I created a config/sphinx.yml file with the line:
morphology: stem_en
After running rake ts:config, it doesn't seem to have changed development.sphinx.conf, and following a rebuild, searching for "dawg" doesn't match "dawgs".
How can I get this to work?
If I recall correctly the morphology line should fall under a "development" header like so:
development:
morphology: stem_en
Not sure if you've done so already, but if not give it a try.
Related
I'm trying to run madge on a fairly big typescript project. Its compiled output goes to dist/*, and its React frontend are in public/*. Madge's documentation is pretty clear about how to exclude directories, but no matter what I try, it appears to still be checking these directories.
First attempt:
madge --circular --extensions ts,js --exclude '^(dist|public)' --ts-config ./tsconfig.json --warning .
The reason I think it's still checking there is because, first, I still see it scanning those directories as it runs:
And also, its warnings show imports that only occur in public/:
(the '#'-style import is from module-alias)
What I've tried:
Using a regex like ^.*public.*$
Specifying the excludes in .madgerc rather than on cli:
{
"fileExtensions": ["js","ts"],
"tsConfig": "tsconfig.json",
"excludeRegExp": ["^.*dist.*$", "^.*public.*$"]
}
Running with --debug (the output is so massive I can't really make much of it - if I run it to console it crashes with out-of-memory, and if I pipe to a file, it gets so big that it literally fills up my SSD - I had to cancel when the log file surpassed 25 gigs).
Interestingly, it doesn't seem to be reporting any cycles in public/ or dist/, so I think it might be "partially" working. However, it does still seem to be scanning & processing those excluded paths, so I can't get rid of all the warnings that shouldn't be relevant to this run.
My Kodi is running as root (for better or for worse). This means the user folder is:
/root/.kodi/userdata/guisettings.xml
A quick search for web-related junk:
cat guisettings.xml | grep web
yields
<webserver default="true">false</webserver>
<webserverpassword default="true"></webserverpassword>
<webserverport default="true">8080</webserverport>
<webserverusername default="true">kodi</webserverusername>
<webskin default="true">webinterface.default</webskin>
Looks good to me. I just have to turn on the webserver.
Steps Taken
systemctl stop kodi
perl -i -pe 's/<webserver default="true">false<\/webserver>/<webserver default="true">true<\/webserver>/' /root/.kodi/userdata/guisettings.xml # (I actually used vim)
systemctl start kodi
Guess what happens, the guisettings.xml gets overwritten each time I start Kodi. I also tried adding the following file: /root/.kodi/userdata/advancedsettings.xml with the following contents:
<advancedsettings>
<loglevel hide="attribute">3</loglevel>
<webserver default="true">true</webserver>
<webserverpassword default="true"></webserverpassword>
<webserverport default="true">8080</webserverport>
<webserverusername default="true">kodi</webserverusername>
<webskin default="true">webinterface.default</webskin>
</advancedsettings>
This also does not work.
Are you by any chance trying to enable the web server to allow using Kodi remote?
I encountered the same issue too, "guisettings.xml gets overwritten".
According to kodi.wiki, you need to configure 2 more XML elements.
To be complete, having the following in advancedsettings.xml should help:
<advancedsettings>
<services>
<esallinterfaces>true</esallinterfaces>
<webserver>true</webserver>
<zeroconf>true</zeroconf>
</services>
</advancedsettings>
This is very simple to recreate.
If my script foo.py is:
import scipy
Then run:
python pyinstaller.py --onefile foo.py
When I launch foo.exe I get:
WARNING: file already exists but should not: C:\Users\username\AppData\Local\Temp\_MEI86402\Include\pyconfig.h
I've tested a few versions but the latest I've confirmed is 2.1dev-e958e02 running on Win7, Python 2.7.5 (32 bit), Scipy version 0.12.0
I've submitted a ticket with the Pyinstaller folks but haven't heard anything yet. Any clues how to debug this further?
You can hack the spec file to remove the second instance by adding these lines after a=Analysis:
for d in a.datas:
if 'pyconfig' in d[0]:
a.datas.remove(d)
break
The answer by wtobia# worked for me. See https://github.com/pyinstaller/pyinstaller/issues/783
Go to C:\Python27\Lib\site-packages\PyInstaller\build.py
Find the def append(self, tpl): function.
Change if tpl[2] == "BINARY": to if tpl[2] in ["BINARY", "DATA"]:
Expanding upon Ilya's solution, I think this is a little bit more robust solution to modifying the spec file (again place after the a=Analysis... statement).
a.datas = list({tuple(map(str.upper, t)) for t in a.datas})
I only tested this on a small test program (one with a single import and print statement), but it seems to work. a.datas is a list of tuples of strings which contain the pyconfig.h paths. I convert them all to lowercase and then dedup. I actually found that converting all of them all to lowercase was sufficient to get it to work, which suggests to me that pyinstaller does case-sensitive deduping when it should be case-insensitive on Windows. However, I did the deduping myself for good measure.
I realized that the problem is that Windows is case-insensitive and these 2 statements are source directories are "duplicates:
include\pyconfig.h
Include\pyconfig.h
My solution is to manually tweak the .spec file with after the a=Analysis() call:
import platform
if platform.system().find("Windows")>= 0:
a.datas = [i for i in a.datas if i[0].find('Include') < 0]
This worked in my 2 tests.
A more flexible solution would be to check ALL items for case-insensitive collisions.
I ran the archive_viewer.py utility (from PyInstaller) on one of my own --onefile executables that has the same error and found that pyconfig.h is included twice:
(31374007, 6521, 21529, 1, 'x', 'include\\pyconfig.h'),
(31380528, 6521, 21529, 1, 'x', 'Include\\pyconfig.h'),
(31387049, 984, 2102, 1, 'x', 'pytz\\zoneinfo\\CET'),
Sadly though, I don't know how to fix it.
PyInstaller Manual link:
http://www.pyinstaller.org/export/d3398dd79b68901ae1edd761f3fe0f4ff19cfb1a/project/doc/Manual.html#archiveviewer
I want to be able to debug minified compressed javascript code on my production site. Our site uses django compressor to create minified and compressed js files. I read recently about chrome being able to use source maps to help debug such javascript. However I don't know how/if possible to tell the django compressor to create source maps when compressing the js files
I don't have a good answer regarding outputting separate source map files, however I was able to get inline working.
Prior to adding source maps my settings.py file used the following precompilers
COMPRESS_PRECOMPILERS = (
('text/coffeescript', 'coffee --compile --stdio'),
('text/less', 'lessc {infile} {outfile}'),
('text/x-sass', 'sass {infile} {outfile}'),
('text/x-scss', 'sass --scss {infile} {outfile}'),
('text/stylus', 'stylus < {infile} > {outfile}'),
)
After a quick
$ lessc --help
You find out you can put the less and map files in to the output css file. So my new text/less precompiler entry looks like
('text/less', 'lessc --source-map-less-inline --source-map-map-inline {infile} {outfile}'),
Hope this helps.
Edit: Forgot to add, lessc >= 1.5.0 required for this, to upgrade use
$ [sudo] npm update -g less
While I couldn't get this to work with django-compressor (though it should be possible, I think I just had issues getting the app set up correctly), I was able to get it working with django-assets.
You'll need to add the appropriate command-line argument to the less filter source code as follows:
diff --git a/src/webassets/filter/less.py b/src/webassets/filter/less.py
index eb40658..a75f191 100644
--- a/src/webassets/filter/less.py
+++ b/src/webassets/filter/less.py
## -80,4 +80,4 ## class Less(ExternalTool):
def input(self, in_, out, source_path, **kw):
# Set working directory to the source file so that includes are found
with working_directory(filename=source_path):
- self.subprocess([self.less or 'lessc', '-'], out, in_)
+ self.subprocess([self.less or 'lessc', '--line-numbers=mediaquery', '-'], out, in_)
Aside from that tiny addition:
make sure you've got the node -- not the ruby gem -- less compiler (>=1.3.2 IIRC) available in your path.
turn on the sass source-maps option buried away in chrome's web inspector config pages. (yes, 'sass' not less: less tweaked their debug-info format to match sass's since since sass had already implemented a chrome-compatible mapping and their formats weren't that different to begin with anyway...)
Not out of the box but you can extend a custom filter:
from compressor.filters import CompilerFilter
class UglifyJSFilter(CompilerFilter):
command = "uglifyjs -c -m " /
"--source-map-root={relroot}/ " /
"--source-map-url={name}.map.js" /
"--source-map={relpath}/{name}.map.js -o {output}"
I installed moodle 1.9.12 and now I want to use Algebra notation in content. I enable "TeX Notation" and "Algebra Notation" in administrator panel and also install mimetext and dvips and Imagemagic on the server. fortunately Tex Notation works fine but I got the following error for Algebra:
sh: /var/www/html/moodle/filter/tex/mimetex.linux: not found
The shell command
"/var/www/html/moodle/filter/tex/mimetex.linux" -e "/var/www/moodledata/filter/algebra/de06d6c44d98ba4e42dffca988bf530b.gif" -- '\Large \frac{\sin\left(z\right)}{x^{2}+y^{2}}'
returned status = 127
File size of mimetex executable /var/www/html/moodle/filter/tex/mimetex.linux is 830675
The file permissions are: 100775
The md5 checksum of the file is 56bcc40de905ce92ebd7b083c76e019e
Image not found!
Note: /var/www/html/moodle/filter/tex/mimetex.linux exists on the server and is executable!!!
What is the problem?? Any idea?????
From what you have described, calling the general tex filter debug page works and does not show up the same error.
/filter/tex/texdebug.php works, but /filter/algebra/algebradebug.php does not.
If this is the case, perhaps you could check for an open_basedir, or safe_mode_exec_dir being set to include the current working directory, or otherwise restricting the execution of /var/www/html/moodle/filter/tex/mimetex.linux, while the current working directory is /var/www/html/moodle/filter/algebra.
You could look at this by visiting /admin/phpinfo.php at your site, and look carefully at the effective values of open_basedir, safe_mode and safe_mode_exec_dir.
You could also check the apache error log or add the following lines to the top of the algebra debug php file, and you might see some extra error messages:
$CFG->debug = 6143 ;
$CFG->debugdisplay= 1 ;
Hope that helps