There are times when I have a decent number of source files open at once. Is there a way to change the number of rows of tabs that are visible while working in NetBeans?
Also, I have a dual monitor setup here. I could span NetBeans across the two monitors if it were possible to have multiple NetBeans editor windows open at the same time. This is something that I use in the VS Express editions. I tend to group my source files on one monitor and the designer windows in the other. Can I do this in NetBeans?
for versions 8.0.2+:
Tools -> Options -> Appearance -> Document Tabs -> Multi-row tabs
You can also maximum row count if you wish (the default is 3).
There are 2 way's I have done this:
Drag a tab from the editor panel to the side of the editor window until the red outline shows a rectangle running from top to bottom. Drop the tab there and you get another editor pane. Opening from Project or Files will still use the original panel, but you can drag tabs between the panels.
Right click on a tab and choose "Undock Window". This will create a top-level window independent of the main NB window.
When you create files with keyboard shortcuts (eg, Ctrl-N for new file) they will open in the current panel. Likewise, navigating to other files (eg, Ctrl-Shift-B for go to source).
It's not perfect though. Some keyboard actions will dump you back to the main window, then it's Alt-Tab or fiddle with the mouse to get back.
You can control the number of rows of Tabs in Netbeans by going to (on Windows):
Tools>Options>Miscellaneous>Windows> check the multi-row tabs checkbox.
See the maximum row count with the radio button and set your number.
Related
Like in the topic - is there any default way or any plugin that lets you have multiple 'Compare' windows open and active at the same time? I find it very frustrating that while doing changes to few files at the same time, I can't have active 'Compare' window for each of them, to see my changes/original code.
I would use Window -> New Window, rerun Team -> Show History and then compare another file.
A compare window in Eclipse is placed inside a normal editor tab.
You can have several editor tabs, including compare windows, visible at the same time. To do this just drag the editor tab (the one on the top with the editor name) to somewhere inside the editor area. The editor area will get split in two, each one displaying one editor.
This works with more than two editors also.
If you find that you need more space for the compare windows because other views take up much space you can maximize the editor area by pressing Ctrl+M while the editor area has focus.
Example:
Go to preferences -> team -> General Team Preferences. For me, the "Reuse open compare editors when opening comparisons" was already checked by default. I unchecked that and now I can have multiple file comparison windows open! (I'm using Eclipse Oxygen.3a -- 4.7.3a)
When I open, say a 10 or more file in Netbans 7.3.1 (windows 7), Netbeans puts each opened file's name in a a tab and all tabs are listed horizontally above the code eduitor. And at the end of that horizontal list, Netbeans provides clickable arrows (>,<,V ) to kind of navigate that list.
Since many times, the file that I want to get into is not visible in that horizontal tab list, and I need to navigate to the left or right, I usually end up clicking on the down arrow (v) and that gives me the full list of all the open files. At that time, it's a simple click to go to that file. I wish that list was available to me in a vertical fashion without an extra step.
Is there a way to see that vertical list at all times? For example, where the HTML navigator is...
I don't believe NetBeans can do this as you describe.
However, what you may find useful is Ctrl-Tab - pressing this once brings up the open file list and pressing Tab repeatedly iterates through these files. Ctrl-Shift-Tab iterates in the other direction. Letting go of Ctrl selects the currently selected file. This is similar to the Alt-Tab feature in Windows.
Hope this is useful.
Is there any way to setup an Eclipse keyboard shortcut which will split the current editor vertically and put the current tab on one side? For example, turning this:
before http://img.skitch.com/20100118-1n5xeuywunri6b91nfjpgdxxne.png
Into:
after http://img.skitch.com/20100118-t2c7g3nctx3w8bth4hq1rpqp9k.png
Not directly with eclipse (3.4 or 3.5)
The closest plugin I have found which might enable what you are looking for is the Split file Editor
Ctrl+6
Usage: Open a file in Eclipse, then select Window -> New Split Editor from the main menu to open a split editor of the file.
(not exactly what you want but:)
Split editor opens in a new tab as opposed to appearing within the existing tab
(so while there may be 2 instances of the same file editor, you still have a situation with one file on one side, and the other files on the other tab group)
I can't find a good way of putting Eclipse windows on two monitors. Currently I just detached (clicked on a header and dragged) a few windows to a secondary monitor (package explorer, console, and outline) while leaving primary monitor with maximized source editing window.
It works pretty well except few annoying issues. Detached windows are not in focus while you are editing your code. Which means that, for example, last build shortcut (Alt-Shift-X, Q) doesn't work because it can't find build file (because package explorer is not in focus). Also "Selected resources" option in a file search menu is not picking up current package selection.
So I was wondering is detaching windows a right way to go? Do you have any better solutions so at least package explorer stays in focus?
Thanks.
PS. Btw "unable to find build" error started showing up only in 3.4 ver for some reason.
In the Eclipse Helios (currently 3.6.2) I found very useful the use of another window to bring up multiple documents in different screens.
in the main menu, go:
Window > New window,
and drag it to the screen you prefer. Double click in the filename on the editor and will maximize the editor's window.
I hope i helped.
Kyr.
PS: If you want to maintain both windows when you closing Eclipse, don't close them one by one. Instead go: File > Exit.
I use Ultramon to spread my Eclipse across two monitors.
I have the left hand side devoted to the code and the right hand side to the Project Explorer, Search, Console, Ant and Outline views.
This way I get focus to all of my Eclipse stuff when I click on it in the taskbar or alt-tab. I can also overlay another window (usually my browser or a trace viewer) on the right hand monitor. I use SemTop to pin the overlayed window if I want to code and read some reference at the same time (This is where shortcuts keys come in handy).
So I can look at code and StackOverflow at the same time ;)
Ultramon
I split the eclipse environment over two monitors (both running at 1600*1200)
on the left I have the main coding window maximised with the outline down the right hand side.
On the second monitor I have the Junit window, Problems, Console and the package explorer
I have the same layout duplicated for all the perspectives that I use.
I have never used the Alt-Shift-Q short cut but I have found the Alt-Shift-X, T shortcut for running junit works fine when I am focussed in the main coding window .
Possibly have the package explorer on the same monitor as the coding window?
I have a widescreen primary monitor and a non-widescreen secondary monitor. The layout on my primary monitor is broken into three columns: column 1 contains the package explorer in the top half and the outline, hierarchy and search results views in tabs on the lower half. Column two is code, and is about two and a half times wider than the other two columns. (Since everybody has widescreen monitors at my office, we've standardized on 100-character lines instead of 80.) The third column has the debug view at the top, somewhat small; the variables, expressions and JUnit views in tabs below that, taking most of the vertical space; and a small breakpoints view below that. My secondary monitor has two torn off windows: the console takes up most of the screen, and below it I have a smaller window containging the problems and history views in tabs.
My only gripe is when I remote desktop in from my single-monitor setup at home: the two windows on the secondary monitor move over to the primary one. I have a "One Screen" perspective which I use in this scenario to rectify that, but when I'm back at work and switch to the dual-monitor perspective, I have to manually move the windows back over to the other monitor. I wish Eclipse would just leave them over there, but I can't see any way to make it do that.
I have my Package Explorer and Code on my primary monitor and the Console on my secondary monitor. I do this by right clicking over console tab and selecting Move.. then View.
This way I am able to drag, drop and resize the console window.
Hope this helps!
I did this by extending my eclipse to both monitors, in windows you can make your screens extended by holding win key and tapping P,
Then, selecting my left monitor as the main one I dragged the right side of the eclipse window to cover the other screen all the way. then made eclipse into three columns. Now my main monitor is dedicated to code editor and console and package explorer are on the other one! when you have a whole monitor for your code it always helps to use cntrl+{ and have a second vertical column for viewing the same file, or dragging the tab of another file to the side of screen to view both in the same time.
Finally I just saved my work from window > save Perspective As
I can switch between my normal and dual monitor perspective whenever I'm not in the office
I've reduced (but not eliminated) the need for the package explorer to always be showing by using Ctrl+Shift+R in eclipse, this pops up a filter-as-you type window that makes switching between files which you remember the name of easy, as well as accepting wildcards to make it easy to find files you partially remember the name of.
I keep source on my main screen and outline tasks and LogCat (android) on my secondary screen, if I find i'm reading a lot of web content i fire up my laptop via synergy as an independent third screen, it's not ideal but it works.
Does anyone know of a way to make Eclipse an SDI application rather than an MDI one?
SDI - Single document interface, each pane is its own window
MDI - Multiple document interface, all of the panes are stuck inside one "master" window.
Eclipse is an MDI application. All of the little panes (like the call stack, variable viewer, etc) are part of the one master Eclipse window. Rather than having all of the windows stuck inside one master "eclipse" window, I'd like them to all be their own free-floating windows.
To make a pane "free-floatting" just drag that pane outside the main eclipse window.
If you have only one monitor, you have to resize first your eclipse window: you can not leave eclipse maximized on all the screen space.
Then you have to drag your pane outside the eclipse window until you see the cursor change into a little window with a '+' in the middle.
Once all your panes are in the required position, save your configuration in a new perspective. (Menu Window\Save Perspective As)
That way, you can switch between panes configurations easily.
Regarding the SDI aspect however, the editor part of eclipse is made to edit several document (so, MDI only).
Karl's double-click suggestion is the most effective to focus on one of those edited document.
Hit the little X next to each document until there is only one open.
Alternatively, doubleclick on the tab to maximize it.
Then edit your question to give some more information about what you really want to do.
No, Unfortuantly Eclipse 3.x and lower do not allow the editor window to be outside the application window. You can drag other windows outside the main window to give you more editor space, but you cannot for example drag an editor outside the main eclipse window onto a second monitor and to have another code window open on the main monitor. This feature seems to be scheduled for Eclipse 4. See https://bugs.eclipse.org/bugs/show_bug.cgi?id=8886 for this feature.