I’m trying to replace pc-selection-mode with the new shift-select-mode with emacs 23. It works generally well, only the shift+pgup/down keys don’t create a selected region and I can’t find a confguration setting where I could tell emacs I want these keys too shift translated. Are the supported keys hardcoded? It would be so unlike emacs, so there must be some setting somewhere which I overlook. Any ideas?
I removed PC-select mode and this just worked. For the record, here's what I get for the Page-Down key from describe-key:
<next> (translated from <S-next>) runs the command scroll-up, which is
an interactive built-in function in `C source code'.
It is bound to <next>, C-v.
(scroll-up &optional ARG)
...
With pc-select-mode enabled, Shift-PageUp is bound to scroll-down-mark and Shift-PageDown scroll-up-mark. scroll-down-mark is from pc-select.el so you have to require it before binding the keys (you don't have to enable pc-select).
Binding keys as mentioned can be done evaluating:
(require 'pc-select)
(global-set-key (kbd "S-<prior>") 'scroll-down-mark)
(global-set-key (kbd "S-<next>") 'scroll-up-mark)
Related
This s-expression in my .emacs file does not produce the desired result:
(define-key global-map (kbd "C-=") 'djhaskin987-untab-to-tab-stop)
Why can't I bind a command to Ctrl+=?
EDIT for clarification:
I am using emacs23-nox on the standard build of urxvt-256colors for Debian, except that I have recompiled with --disable-iso405776 (or something to that effect) it so that Ctrl+Shift doesn't do the weird 'insert character' thing. I don't know if this affects anything. For example, C-M-i sends M-TAB, which I don't understand.
EDIT II:
I apologize for not making this clear. The function djhaskin987-untab-to-tab-stop has the line (interactive) in it. This part works.
The accepted answer in combination with the link in the first comment to it is enough to get started on a complete solution. The steps are:
make your terminal output escape codes for the key
make Emacs recognise the escape codes as a standard keypress
bind the keypress in a mode map
The first is very terminal and/or operating system dependent.
The link in the first comment shows some examples for X Window System. The key names are available in /usr/X11R6/include/X11/keysymdef.h (or try locate keysymdef.h), prefixed with XK_ (which should be removed for our purposes). I read that symbolic names are preferred over key literals.
I don't currently run X but I think it should look like this in your case:
XTerm.VT100.Translations: #override \
Ctrl ~Meta ~Shift <Key> equal: string(0x1b) string("[emacs-C-=")\n
The first string is the escape, the second is of your choosing.
In iTerm you can use Preferences->Keys and choose Send Escape Sequence as the Action. For example, I have:
Emacs Wiki lists some configuration methods for other terminals.
Now you can teach Emacs to recognize it as a C-=. First define-key into input-decode-map. I have a couple of helper functions:
(defun my/global-map-and-set-key (key command &optional prefix suffix)
"`my/map-key' KEY then `global-set-key' KEY with COMMAND.
PREFIX or SUFFIX can wrap the key when passing to `global-set-key'."
(my/map-key key)
(global-set-key (kbd (concat prefix key suffix)) command))
(defun my/map-key (key)
"Map KEY from escape sequence \"\e[emacs-KEY\."
(define-key function-key-map (concat "\e[emacs-" key) (kbd key)))
So then:
(my/global-map-and-set-key "C-=" 'some-function-to-bind-to)
Some keys (currently: ()\|;'`"#.,) will need escaping in the string, like C-\..
In a terminal, TAB is represented by the same byte sequence as C-i. And typically the terminal has no special byte-sequence for C-=, so it will just send a =. There is nothing that Emacs can do about it. But you might be able to teach your terminal emulator to send some special byte sequence of your choice (check the documentation of your terminal emulator for that), after which you can teach Emacs to recognize it as a C-= (with something like (define-key input-decode-map "...thebytes..." [?\C-=])).
The problem is that you use emacs in the terminal.
The terminal does not allow "C-=".
Try your function in the graphical emacs and it will work.
You will have to find another keybinding for the terminal.
You can map C-= using the default ascii codes: ^[[61;5u. Then you can bind it in Emacs either using:
(global-set-key (kbd "C-=") 'djhaskin987-untab-to-tab-stop))
or let use-package do it, e.g.:
(use-package expand-region
:ensure t
:bind (("C-=" . er/expand-region)))
I do want to thank Sam Brightman, for his wonderful solution. It's a very clean, albeit heavy-handed, approach that will work for any keys that cannot be sent via normal ascii codes. I've been wanting to get C-TAB working inside iterm2 for a long time. I was able to do it by deleting the builtin preferences keys for C-TAB/C-S-TAB and using his approach. With the following, I can be ssh'd into remote Linux boxes and quickly switch through lots of open buffers in projects, just like a desktop editor.
(use-package nswbuff
:defer 1
:after (projectile)
:commands (nswbuff-switch-to-previous-buffer
nswbuff-switch-to-next-buffer)
:config
(progn
(my/global-map-and-set-key "C-TAB" 'nswbuff-switch-to-previous-buffer)
(my/global-map-and-set-key "C-S-TAB" 'nswbuff-switch-to-next-buffer))
:init
(setq nswbuff-display-intermediate-buffers t
nswbuff-exclude-buffer-regexps '("^ "
"^\*.*\*"
"\*Treemacs.*\*"
"^magit.*:.+")
nswbuff-include-buffer-regexps '("^*Org Src")
nswbuff-start-with-current-centered t
nswbuff-buffer-list-function '(lambda ()
(interactive)
(if (projectile-project-p)
(nswbuff-projectile-buffer-list)
(buffer-list)))))
The function you're binding must be interactive. Try:
(define-key global-map (kbd "C-=")
(lambda () (interactive) (djhaskin987-untab-to-tab-stop)))
I’m on a Mac and would like to use the function key F19 as meta.
(There’s a good reason, although it's a bit of a hack: My built (the otherwise excellent port by Yamamoto Mitsuharu) doesn’t support using only the left alt key as meta while preserving the native behavior (inserting special characters) of the right alt key.. So I remapped the left alt key to an unused key - F19 - on the system level with PCKeyboardHack (xmodmap is sorely missed) and would like to tell Emacs to use that as meta.)
So, how do I: use a function key (F19 in my case) as meta key in Emacs?
(I’m fairly new to Emacs and, after some googling, tried out something like
(define-key global-map [f19] \M)
but that, of course, doesn’t do the trick (Symbol’s value as variable is void: M)
Well, with
(setq x-alt-keysym symbol)
you can tell emacs what key is to be understood as meta, but afaik it only accepts 'meta, 'alt, 'super and 'hyper as symbol. Maybe try it with f19.
An alternative option that will work but which will require adaption to a new way of working would be to use F19 as a prefix key (like you use C-h or F1 to invoke help commands):
(define-prefix-command 'f19-map)
(global-set-key (kbd "<f19>") 'f19-map)
(global-set-key (kbd "<f19> x") 'execute-extended-command)
(global-set-key (kbd "<f19> u") 'upcase-word)
...
Writing the configuration shouldn't be too hard. Just press C-h b to get all existing keybindings and edit the help buffer. Get rid of all lines that don't start with M-, then use rectangles to replace all occurrences of ^M- by (global-set-key (kbd ", and so on.
Yet another option would be to bind the key to Esc instead of F19, as long as that's supported by your system, and use the esc prefix instead of the f19 prefix. That way you don't have to change the emacs configuration at all.
How do I clear a binding or edit a binding an emacs package provide?
For instance I had keybindings M-c to capitalize a word.
After I install some 3rd party emacs package, it is changed to calc-dispatch.
I'd like to use M-c as capitalize as before, and set calc-dispatch to something else.
How can I do this in general?
The keybind maps are loaded by order. The keybind map which loaded later will have higher priority. This is why the local key map will override the global keymap, because the global key map is loaded before the local key map(the mode key map). Something is wrong here. Look phils's comment.
What I solve this problem is add a hook to that specify mode to disable that key bind and rebind it to other key in that key map.
First, you need to find the key-map name which defines the M-c bind to calc-dispatch.
It is usually the combination of mode name and mode-map.
For example, the name of python mode key map is py-mode-map.
Second, remove the M-c bind in that mode and rebind to other key using hook.
For example, in python mode, I want to remove the bind C-j (py-newline-and-indent). And rebind it to C-i. Because globally I bind C-j to linum-ace-jump. This is the similar case with yours.
(add-hook 'python-mode-hook
#'(lambda ()
(define-key py-mode-map "\C-j" nil)
(define-key py-mode-map "\C-i" 'py-newline-and-indent)))
What you ask for is:
(global-set-key (kbd "M-c") 'capitalize-word)
This is in general the way to set words globally.
Maybe if you want to substite the two, you can try this:
(substitute-key-definition
'capitalize-word 'calc-dispatch (current-global-map))
(define-key KEYMAPNAME (kbd "KEYCOMBO") 'FUNCNAME)
Is for specific mode. For example: (define-key emacs-lisp-mode (kbd "M-c) 'capitalize-word).
(global-set-key (kbd "M-c") nil)
Is to generally unbind a key (globally).
You can easily find more on this by just googling.
This s-expression in my .emacs file does not produce the desired result:
(define-key global-map (kbd "C-=") 'djhaskin987-untab-to-tab-stop)
Why can't I bind a command to Ctrl+=?
EDIT for clarification:
I am using emacs23-nox on the standard build of urxvt-256colors for Debian, except that I have recompiled with --disable-iso405776 (or something to that effect) it so that Ctrl+Shift doesn't do the weird 'insert character' thing. I don't know if this affects anything. For example, C-M-i sends M-TAB, which I don't understand.
EDIT II:
I apologize for not making this clear. The function djhaskin987-untab-to-tab-stop has the line (interactive) in it. This part works.
The accepted answer in combination with the link in the first comment to it is enough to get started on a complete solution. The steps are:
make your terminal output escape codes for the key
make Emacs recognise the escape codes as a standard keypress
bind the keypress in a mode map
The first is very terminal and/or operating system dependent.
The link in the first comment shows some examples for X Window System. The key names are available in /usr/X11R6/include/X11/keysymdef.h (or try locate keysymdef.h), prefixed with XK_ (which should be removed for our purposes). I read that symbolic names are preferred over key literals.
I don't currently run X but I think it should look like this in your case:
XTerm.VT100.Translations: #override \
Ctrl ~Meta ~Shift <Key> equal: string(0x1b) string("[emacs-C-=")\n
The first string is the escape, the second is of your choosing.
In iTerm you can use Preferences->Keys and choose Send Escape Sequence as the Action. For example, I have:
Emacs Wiki lists some configuration methods for other terminals.
Now you can teach Emacs to recognize it as a C-=. First define-key into input-decode-map. I have a couple of helper functions:
(defun my/global-map-and-set-key (key command &optional prefix suffix)
"`my/map-key' KEY then `global-set-key' KEY with COMMAND.
PREFIX or SUFFIX can wrap the key when passing to `global-set-key'."
(my/map-key key)
(global-set-key (kbd (concat prefix key suffix)) command))
(defun my/map-key (key)
"Map KEY from escape sequence \"\e[emacs-KEY\."
(define-key function-key-map (concat "\e[emacs-" key) (kbd key)))
So then:
(my/global-map-and-set-key "C-=" 'some-function-to-bind-to)
Some keys (currently: ()\|;'`"#.,) will need escaping in the string, like C-\..
In a terminal, TAB is represented by the same byte sequence as C-i. And typically the terminal has no special byte-sequence for C-=, so it will just send a =. There is nothing that Emacs can do about it. But you might be able to teach your terminal emulator to send some special byte sequence of your choice (check the documentation of your terminal emulator for that), after which you can teach Emacs to recognize it as a C-= (with something like (define-key input-decode-map "...thebytes..." [?\C-=])).
The problem is that you use emacs in the terminal.
The terminal does not allow "C-=".
Try your function in the graphical emacs and it will work.
You will have to find another keybinding for the terminal.
You can map C-= using the default ascii codes: ^[[61;5u. Then you can bind it in Emacs either using:
(global-set-key (kbd "C-=") 'djhaskin987-untab-to-tab-stop))
or let use-package do it, e.g.:
(use-package expand-region
:ensure t
:bind (("C-=" . er/expand-region)))
I do want to thank Sam Brightman, for his wonderful solution. It's a very clean, albeit heavy-handed, approach that will work for any keys that cannot be sent via normal ascii codes. I've been wanting to get C-TAB working inside iterm2 for a long time. I was able to do it by deleting the builtin preferences keys for C-TAB/C-S-TAB and using his approach. With the following, I can be ssh'd into remote Linux boxes and quickly switch through lots of open buffers in projects, just like a desktop editor.
(use-package nswbuff
:defer 1
:after (projectile)
:commands (nswbuff-switch-to-previous-buffer
nswbuff-switch-to-next-buffer)
:config
(progn
(my/global-map-and-set-key "C-TAB" 'nswbuff-switch-to-previous-buffer)
(my/global-map-and-set-key "C-S-TAB" 'nswbuff-switch-to-next-buffer))
:init
(setq nswbuff-display-intermediate-buffers t
nswbuff-exclude-buffer-regexps '("^ "
"^\*.*\*"
"\*Treemacs.*\*"
"^magit.*:.+")
nswbuff-include-buffer-regexps '("^*Org Src")
nswbuff-start-with-current-centered t
nswbuff-buffer-list-function '(lambda ()
(interactive)
(if (projectile-project-p)
(nswbuff-projectile-buffer-list)
(buffer-list)))))
The function you're binding must be interactive. Try:
(define-key global-map (kbd "C-=")
(lambda () (interactive) (djhaskin987-untab-to-tab-stop)))
Cannot get to bind Enter to newline-and-indent in Emacs !!! Very annoying.
I already tried everything on the following thread by changing 'mode' to ruby and still nothing:
How do I make Emacs auto-indent my C code?
I know that the problem is the RETURN key, since if I bind to something else, works fine.
I tried [enter], (kbd "enter"), (read-kbd-macro "enter"), (kbd "RET")
Follow-up 1.
This is what I get from C-hkRET
RET runs the command newline, which is an interactive compiled Lisp
function.
It is bound to RET.
(newline &optional ARG)
Insert a newline, and move to left margin of the new line if it's blank.
If use-hard-newlines' is non-nil, the newline is marked with the
text-propertyhard'.
With ARG, insert that many newlines.
Call auto-fill-function' if the current column number is greater
than the value offill-column' and ARG is nil.
I dont know what to make of it or how to figure out if it's a global
or local binding that gets in the way. trying to remap C-j
also doesnt work.
As a previous comment says, use C-h k (describe-key) to see what the key is bound to at the point when it's not doing what you want. The (kbd "foo") syntax will be correct for whichever foo describe-key refers to it as.
Chances are that you are simply not defining that key in the appropriate keymap.
Note that major and minor mode keymaps take precedence over the global keymap, so you shouldn't necessarily be surprised if a global binding is overridden.
edit:
Myself, I have a hook function for common behaviours for all the programming modes I use, and it includes the sort of remapping you're after. The relevant part looks like this:
(defun my-coding-config ()
(local-set-key (kbd "RET") (key-binding (kbd "M-j")))
(local-set-key (kbd "<S-return>") 'newline)
)
(mapc
(lambda (language-mode-hook)
(add-hook language-mode-hook 'my-coding-config))
'(cperl-mode-hook
css-mode-hook
emacs-lisp-mode-hook
;; etc...
))
See Daimrod's answer for the explanation of why I'm re-binding RET to the current binding of M-j -- although I'm using comment-indent-new-line (or similar) instead of newline-and-indent (or similar), which does what I want in both comments and non-comments.
In Emacs 24, programming modes seem to derive from prog-mode, so you could probably (un-tested) reduce that list to prog-mode-hook plus any exceptions for third-party modes which don't yet do that.
As said earlier, use C-hkC-j because
C-j is the standard key to do newline-and-indent.
If you open a new file, activate ruby-mode and try the previous
command you will see why it doesn't work. Because ruby-mode doesn't
have newline-and-indent but rather
reindent-then-newline-and-indent. Yes that's stupid but you can either ask
to the maintener to change it, or accept it.
However I suggest you to use C-j to do it because
ruby-mode is not the only mode to do so, like paredit-mode which
uses paredit-newline.