewAutoresizingFlexibleHeight |
UIViewAutoresizingFlexibleBottomMargin |
UIViewAutoresizingFlexibleTopMargin;
[self.view addSubview:scrollView];
_toolbarViewController = [self createToolbarViewController];
[self.view addSubview:_toolbarViewController.view];
_toolbarViewController.productInfoWorkflowState = _productInfoWorkflowState;
UIView *containerView = [[UIView alloc] initWithFrame:scrollView.frame];
containerView.backgroundColor = [UIColor clearColor];
_headerViewController = [self createHeaderViewController];
[containerView addSubview:_headerViewController.view];
_menuViewController = [[ProductInfoMenuViewController alloc] initWithBatch:[self batchData]];
_menuViewController.delegate = self;
[containerView addSubview:_menuViewController.view];
CGRect categoriesFrame = _menuViewController.view.frame;
categoriesFrame.origin.y = _headerViewController.view.frame.size.height;
_menuViewController.view.frame = categoriesFrame;
CGRect viewFrame = containerView.frame;
viewFrame.size.height = _headerViewController.view.frame.size.height + _menuViewController.view.frame.size.height;
containerView.frame = viewFrame;
[scrollView addSubview:containerView];
scrollView.contentSize = containerView.frame.size;
_starViewController = [[StarViewController alloc] initForProduct:_productData With:[StarredItems new]];
self.navigationItem.rightBarButtonItem = [[UIBarButtonItem alloc] initWithCustomView:_starViewController.view];
}
Screen layout after first load:
Screen layout after second load:
With Leo's suggested fix, the scrollView is correct BUT the toolbar at the bottom now appears incorrectly. Code I used (placed after the toolbar creation code above):
if (SYSTEM_VERSION_GREATER_THAN_OR_EQUAL_TO(#"7.0")) {
self.automaticallyAdjustsScrollViewInsets = NO;
scrollView.scrollIndicatorInsets = UIEdgeInsetsMake(64.0f, 0.0f, 0.0f, 0.0f);
scrollView.contentInset = UIEdgeInsetsMake(64.0f, 0.0f, 0.0f, 0.0f);
}
Results:
Add following code its work for me for same issue, may be its help you
/* ios 7 Change */
if ([[[UIDevice currentDevice] systemVersion] floatValue] >= 7)
{
self.edgesForExtendedLayout = UIRectEdgeNone;
self.automaticallyAdjustsScrollViewInsets = NO;
}
Does this only happen on iOS 7?
Give this a try:
self.navigationController.navigationBar.translucent = NO;
Try following:
Toolbar.autoresizingMask = UIViewAutoresizingFlexibleTopMargin;
try this
CGRect frame = CGRectMake(0, StatusBarHeight, [Constants ScreenWidth], [Constants ScreenHeight] - StatusBarHeight - ToolbarHeight);
self.view = [[UIView alloc] initWithFrame:frame];
self.view.autoresizingMask = UIViewAutoresizingFlexibleHeight;
self.view.autoresizesSubviews = YES;
self.view.backgroundColor = [Constants categoriesScreenBackgroundColor];
CGRect scrollFrame = CGRectMake(0, StatusBarHeight, [Constants ScreenWidth], [Constants ScreenHeight] - StatusBarHeight - ToolbarHeight - ToolbarHeight);
UIScrollView *scrollView = [[UIScrollView alloc] initWithFrame:scrollFrame];
scrollView.autoresizingMask = UIViewAutoresizingFlexibleHeight |
UIViewAutoresizingFlexibleBottomMargin |
UIViewAutoresizingFlexibleTopMargin;
[self.view addSubview:scrollView];
I think the problem is due to incorrect automatic set of content insets of the scrollview.
Try the following. In your loadView, set self.automaticallyAdjustsScrollViewInsets to NO (only if NSFoundationVersionNumber > NSFoundationVersionNumber_iOS_6_1). Now, set the contentInset and scrollIndicatorInsets to the correct values depending on OS version:
scrollview.contentInset = scrollview.scrollIndicatorInsets = UIEdgeInsetMake(NSFoundationVersionNumber <= NSFoundationVersionNumber_iOS_6_1 ? 0 : 64, 0, 0, 0);
My problem was solved unmarking the check "Adjust Scroll View Insets" in the View Controller (using Storyboards).
I am new to iOS programming. Please help me to sort out the following issue
I have one set of view controller(.h, .m and .XIB)
I have one set of view(.h&.m)
3.The view class is responsible for drawing gauge using
-->drawRect
-->CALayer and sublayers
In this view I have initialize method, and this method only i set the bounds for my layers and sublayers
here i am pasting some sort of code..
- (void)initialize {
CGFloat span = fmin(self.frame.size.width, self.frame.size.height);
frameLayerObject_ = [[OuterFrameLayer alloc] init];
frameLayer = [[CALayer layer] retain];
frameLayer.bounds = CGRectMake(250, 50, 710, 320);
frameLayer.position = self.frame.origin;
frameLayer.needsDisplayOnBoundsChange = YES;
frameLayer.delegate = self.frameLayerObject;
[self.layer addSublayer:frameLayer];
[frameLayer setNeedsDisplay];
self.minValue = 0.0;
self.maxValue = 100.0;
self.tickStartAngle = M_PI;
self.tickArcLength = M_PI
self.lineWidth = span / 200.0;
self.tickLength = span / 12.0;
self.minorTickLength = span / 16.0;
self.tickInset = self.lineWidth;
textLabel_ = [[UILabel alloc] initWithFrame:CGRectMake(0, 3.0 * self.frame.size.height / 10.0, self.frame.size.width, self.frame.size.height / 10.0)];
self.textLabel.textColor = [UIColor whiteColor];
self.textLabel.backgroundColor = [UIColor clearColor];
self.textLabel.font = [UIFont systemFontOfSize:span / 17.77];
[self addSubview:self.textLabel];
needleLayerObject_ = [[gaugeNeedle alloc] init];
self.needleLayerObject.tintColor = [UIColor whiteColor];
needleLayer = [[CALayer layer] retain];
needleLayer.bounds = self.bounds;
needleLayer.position =CGPointMake(((self.bounds.size.width / 2.0)), ((self.bounds.size.height / 2.0)));
needleLayer.needsDisplayOnBoundsChange = YES;
needleLayer.delegate = self.needleLayerObject;
[self.layer addSublayer:needleLayer];
[needleLayer setNeedsDisplay];
}
In my view controller, I have created 5 views in my xib and .h and i am assigning the same view class for all the 5 views.
Now the problem is, all 5 views differ in their position and bounds. But my drawRect view class has only one set of bounds for all views. So if I hardcode the bounds and position in initialize method with respect to one view, the remaining 4 views are getting affected. Please let me know if u know where i am going wrong.
Thanks in advance..
each of your five views should be executing the draw code relative to their own coordinate space, and there would be no problem. Use self.bounds as the rectangle in your drawing code and the five should all draw identically in their own space. Don't use self.frame, this is in the parent view's coordinate space, and introduces the problem you are experiencing.
You may also want to experiment with the clipsToBounds property, when this is set to YES a UIView can't draw beyond its own borders.
I want to set the frame of iCarousel according to my need. First it shows in the middle of the simulator but i tried my code now it is showing at the top of the simulator.
I am trying this code:
// Try to add custom view for setting height and width of iCarousel
UIView *Carasouel_Customview = [[UIView alloc]initWithFrame:CGRectMake(10, -245, 768, 245)];
[self.view addSubview:Carasouel_Customview];
// Initialize and configure the carousel
//carousel = [[iCarousel alloc] initWithFrame:self.view.bounds];
carousel = [[iCarousel alloc] initWithFrame:Carasouel_Customview.bounds];
//carousel = [[iCarousel alloc] initWithFrame:CGRectMake(20, 200, 179, 245)];
carousel.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight;
carousel.type = iCarouselTypeRotary;
carousel.dataSource = self;
carousel.delegate = self;
[self.view addSubview:carousel];
Any hints from experts would be very welcome.
self.carousel = [[iCarousel alloc]initWithFrame:CGRectMake(0.0, 0.0, 200.0, 150.0)];
self.carousel.delegate = self;
self.carousel.dataSource = self;
self.carousel.type = iCarouselTypeLinear;
self.carousel.clipsToBounds = YES; //This is main point
[self.view addSubview:self.carousel];
When we set customFrame to iCarousel we get its width of fullScreen. So just set its clipsToBounds property YES :)
You're setting y-coordinate -245 to Carasouel_Customview and then setting carousel.frame with Carasouel_Customview.bounds - here y-coordinate is 0.
You are adding carousel to self.view, not Carasouel_Customview - so what do you expect?
Solution:
Add carousel as subview to Carasouel_Customview or set carousel.frame with custom values.
In my app i am creating view controller with mixed of UILabel and UITextview which want to be scrollable because the text are dynamic and also exceeds vertical screen size.
I am currently having Scrollview which has subviews as below. Views are created in Xcode 4.3 Storyboard.
UILabel1(Say Heading)
UITextView1(Dynamic text which can be any size)
UILabel2(Second Heading)
UITextView2(Dynamic text which can be any size)
and so on.
The problem is
When the UITextView1 has more content then it overlaps with UILabel2 which i don't want.
I would like to have UILabel1 on top of scrollView and UITextView1 below the UILabel1. UILabel2 below UITextView1 and so on.
What i have to do to achieve this?
EDIT
In Storyboard
![enter image description here][1]
In Simulator
![enter image description here][2]
Thanks for your help guys. Much appreciated.
Code
- (void)viewDidLoad
{
[super viewDidLoad];
// Do any additional setup after loading the view.
[scrollView setScrollEnabled:YES];
[self.view addSubview:cockTailNameLabel];
[self.view insertSubview:txtIngredients belowSubview:cockTailNameLabel];
[self.view insertSubview:scrollView belowSubview:cockTailNameLabel];
//[scrollView]
[self.cockTailNameLabel setText:self.passcockTailName];
[_txtUse setText:self.passUse];
[_txtUse setEditable:NO];
[_txtUse setUserInteractionEnabled:NO];
CGRect useFrame = _txtUse.frame;
useFrame.size.height = _txtUse.contentSize.height;
_txtUse.frame = useFrame;
[txtIngredients setText:self.passIngredients];
[txtIngredients setEditable:NO];
[txtIngredients setUserInteractionEnabled:NO];
CGRect ingredientFrame = txtIngredients.frame;
ingredientFrame.size.height = txtIngredients.contentSize.height;
txtIngredients.frame = ingredientFrame;
[txtRecipe setText:self.passReceipe];
[txtRecipe setEditable:NO];
[txtRecipe setUserInteractionEnabled:NO];
CGRect recipeFrame = txtIngredients.frame;
recipeFrame.size.height = txtRecipe.contentSize.height;
txtRecipe.frame = recipeFrame;
[scrollView insertSubview:_txtUse belowSubview:cockTailNameLabel];
[scrollView insertSubview:titleIngredients belowSubview:_txtUse];
[scrollView insertSubview:txtIngredients belowSubview:titleIngredients];
[scrollView insertSubview:btnReceipe belowSubview:txtIngredients];
[scrollView insertSubview:btnHome belowSubview:txtIngredients];
[scrollView insertSubview:txtRecipe belowSubview:btnHome];
[scrollView insertSubview:btnfacebookShare belowSubview:txtRecipe];
[scrollView insertSubview:btnTwitterShare belowSubview:txtRecipe];
/*[scrollView addSubview:_txtUse];
[scrollView addSubview:titleIngredients];
[scrollView addSubview:txtIngredients];
[scrollView addSubview:btnReceipe];
[scrollView addSubview:btnHome];
[scrollView addSubview:txtRecipe];
[scrollView addSubview:btnfacebookShare];
[scrollView addSubview:btnTwitterShare];*/
[scrollView setContentSize:CGSizeMake(320, 1000)];
NSLog(#"RecipeName :%# ",passcockTailName);
}
In Storyboard or IB you can rearrange them freely.
In code you do - (void)insertSubview:(UIView *)view belowSubview:(UIView *)siblingSubview.
In code (in viewDidLoad):
UIScrollView *scroll =[[UIScrollView alloc] initWithFrame:CGrectMake(0,0 320, 480)];
[self.view addSubview:scroll];
// code to init your UI object
UILabel *uilabel1 = [[UIlabel alloc] initWithFrame:CGrectMake(10,10, 100, 40)]; // example
uilabel1.font = [UIFont systemFontOfSize:10];
uilabel1.text = #"UILabel1";
uilabel1.backgroundColor = [UIColor clearColor];
//
//
UILabel *uilabel2 = [[UIlabel alloc] initWithFrame:CGrectMake(10, 10 + 10 + uilabel1.frame.origin.y, 100, 40)]; // example
uilabel2.font = [UIFont systemFontOfSize:10];
uilabel2.text = #"UILabel2";
uilabel2.backgroundColor = [UIColor clearColor];
//
//
[scroll addSubview:uilabel1];
[uilabel1 releale];
[scroll addSubview:uilabel2];
[uilabel2 releale];
//
//
// in end
float offset = 10.0 * 2; // offset between uiobjects, N - number of objects
scroll.contentSize = CGSizeMake (0, 0, uilabel1.frame.size.height + uilabel2.frame.size.height + offset, 320);
Note that you may set frame (and other properties) of yours uiobjects and adds it in order to descend.
You can tell next view to start from the end of the first view like so:
startYOfNextView = firstView.frame.origin.y position + firstView.frame.size.height;
Do the same for the rest of the other view. If your view has variable text length, you may need to precaculate the height of the string based on a specific font e.g.:
CGSize maxSize = CGSizeMake(widthOfView, 9999999);
CGSize expectedSize = CGSizeMake(stringVar sizeWithFont:[UIFont fontWithName:#"Arial"] withMaxSize:maxSize lineBreakMode:UILineBreakModeWordWrap);
then tell your dynamic view to use the height of expectedSize variable like so:
myDynamicView = [[UILabel alloc] initWithFrame:CGRectMake(..., expectedSize.height)];
Your issue is labels are coming on top of the textview (Overlapped), right?
In This case, you are modifying the height of the textview dynamically. If its just for display purpose you can set the text to a UILabel with numberOfLines = 0 instead of UITextview; As its added to scrollview adding a label will be fine.
Also you need to modify the origin.y of the remaining views so that it will be properly aligned. ie, secondView.origin.y = firstView.origin.y + firstView.size.height + offset. Likewise modify the origin of the remaining views wrt the just above view. So that its origin will lie outside the previous view frame.
In my case I had to project it over the parent view, so remember there is also something,
- (void)insertSubview:(UIView *)view aboveSubview:(UIView *)siblingSubview
I think adding a transparent UI button is the fastest solution. You could add it once and then show / hide whenever you need to disable all views below the current one (assuming the "current" view, say a popup, was added last to your superview).
Declare an instance variable UIButton* _parentDisablingOverlay; in your popup view, then add this in its init or layoutSubviews method:
_parentDisablingOverlay = [[UIButton alloc] initWithFrame:CGRectMake(0,0, self.superview.frame.size.width, self.superview.frame.size.height)];
[self.superview insertSubview:_parentDisablingOverlay belowSubview:self];
_parentDisablingOverlay.hidden = true;
Later on, when you want to show the popup and disable everything below:
- (void) open {
self.hidden = false;
_parentDisablingOverlay.hidden = false;
}
Similarly to close and re-enable everything:
- (void) close {
self.hidden = true;
_parentDisablingOverlay.hidden = true;
}
I would like to display an image (width: 320 pixels, height: 1250 pixels) in an image view.
When I compile the application I get no scrolling at all. The view stays fixed.
What I did:
Added an UIScrollView via Interface Builder to my view.
Added an UIImageView via Interface Builder to my view.
Verified that UIImageView is below UIScrollView in Interface Builder.
Set the size of the UIScrollView with ViewDidLoad.
How do I do this?
Code:
- (void)viewDidLoad
{
[super viewDidLoad];
scrollView.contentSize = CGSizeMake(320, 1250);
}
Screenshots:
ImageView:
ScrollView:
I just have done the same task..
Try this one.....
scrollView.delegate = self;
scrollView.scrollEnabled = YES;
int scrollWidth = 120;
scrollView.contentSize = CGSizeMake(scrollWidth,80);
int xOffset = 0;
imageView.image = [UIImage imageNamed:[imagesName objectAtIndex:0]];
for(int index=0; index < [imagesName count]; index++)
{
UIImageView *img = [[UIImageView alloc] init];
img.bounds = CGRectMake(10, 10, 50, 50);
img.frame = CGRectMake(5+xOffset, 0, 50, 50);
NSLog(#"image: %#",[imagesName objectAtIndex:index]);
img.image = [UIImage imageNamed:[imagesName objectAtIndex:index]];
[images insertObject:img atIndex:index];
scrollView.contentSize = CGSizeMake(scrollWidth+xOffset,110);
[scrollView addSubview:[images objectAtIndex:index]];
xOffset += 70;
}
Also set this one....
imagesName = [[NSArray alloc]initWithObjects:#"image1.jpg",#"image2.jpg",#"image3.jpg",#"image4.jpg",#"image5.jpg",#"image6.png",#"image7.png",#"image9.png",nil];
images = [[NSMutableArray alloc]init];
So for me the problem was that setting the content size didn't work in viewDidLoad(). I tried everything and I didn't understand why it wouldn't want to work, and then I tried the same stuff in viewDidAppear() and it magically worked...
From you last screenshot and from your comments it looks like your scrollView is way to big.
The scrollview must be visible on screen completely. For example a full screen UIScrollView on iPhone would have a size of 320 x 460.
If the scrollview is the same size as its content you can't scroll.
The greenish rectangle shows the size of your scrollview, the pinkish the size of your content (your image):
Xcode 11+, Swift 5
You can find the complete solution here.
I came across this same issue on iOS6 and the solution was to programmatically adjust the ContentSize.
So I will just quote from Raja (above) to show this:
CGSize scrollViewContentSize = CGSizeMake(320, 400);
[self.scrollView setContentSize:scrollViewContentSize];
NOTE: I was not having this issue on iOS5.. seems like iOS6 decided to do alot of prank just like the rotation/orientation saga
Since Xcode 5 it does not work like before. Also scrolling to the end of a scrollable text field makes problems. There are also differences between doing it on iPhone or iPad. On iPhone it worked without delayed timer.
This worked for me:
- (void)viewDidLoad
{
[super viewDidLoad];
NSTimer *timerforScrollView;
timerforScrollView =[NSTimer scheduledTimerWithTimeInterval:0.1
target:self selector:#selector(forScrollView)userInfo:nil repeats:NO];
}
- (void) forScrollView {
[scrollviewPad setScrollEnabled:YES];
[scrollviewPad setContentSize:CGSizeMake(768, 1015)]; // must be greater then the size in Storyboard
}
I found I had a similar problem but none of the above code worked. The issue was due to autolayout. I found that if I turned off autolayout by going to the storyboard clicking on Utilities -> File Inspector and unchecked Use Autolayout the scrolling did work (I also set scroll.contentSize = ...).
Sometimes autoLayout checkbox is ticked in the xib. That also creates this issue in xcode 5. Which makes the UIScrollView scrolling off.
Don't forget to add the category protocol to the interface, like this
#interface MyViewController : <UIScrollViewDelegate>
If you don't, you will not be able to set the scroll view delegate to self
(i.e. [MyScrollView setDelegate:self];)
If you do this, it should work.
My code is:
-(void)viewDidAppear:(BOOL)animated {
[super viewDidAppear:animated];
[contentScrollView setDelegate:self];
[contentScrollView setScrollEnabled:YES];
contentScrollView.contentSize = CGSizeMake(310, 500);
contentScrollView.frame = CGRectMake(5, 188, 310, 193);
}
Did you assign the scroll's view delegate? Always remember these:
[self.scrollView setDelegate:self];
[self.scrollView setScrollEnabled:YES];
The image view has to be a subview (so inside AND below) of the scrollview. From your description it seems they are paralell
You forgot one line. Add this to your view load function:
[scrollView setScrollEnabled:YES];
You could try disabling AutoLayout. In XCode 5 I tested all the above answers and I could only scroll it by disabling autolayout and activating all autosizing masks under the Size Inspector. The following code was used too:
self.scrollView.contentSize = CGSizeMake(320, 900);
self.scrollView.delegate = self;
self.scrollView.scrollEnabled = YES;
self.scrollView.frame = self.view.frame;
CGRect scrollViewFrame = CGRectMake(0, 0, 320, 400);
self.scrollView = [[UIScrollView alloc] initWithFrame:scrollViewFrame];
[self.view addSubview:self.scrollView];
CGSize scrollViewContentSize = CGSizeMake(320, 400);
[self.scrollView setContentSize:scrollViewContentSize];
scrollView.delegate = self;
[self.scrollView setBackgroundColor:[UIColor blackColor]];
[scrollView setCanCancelContentTouches:NO];
scrollView.indicatorStyle = UIScrollViewIndicatorStyleWhite;
scrollView.clipsToBounds = YES;
scrollView.scrollEnabled = YES;
scrollView.pagingEnabled = YES;
NSUInteger nimages = 0;
CGFloat cx = 0;
for (; ; nimages++) {
NSString *imageName = [NSString stringWithFormat:#"image%d.jpg", (nimages + 1)];
UIImage *image = [UIImage imageNamed:imageName];
if (image == nil) {
break;
}
UIImageView *imageView = [[UIImageView alloc] initWithImage:image];
CGRect rect = imageView.frame;
rect.size.height = image.size.height;
rect.size.width = image.size.width;
rect.origin.x = ((scrollView.frame.size.width - image.size.width) / 2) + cx;
rect.origin.y = ((scrollView.frame.size.height - image.size.height) / 2);
imageView.frame = rect;
[scrollView addSubview:imageView];
[imageView release];
cx += scrollView.frame.size.width;
}
[scrollView setContentSize:CGSizeMake(cx, [scrollView bounds].size.height)];
Assuming that scrollView is a subview of view and fills it entirely you can use the following in viewDidLoad:
[scrollView setContentSize: CGSizeMake(self.view.frame.size.width, self.view.frame.size.height)];
I had a UIScrollView that was not scrolling and this allowed it to scroll.
Just add code
scrollView.contentSize = CGSizeMake(WIDTH,HEIGHT);
to method -(void)viewDidLayoutSubviews.
For more information checkout Stanford CS193p Lecture No 8 to understand View Controller Life cycle.
I had the same issue and was looking for the answer in this thread. I tried all the stuff, but nothing works. Then I found this:
.
You just need to deselect "Use Auto Layout" in File Inspector of your ViewController. Ta-Da, it works immediately for me. Enjoy.