Getting ReferenceError: swDest is not defined when trying to run Workbox 6.
In my sw_build.js file I have that I call with node sw_build.js in my package.json file...
In the console I see this as the output:
It appears as though the files get created?, I just don't understand why I'm getting the odd error.
Your swDest reference is in line 16, and swDest is not defined. That's why the file is created but error occurs. I think you copied the example code without modification on this line.
Does anyone use pgmail?
In order to use it, I need to first install postgresql-tcl. However, even after installing it on postgresql-12 - while running below command:
CREATE EXTENSION pltcl;
I'm getting below error:
ERROR: could not open extension control file "/usr/pgsql-12/share/extension/pltcl.control": No
such file or directory
What I have tried:
I followed https://tunnelix.com/messing-around-pltcl-on-postgresql/ and instead of CREATE EXTENSION , I used CREATE LANGUAGE. However, I again I got below error:
shiwangini1=# CREATE language pltcl;
ERROR: could not access file "$libdir/pltcl": No such file or directory
What else can I do to make it working?
Thanks in advance!
In my Vue-CLI project, when I tried using the ?? operator, I got this error:
Syntax Error: SyntaxError: /Users/stevebennett/odev/freelancing/v-map/src/components/Map.vue: >Support for the experimental syntax 'nullishCoalescingOperator' isn't currently enabled (30:29):
...
Add #babel/plugin-proposal-nullish-coalescing-operator (https://git.io/vb4Se) to the 'plugins' section of your Babel config to enable transformation.
I installed #babel/plugin-syntax-nullish-coalescing-operator (its name seems to have changed), added it to my babel.config.js:
module.exports = {
presets: ['#vue/app'],
plugins: ['#babel/plugin-syntax-nullish-coalescing-operator'],
};
Now the error message seems to have gone backwards, no reference to the operator name at all:
Module parse failed: Unexpected token (39:35)
You may need an appropriate loader to handle this file type.
| case 8:
| points = _context.sent;
console.log(sheetID ?? 37);
What am I doing wrong?
For me, the #babel/plugin-syntax-nullish-coalescing-operator plugin would not work, which is the one you are using.
I had to use the #babel/plugin-proposal-nullish-coalescing-operator plugin which is the one that the error message suggests you use.
Additionally, I noticed this on the page for the #babel/plugin-syntax-nullish-coalescing-operator plugin:
I can't say for sure if this will fix your problem, but it certainly fixed mine
Trying to move from local host to new server. Fresh install worked fine, no problems. When I uploaded my files mydomain.com/admin comes up with a white screen and mydomain.com produces this error:
Fatal error: Call to a member function get() on a non-object in /home4/pawpostc/public_html/index.php on line 103.
So I took a look at index.php line 103:
if ($config->get('config_error_display')) {
echo '<b>' . $error . '</b>: ' . $errstr . ' in <b>' . $errfile . '</b> on line <b>' . $errline . '</b>';
}
Seems like there is a problem with my config files. So I went and had a look at them. I have gone over them a few times but can not find the mistake, probably missing something, so here are the config files.
config.php (in my root www. folder):
<?php
// HTTP
define('HTTP_SERVER', 'http://www.pawpost.com.au/');
define('HTTP_IMAGE', 'http://www.pawpost.com.au/image/');
define('HTTP_ADMIN', 'http://www.pawpost.com.au/admin/');
// HTTPS
define('HTTPS_SERVER', 'http://www.pawpost.com.au/');
define('HTTPS_IMAGE', 'http://www.pawpost.com.au/image/');
// DIR
define('DIR_APPLICATION', '/home4/pawpostc/public_html/catalog/');
define('DIR_SYSTEM', '/home4/pawpostc/public_html/system/');
define('DIR_DATABASE', '/home4/pawpostc/public_html/system/database/');
define('DIR_LANGUAGE', '/home4/pawpostc/public_html/catalog/language/');
define('DIR_TEMPLATE', '/home4/pawpostc/public_html/catalog/view/theme/');
define('DIR_CONFIG', '/home4/pawpostc/public_html/system/config/');
define('DIR_IMAGE', '/home4/pawpostc/public_html/image/');
define('DIR_CACHE', '/home4/pawpostc/public_html/system/cache/');
define('DIR_DOWNLOAD', '/home4/pawpostc/public_html/download/');
define('DIR_LOGS', '/home4/pawpostc/public_html/system/logs/');
// DB
define('DB_DRIVER', 'mysql');
define('DB_HOSTNAME', 'localhost');
define('DB_USERNAME', 'my user name');
define('DB_PASSWORD', 'my password');
define('DB_DATABASE', 'my database');
define('DB_PREFIX', 'oc_');
?>
admin/config.php:
<?php
// HTTP
define('HTTP_SERVER', 'http://www.pawpost.com.au/admin/');
define('HTTP_CATALOG', 'http://www.pawpost.com.au/');
define('HTTP_IMAGE', 'http://www.pawpost.com.au/image/');
// HTTPS
define('HTTPS_SERVER', 'http://www.pawpost.com.au/admin/');
define('HTTPS_CATALOG', 'http://www.pawpost.com.au/');
define('HTTPS_IMAGE', 'http://www.pawpost.com.au/image/');
// DIR
define('DIR_APPLICATION', '/home4/pawpostc/public_html/admin/');
define('DIR_SYSTEM', '/home4/pawpostc/public_html/system/');
define('DIR_DATABASE', '/home4/pawpostc/public_html/system/database/');
define('DIR_LANGUAGE', '/home4/pawpostc/public_html/admin/language/');
define('DIR_TEMPLATE', '/home4/pawpostc/public_html/admin/view/template/');
define('DIR_CONFIG', '/home4/pawpostc/public_html/system/config/');
define('DIR_IMAGE', '/home4/pawpostc/public_html/image/');
define('DIR_CACHE', '/home4/pawpostc/public_html/system/cache/');
define('DIR_DOWNLOAD', '/home4/pawpostc/public_html/download/');
define('DIR_LOGS', '/home4/pawpostc/public_html/system/logs/');
define('DIR_CATALOG', '/home4/pawpostc/public_html/catalog/');
// DB
define('DB_DRIVER', 'mysql');
define('DB_HOSTNAME', 'localhost');
define('DB_USERNAME', 'my user name');
define('DB_PASSWORD', 'my password');
define('DB_DATABASE', 'my database');
define('DB_PREFIX', 'oc_');
?>
Any help on this would be appreciated.
I was using opencart and installed vqmod.
All of a sudden I have one of the same errors.
This solved my problem:
in system/library/session.php
replace start session with:
session_save_path(realpath(dirname($_SERVER['DOCUMENT_ROOT']) . '/../tmp'));
The most likely issue is that one or more of your library files are corrupt from uploading. Re upload your system/library/ folder from your local one. Your config files seem fine and the error doesn't reference a config issue. What is line 103 in your index.php file?
please cross check you have set all permissions
i had came across this error and was solved,
that was due to a file permission problem
I was struggling with the same problem after migrating my site to a new VPS environment. I figured it HAD to be something to do with the changed document-root path or permissions of my shop and pulled out a lot of hair trying to get to the core of the problem.
I finally realised that I had incorrect permissions on my PHP session-data store! In my case, the folder at /var/lib/php/session/ was owned by apache (naturally) but I had changed apache to run as a different user so it could no longer write to the session-store.
The error messages in this case are cryptic (to say the least!) and didn't give a clue that the problem might just be lack of write permission!
Oh well, we should know by now that 90% of unix issues are down to perms!
I upload a file at my server (directory: vqmod/....php ).
Just change vqmod file permission. I set 777 and that solved it.
From the error you received, it looks like the $config variable is not getting set.
The $config variable is set on line 35 using the Config class which is located in system/library/config.php
I think if you figure out why the class isn't getting instantiated, you'll be able to fix the issue.
This could be a couple things:
The system/library/config.php file may not have been uploaded to the new server
As mentioned in previous answers, there could be a permissions issue. Check the permissions of system/library/config.php and make sure the correct user has ownership.
Or it could be a completely unrelated issue.
The error is due to permissions set on the cache folder. Setting that to 755 and the files to 555 with set you home and dry.
I had the same issue. I changed vqmod permission to 777. I am not sure this solved the problem, but I checked my website without adding www. before the domain and it worked. The warning was removed if I check http://daytodaystore.com. If I check http://www.daytodaystore.com, the warning is there.
I had this problem when i migrated my server from 2G to 4GH on Godaddy.
Came across this forum and found that the issue is with session.php
Then, i guessed 'tmp' folder was missing. So, i created one just one step above html folder. and gave it a 777 access. Problem was fixed and my website looks great after that.
First, Let me thank for the log4cplus source code.
I am facing one issue as follows:
What I am trying to do?
I want to log the messages to event log on windows.
What did I do?
I could get the event logging enabled by in including following .h
#include <log4cplus/nteventlogappender.h>
And creating the appender as follows:
SharedAppenderPtr append_3(new NTEventLogAppender(LOG4CPLUS_TEXT("127.0.0.1"), LOG4CPLUS_TEXT("log"), LOG4CPLUS_TEXT("source")));
append_3->setName(LOG4CPLUS_TEXT("ToEventlog"));
Logger to_eventlog = Logger::getInstance(LOG4CPLUS_TEXT("to_eventlog"));
to_eventlog.addAppender(append_3);
to_eventlog.setLogLevel(log4cplus::ALL_LOG_LEVEL);
And logging as
Logger to_eventlog = Logger::getInstance(LOG4CPLUS_TEXT("to_eventlog"));
LOG4CPLUS_FATAL(to_eventlog, “Test Message.”);
When I log the message, I get following in the event log:
The description for Event ID 4096 from source source cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Test Message.
the message resource is present but the message is not found in the string/message table
I tried to create a dll with name NTEventLogAppender.dll with string table resource and a string with id 4096 (as hardcoded in the nteventlogappender.cxx file in log4cplus) and compiled it with resource only dll (/NOENTRY) but I still keep getting above error.
I already tried question to log4cplus-devel#lists.sourceforge.net but did not get any answer yet.
Any help on how to create this dll would be greatly appreciated.
Thanks.
This is how I resolved this issue:
comipiled NTEventLogAppender.mc file using commands:
mc -U NTEventLogAppender.mc
rc -r NTEventLogAppender.rc
link -dll -noentry -out:NTEventLogAppender.dll NTEventLogAppender.res
where NTEventLogAppender.mc has following contents
MessageIdTypedef=DWORD
SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
Warning=0x2:STATUS_SEVERITY_WARNING
Error=0x3:STATUS_SEVERITY_ERROR
)
FacilityNames=(System=0x0:FACILITY_SYSTEM
Runtime=0x2:FACILITY_RUNTIME
Stubs=0x3:FACILITY_STUBS
Io=0x4:FACILITY_IO_ERROR_CODE
)
LanguageNames=(English=0x409:MSG00409)
; // The following are message definitions.
MessageId=0x1000
SymbolicName=SVC_TEST
Language=English
A message for something.
.
; // A message file must end with a period on its own line
; // followed by a blank line.
copied the NTEventLogAppender.dll to c:\windows\system32
and ran the above mentioned test program and found that event log found the message resource correctly.
you need to register this dll by copying following in .reg file and running the same
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\log\source]
"EventMessageFile"="C:\\windows\\system32\\NTEventLogAppender.dll"
"CategoryMessageFile"="C:\\windows\\system32\\NTEventLogAppender.dll"
"TypesSupported"=dword:00000007
"CategoryCount"=dword:00000005