Could someone suggest a tutorial/sample on how an Iphone application can send data to a remote server using Carrier Data Network only? In other words is there a way an application can programmatically force to enable Carrier Data Network communication, use it to send its request to the remote server and switch it back to user specific communication settings.
I am taking this approach because my application needs to send user's personal info to my server and sending it over public WiFi does not sound right. Please let me know if there is better approach to it....
Thanks
Since no one's writing a full answer ...
I don't know if it's possible to detect CDN vs Wi-Fi, although at some level it must be because the App Store is capable of determining such to prevent large CDN downloads. Of course, the App Store app has access to the private APIs; this functionality may not be exposed publicly. (I don't know if that is the case or not, but be sure you do not use private APIs for your app; the store won't accept it.)
That said, think about the use case of your app, and the marketplace. The iPhone OS and the iPhone App Store are more than just the phones themselves -- they're the iPhone and iPod Touch devices. iPod Touches do not have a CDN; they're Wi-Fi only for connectivity.
As Marc W said in a comment, not all Wi-Fi is public, not all public Wi-Fi is free, and you will likely upset a significant portion of your audience -- people (presumably and hopefully) giving you money.
A better solution would be to use SSL to provide encryption of the private data during transport. This is widely available, works over CDN or Wi-Fi, and provides all the security you should need.
If you look at the Apple Reachability example code, you can test for how you would access a host - however I agree with the other posters that you should consider encrypting your data and let your user's determine how they want to connect to the Internet, and not force one form of connection.
-t
Related
I am trying to prototype a solution to a problem and am currently exploring multiple routes I could try. Is it possible for one iOS device, running a certain app, to communicate directly with another iOS device, running the same application - without the need to be on the same LAN?
Solutions I am currently investigating are using Bluetooth and ad-hoc wireless connections.
Ideally, the application when installed would ask the user for the required permissions, and then would accept and/or send data to/from another client after a handshake had happened.
My concern with Bluetooth is that 'pairing' would need to happen with every device, rather than happen in the background once the user has installed the app. I have a feeling what I am talking about isn't possible from what I've been reading elsewhere on Stackoverflow.
Take a look at Bluetooth Low Energy.
https://developer.apple.com/library/ios/#samplecode/BTLE_Transfer/Introduction/Intro.html#//apple_ref/doc/uid/DTS40012927
Here is another example,
https://github.com/KhaosT/CBPeripheralManager-Demo
You might also want to look into GameKit and peer-to-peer connectivity there.
I can't tell you anything about it, but you might try looking at iOS 7. If that's an option, I'd take a look. Can't talk about what it is because of NDA though.
Depending on what you need to communicate, you could try checking out this project, which lets you share arrays of strings between iOS devices over Bluetooth LE.
You don't need to "pair" the devices and it can still communicate while the app is in the background. SimpleShare
Hope it helps!
From the documentation of MultipeerGroupChat:
MultipeerGroupChat sample application utilizes the Multipeer Connectivity framework to enable nearby users to discover, connected, and send data between each other. This sample simulates a simple chat interface where up to 8 devices can connect with each other and send text messages or images to each other. Here you will learn how to bring up framework UI for discovery and connections and also how to monitor session state, listen for incoming data and resources, and send data and resources.
This is an excellent example at developer.apple.com here is the link
https://developer.apple.com/library/ios/samplecode/MultipeerGroupChat/Introduction/Intro.html
Also this tutorial from Ralf Ebert demonstrates how to use Multipeer Connectivity framework for peer communication should help you.
https://www.ralfebert.de/tutorials/ios-swift-multipeer-connectivity/
My iPhone connects over adhoc wifi to a wifi sensor module.
The challenge is to code an app that uses this sensor module. But I'm not sure what specific API's to use to best architect this implementation.
I've started looking into the CocoaAsyncSocket class as it seems to be an appropriate tool for such use.
Does the user always have to manually connect to the adhoc wifi device? (through the Settings app) or can my own app handle the searching, making, and breaking of the wifi connection?
I doubt iOS lets me programmatically toggle whether Wifi is on/off.
Once the sensor data is being received, what container would best handle the stream?
For example, on other platforms, I coded a rotating queue buffer.
Thanks for your input.
Edit: The protocol in question is straight CSV formatted ASCII. Not HTTP, FTP, etc. Just raw data. The app is to simply open a port on the connected IP, and read/write.
Your application cannot turn wifi on/off, or select a wifi network.
Without more information on what protocols this wifi sensor module speaks, it will be impossible for anyone to give more than vague recommendations. If the module can serve data over an http connection, that would probably be ideal. If it requires your software to open a connection on a specific port and communicate over something other than http or ftp, your job will be a bit more complicated. CFNetwork and projects derived from it's usage, such as CocoaAsyncSocket which you mentioned. You can see another implementation of an HTTP connection over CFNetwork in ASIHTTPRequest, that may help as a reference for handling download streams, queuing operations, etc.
As for storing the data, again it's hard to give any concrete recommendations without more information. If you want to store the data to the filesystem of the iOS device, NSData will probably meet your needs. If you need/prefer to use a queue for buffering data, there is a simple category on NSArray which provides queue semantics. The link to CHCircularBuffer in that SO article is dead, but this github project appears to have it.
edit: Here is the official version of the CHDataStructures. I don't know if it's an improvement over the previous link, but it appears to be updated for the more recent iOS SDK.
Add the SSID of your wifi ad hoc networks in settings. When you see the SSID of the network, click the arrow and choose connect automatically. After this, the phone will automatically connect whenever it comes in range. After this, the two devices can communicate using regular socket APIs.
I'm just getting started with mobile development, and after considerable searching I'm still confused about sending a message from my iPhone to another or an Android. For instance, in building a simple Tic-Tac-Toe game, if I want to notify the other phone of a move, what is the best way to do so? Wifi, bluetooth, 3G? And how?
Many methods seem to point to communicating through a web server, but I'd rather send them directly from phone to phone if possible. (this is for native apps of course)
If you don't want to have a server (or even if you do! It depends!) it sounds like you will want to use TCP sockets. Apple doesn't have a generic bluetooth API to use with iPhone-to-android communication and you'll have TCP access anyway with 3G. A 3G network connection is very similar to wifi and you should be able to check for the difference as needed with little change to your overall networking code. I'm not sure if bonjour is supported on android, but I bet someone has ported it for similar reasons already, and it is supported in iOS. Apple has a networking section for iOS that you may find informative.
Additionally if you want to stay within the iOS device only realm you could use GameKit to communicate via bluetooth.
Hope that helps some.
The easiest way is to create a web server with an API and the clients poll the server for new moves (or the server pushes the client an update). This is the only way you're going to be able to do it over 3G unless you can figure out the IP addresses of both phones (do phones even keep the same IP address for a long period of time?) and open up sockets between them and let one phone be the server and the other be the client (could cause potential cheating).
WiFi is not always there - by limiting your users' options to areas with access points, you'll lose sales. Not sure about Bluetooth - how prevalent is it on handsets, how much of the API is exposed. Your best bet, IMHO, is 3G. With some kind of a central presence server (Web or otherwise), with optional proxying. Read up on peer-to-peer networking.
As far as i know does the iphone only support incoming messages over push notifications.
This means, that you have to update the information, by requesting it from web services etc.
The bluetooth API of the iphone doesn't support this either.
I want to send some Text plus a image from one iphone application to other iphone app but restriction is I should not use a web server in between communication,Is there any way to fulfill it ?
Details: There are two independent devices and could be far enough say out of network. My requirement one app adds some text with a image and sends it to another iphone which can be at any long distance , and the app installed in another iphone will read that info and image into itself.
Actually there is a solution that meets your needs — and that fits to bbums answer:
Create a HTTP-Server on the iPhone, using cocoahttpserver. than you will ask some webservice like whatismyip.com for your public ip. with this your iPhone can be connected worldwide.
But very likely ur wifi-network is not forwarding your port to the iPhone. Ash.
And even if: Now it gets difficult. How to publish your ip from one phone to the other? hmmm... — I got it: I will exchange the information in a centralized space! In the web!
... wait — that would be a Webserver.
You see: Without any kind of server in the Web the users would need to exchange ip manually and have full admin power and knowledge about the local network.
So IMHO bbums answer is the only way to go.
PS: I am working with http server running on iPhones. In local network that works great, especially with bonjour. And you can use them over distance network — but only with reconfiguration of your router — something you shouldn't force your user to do
There is far from enough information to provide a specific answer.
two apps on two different devices?
are the two devices on the same network?
are the two devices both on WiFi?
do you need the user to receive a notification or something if the app isn't running?
If on same device, you can define a custom URL handler in the destination app and then openURL: in the source app to pass the data over. Encode your image and text into the URL, but be careful of size limitations.
If on different devices, there are many possible solutions, but answering the above questions will be critical to actually knowing what solution is appropriate.
Given your comment -- two apps, different devices, arbitrary networks -- then you are going to have to have some kind of server in between. Note that the recently added Game Center does have the ability to rendezvous two users, but it has a very particular user experience that may not be appropriate to your needs.
I would suggest that you investigate using push notifications to notify the receiving user of the availability of content. As for moving the content between, no direct connection is possible and you will have to have some kind of store-and-forward server in between. And, yes, a web server is going to be the easiest possible solution simply because HTTP is ubiquitous these days.
If there's no network of any kind available, but both parties have amateur radio licenses, then hooking the two devices up to HF packet radios might work.
THIS is super EASY.
I would code up some software that can turn data into modem signal, like the good old dial up modem. The device would actually make those annoying buzzing sounds.
You get the phone number for your friends nearest landline and call him.
He places his iPhone near the phones receiver in listen mode and you connect to his phone using your audible modem.
Bingo, via the power of sounds you have sent data which is decoded on his device and all for the very cheap price of a phone call, there are pretty cheap these days especially if you use Skype.
Easy Way (relatively speaking)
A way two apps on different networks can communicate without setting up a web server of some sort is as follows.
Use an existing third party storage system like DropBox.
Each app would need the login and password for your DropBox. Then both apps can read and write files that the other app can see.
An existing app that does this is a shopping list app called ShopShop.
The app on my phone and my wife's phone both link to the same DropBox account and the app keeps the shopping list synced up when one of us adds something to the list.
When Apple's Remote app tries to connect to a Mac (running iTunes) on a local network (using WiFi), the user needs to enter a passcode provided by the iPhone as a security measure. This approach has been adopted by a number of other apps (e.g., Rowmote, Pastebot, ...). Is there an API that provides this way of working?
Assuming Bonjour is in play, how does an iPhone checks if the passcode entered on a Mac is correct without resolving the NSNetService the Mac is publishing? Or does the iPhone resolve the NSNetService a Mac is publishing and waits for the passcode to be confirmed before processing any other packets that might be sent via the NSNetService (packets other than the passcode).
I have a solution for my problem, but I would like to know if there's an API I have overlooked that provides a ready-made solution.
Advice and pointers are welcome.
Thanks in advance,
Bart
I don't believe there is an Apple provided API for this. I simply use the Bonjour APIs to open a connection between two devices, then have one randomly create a 4 digit passcode and ask the other device for it. The other device presents a UI to ask the user for the passcode, then transmits it back and waits for an answer. If they match, the devices store each other's identifiers to skip over this process the next time they connect.
Edit: Thanks to tc for pointing out that this implementation isn't totally secure. I'm now having one device create a unique, random password, and send it over to the other device, then store the SHA1 hash of the password for future reference. Then the other device stores the password and sends it back over whenever it connects for authentication. The user does the number code thing once in order to let the devices know that they should trust each other in the future, but now in order for a reverse engineer to connect to a device they would have to know both the identifier of and password for a valid, connected device. (Or they'd have to have access to both devices and do the number code thing; there isn't really a way to stop anyone from doing that, obviously).