Related
I have a source code of a swift application which developed for iOS using swift 3.
I want to run it inside Xcode however it remains in loading state forever.
I have tried solutions provided in question Xcode freezes on startup while loading project however the situation did not change.
The developer of this source code told me that he used Xcode 9.x to develop application so he suggested me to try a 9.x version of Xcode. I guess Xcode should be backward compatible however I want to know does using Xcode 9.x changes the situation or I should look for reason somewhere else?
Using answer in apple.stackexchange.com did the trick:
Removing the ~/Library/Saved Application
State/com.apple.dt.Xcode.savedState/directory might help.
I tried all the solutions outlined here and none of them worked. However, I managed to fix this issue and here is what worked for me: If you're on an Apple OS and have iCloud sync enabled on your desktop/documents/any folder where you're loading Xcode from, the iCloud sync could be causing this issue.
I installed a fresh copy of my RN project in a directory not synced by iCloud and subsequently the issue was resolved; my build-time was down to a couple of seconds!
rm -rf ~/Library/Developer/xcode
in terminal worked for me, based on this answer
As of July, 2022, nothing else worked for me but, taking my project outside of the iCloud Drive and putting it into a directory without it. As it is mentioned above, iCloud sync interferes with the XCode running and stalls it.
I wasted almost 2 hrs and tried everything on stack over flow
SIMPLE SOLUTION
Just turn OFF icloud from your mac os so that it it will not sync the project.
To turn off icloud
Go to setting
Icloud
turn off sync
Thats all enjoy
I tried to delete:
~/Library/Developer/Caches/com.apple.dt.Xcode
~/Library/Developer/Xcode/DerivedData
~/Library/Developer/Saved Application State/com.apple.dt.Xcode.savedState
~/workspace/MyProject.xcodeproj/project.xcworkspace/xcuserdata
and once it helped. But another time it didn't help, so I also tried to reinstall Xcode, which also didn't help.
It turned out that the problem was that I was installing the app via WiFi or Bluetooth. When I connected my device via cable, the Xcode popped up to life and the "loading forever" stopped.
My xcode got hang when I force quit it. After that it was showing only "loading".
Here is fix to start xcode from beginning.
cd /
cd Applications
cd Xcode.app
cd Contents/MacOS
sudo ./Xcode
it will open xcode default window to open a new project.
Closed. This question is not about programming or software development. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 months ago.
Improve this question
I was trying to install my iphone application from testflight.
It installs perfectly on few devices but in some after installing about 80 percent it gives an error Unable to download application, <my app> could not be installed at this time
I am able to find out the reason for, why is it so?
Here's a screenshot:
clear your cache and cookies in Safari, make sure your device is in provisioning profile and provisioning profile is installed on the device.
If everything mentioned above didn't help, try to create a new build with higher build number and try to distribute your app again
Most common issues that cause this are (from testflight's website):
Device storage is full
The provisioning profile is a developer provisioning profile
The ad hoc distribution provisioning profile is corrupted and the device is having an issue with it.
The device was restored from a backup and is causing a conflict for over-the-air distribution
There was a network timeout
Architecture settings of the build and the device are incompatible ( can sometimes happen -when "Build Active Architecture Only" is on when building).
Not Using Mobile Safari.
for me it turned out that my client's ipad was running iOS 4.2.2 and my project supports 5.0+.
Recently default Xcode project settings set ONLY_ACTIVE_ARCH (Build Active Architecture Only) to yes for Debug configuration.
So your build can not be installed on different hardware than the one you use for development.
Change this setting and installation should go fine.
As for Xcode 5.1, the problem was in arm64 architecture in VALID_ARCHS. Building the release configuration for 5.0 device locally gives the following error:
Xcode cannot install or launch applications supporting the 64-bit architecture on devices running iOS versions prior to 6.0. This configuration is supported for distribution through the iOS App Store, but cannot be used during development with Xcode. To continue, edit the Run scheme action and select a build configuration that does not include the 64-bit architecture.
Removing arm64 from VALID_ARCHS solves the issue. In my case I had to create a separate branch for testing on iOS 5 devices.
You can try to publish the application by changing the version of the build.
I was also having the same problem and tried the same by just changing tIt may help you too.
For me Setting Build Active Architecture to NO... works and installed successfully
Watch the console through the Xcode Organiser for the device that is failing to install.
You'll get a helpful message from the system telling you what is wrong. There are lots of potential failure reasons, so unless you check the message, you're just guessing...
Here is what worked for me:
Clear the Cache and Cookies (Settings > Safari).
Remove existing profile (if any) linked to "Test Flight App" (Settings > General > Profiles).
Open Safari and go to https://testflightapp.com/. Login and follow the steps to start over.
P.S. I used to have a Test Flight App, but it looks like it crashed and the icon turned to be all white. Restarting my iPhone made it reappear correctly.
I was also having this problem, with an Ad-Hoc iPad application, when trying
to install it on a iOS 6 device.
What fixed it for me was to click on the project in XCode, and change the
"iOS Deployment Target" setting from 5.1 to 6.0.
And there was silly me thinking that iOS 5.1 apps would run on a iOS 6.0 device.
I just saw this as a result of a network error / time-out on a flaky network. I could see the progress bar increasing after I got the bright idea of just retrying. Also saw HTTP Range requests on the download server with ever increasing offsets of a few megabytes (the entire app was about 44MB).
I had this problem but I fixed this by making sure my Code Signing Identity is the SAME as the one I used in test flight.
After that, everything works fine
This can also happen if you disable cellular data for "App Store" (for example, while on vacation) and forget to turn it back on. The solution here is to simply re-enable it in Settings -> Cellular.
in my case app want to use iCloud services, but in distr. provision profile wasn't set iCloud enabled. turn it on and refresh profile.
I have had the same issue after fiddling around with certificates (argh).
The problem became apparent as I followed the comment of #Duraiamuthan.H, I installed on a device. The device reported 0xe8008016 (Entitlements) see SO here
The initial reason was, that the testflight target used the App store distribution certificate, not the Team certificate. I fixed that and the application was installing on the device over Xcode and then it also worked with testflight.
I had similar issue. However, I was able to fix it when I updated my iPad timings to that of current. I just checked the device log and found that the time in the log was shown 2 years before.
Hope updating the device timing to the current time will fix the issue.
Missing icon could be a problem. My manifest file points to a non-existing image and it fails the installation process. Placing an icon at the corresponding path solved the issue for me.
I ended up creating new Provisioning profiles, not sure if it was because of:
"The ad hoc distribution provisioning profile is corrupted and the device is having an issue with it."
I had the same problem as #mohitum007. In my case the developer of this App included an expiry date in it.
As workaround I set the date backwards to a past date (e.g. last month). Then I could install it and use it.
Also when I set the date back to normal, the already installed App didn't start up anymore. I contacted the company of this App to send me an updated version.
Sidenote: I found out that users from other Apps had the same problem but reversed: it won't install or start before a certain date.
For me, just uninstall the Testflight and restart my iphone. After that, install TestFlight, it works fine !
Check if the deployment target in the General section of the project settings, is greater than that of your device's iOS version.
If yes then you need to update the version of your device to at least the deployment target version. in order for you to be able to install the application on your device.
I'm testing a Trigger.IO app built with Forge v1.4 on an iPod running iOS 6. I've been installing the .ipa through a distribution provision profile.
Occasionally, after installing an updated version, the app would launch but not run correctly. I traced this behaviour to the window.forge being absent, presumably due to a bad initialization. I would then make sure to kill the app process before installing updates and my recollection is that this seemed to make the problem go away.
Now, I've added the Facebook and Splash modules and my app now consistently won't go past the splash screen after I install an upgraded version unless I forcibly uninstall the old version first. Presumably, it dies before creating the webview. Any idea why I would need to uninstall my app first before upgrading? Is this a known behaviour?
I want to make sure that my users don't experience this when upgrading.
My app runs happily without Forge, and doesn't have any particular dependencies on localStorage data. I don't have a Mac and have been installing via iTunes in Windows, so I don't think I can access logging information.
You should have a look at this post:
How application get update from apple store?
The quick answer is when you update an app, you install the new bundle but you keep the user data stored previously such as a local DB. If you changed the local DB in the new app (or anything else) your app can crash when updated but is fine when downloaded from scratch.
I am trying to simulate an upgrade from version 2.0 to 2.1. I have version 2.0 hosted in testflight, so I did install it in my device. Then I tried running the app from xcode. However what happened is that the app did not get overlapped, instead it created two apps with the same name. How can I make it such that when I run the app from xcode it overlays the old version?
I've made sure that the bundle identifier is the same.
Well the info you can get while updating can be found # this link here.
when user updates an app, Documents folder is stored as is, including
NSUserDefaults (but, sometimes user download app via iTunes and
replace the whole application, crying 'OMG! update killed all my
levels progress!'); Application bundle is erased and replaced by new
one (anyway, it is readonly for user); Re-deployment of new build
version will be enough;
You can't access the appstore inside the simulator because: # link here
It's a simulator not an emulator. Even if there was an App Store in
the Simulator, none of the apps in the store would work since they are
compiled for ARM CPUs while the Simulator runs x86 code.
Another stack overflow # link here states:
Build and install your old version, generate some data, and then
install the new version on top of it.
For testing before submitting to the Appstore I generally download
from the AppStore again the old version, and then install with Xcode
the newer version - for your next update... ;-)
And another stack overflow (that I lost the link for) states:
No, the simulator runs i386 binaries and iPhone appstore apps are ARM
binaries apps.
iOS apps are compiled to machine code, Android apps are run in a
Virtual Machine using byte code and are translated to machine code at
the time they are run.
So no, I don't believe you can run it in the simulator, how ever you can have older projects saved on the iPhone and test both out. And the apple documentation is # this link here.
Read this: https://developer.apple.com/library/ios/technotes/tn2285/_index.html
You cannot simulate update in XCode (neither in simulator or connected device). You have to create IPA file and simulate update process via iTunes.
I just switched from Xcode 3 to 4. When I attempt to upload an app that I have archived to the organizer, I receive this error:
The archive is invalid.
/var/folders/.../app.ipa does not
exist.
This happens after I log in to itunes connect, select the application to update and select next. I am not sure where to begin trying to figure out what is causing this error. Please let me know if I am leaving out anything that would be useful for diagnosing. Thanks
I just faced this problem myself, and I seem to have found a solution to it.
Even though the correct provisioning profile seems to be selected, it might not be.
Try to manually navigate the list of possible provisioning profiles and select the correct one. Do not leave the setting on automatic selection.
In the "Identity:"-list, make sure it does not say "Currently matches...". Manually select the correct one yourself.
That should fix the problem and you should be able to upload to the AppStore.
Okay, so when you install the Xcode 4 package, make sure you have the "Unix Tools" option selected. This was the problem in my case.
If you are running an Xcode beta version (Apple calls it a "developer preview") you will get this error because you're not allowed to submit apps from a beta version. This restriction is not mentioned in the Read Me file or on the Xcode download page. To submit an app, you will need to uninstall Developer Tools, then reinstall the latest non-beta version, then restart your computer.
Here's the command-line command to uninstall:
sudo /Developer/Library/uninstall-devtools --mode=all
Quit Xcode
With a text editor open the file YourProject.xcodeproj/project.pbxproj
Delete all lines containing PROVISIONING_FILE =
Delete all lines containing CODE_SIGN_IDENTITY =
Save & close project.pbxproj
Reopen your project in Xcode
Clean the project
In the Build Settings pane choose the correct code signing identity
Rebuild
I recently switched to a new MacBook Pro and had XCode 4 installed from a Time Machine drive via the Migration Assistant.
Re-installing XCode 4 with the Unix Tools fixed it.
For some reason those files weren't getting copied across with Migration Assistant.
I had the same issue for both TestFlight and App Store. The solution for me was to archive the app, and in the organizer select "Don't sign" when you try to validate/submit or share (in the case of TestFlight).
Hope this helps.
In my case this has nothing to do with Xcode or the unix tools. Indeed I happend to had too many distribution certificates (Why? I don't know). Deleted all of them but one, code sign with this one, re code sign it while validating and submit it with no errors. I hop this help.
A good way to test is to run the build from the command line. Change to your project folder and run 'xcodebuild' and look carefully at the outputs, especially around the 'codesign' command.
I did this and discovered the following:
architecture armv7 object: /Users/chris/Documents/x/x/build/Release-iphoneos/x.app/x malformed object
object file format invalid or unsuitable
So it isn't a solution, but it at least lets you zero in on what the problem is. Anyway, for me, looks like an architecture config error.
Update - to fix this problem, i replaced the copy of codesign_allocate in my /usr/bin folder with the one in /Developer/somewhere and that fixed it.
I tried most of the ideas above, and they did not work for me, likely because I am using he Appcelerator Titanium platform. I did however delete the Build directory and re-built the product and it passed the validation and I was able to upload the binary to the app store.
The same happened to me. My mistake was I had certificates with similar names (like "Provisioning Profile of Giammy", "Profile for Provisioning of Giammy"...).
Running "Archive" from XCode 4.0 and then "Validate..." from the Organizer I faced the "app.ipa does not exist" issue. The problem was that I selected the wrong certificate from those with similar names. The "Archive" phase worked good but the archive did not pass the validation.
Solution: just picked up the correct provisioning profile in the "Archive" phase.
Lesson learned: check twice the provisioning profile name!
Make sure that you are signing with keys for correct product/bundle ID. If I remember correctly, mixing that up could lead in archiving problems.
Also, go to that temp folder and check what IS created. Maybe xCode is creating the IPA under a different name, that could give you a hint.
I solved this same problem by deleting all of the expired signing certificates from my Keychain. Xcode seems to just grab the first one it finds with the given name, regardless of whether it's still valid.
I tried everything including reinstalling xcode4 with unix tools. NOthing works.
I assume I shouldnt have to do this as I'm able to submit other apps without issues.
I'm just having this issue with a partiular project (coming from xcode3).
I even created a project from scratch, imported all the code over and tried again - failed.
so it's not only my project but something in it.
So I've started the process of creating a new project, adding some files, then submitting, then rejecting to figure out what's causing it. This is working so far.
update: ok - it has something to do with using CorePlot and linking it in as a library. and voila - found the answer here.
Can't submit app with CorePlot using Xcode4
Solution: when submitting select "Don't resign"
I was not able to solve this problem by changing or fixing code signing identities (which should resolve this problem in many cases. Nor did simply reinstalling Xcode. These are the top two solutions as I post this answer.
I found success in uninstalling all the developer tools, and reinstalling from scratch.
Here is how I solved it:
Open Keychain and delete all distribution certificates, both from my "login" and from "system".
Download the latest Distribution certificate from the Dev Center.
Double click the certificate to install on Keychain.
On XCode, make sure the certificate name matches on Build Settings.
Build for Archive (a Keychain popup should ask for permission to sign the app).
Archive (again, Keychain confirmation required).
Validate archived app (again, Keychain confirmation will be required).
Submit app (one more time, Keychain confirmation will be required).
If you are building for Archive and you don't see any Keychain confirmation dialog, you can stop at that point because submission is not going to work.
i did have this very same issue using xcode_4.2_and_ios_sdk_5_beta__snow_leopard, my working solution.
Install the previous (non-beta) version of Xcode in a different location and work with that version, and that's it, it worked i was able to upload my app to the AppStore without any inconvenience.
regards,
Jorge.
Never try to submit using apps you built using beta SDKs as your base SDK.
I got rid of this problem by uninstalling all developer tools with the below command
sudo /Developer/Library/uninstall-devtools --mode=all
and then restarted my system and installed that latest non-beta version of XCode and non-beta iOS SDK.
Have you been playing around with the ENTITLEMENTS_REQUIRED attribute at /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.3.sdk/SDKSettings.plist (let say to create jailbroken applications)?
In this case, please reset ENTITLEMENTS_REQUIRED to YES.
for xcode 4 I tried every thing but I can t solve this error until
install xcode 4.2 for snowleopart
if you cant see your app icon in validation page its can be your xcode have error.
download from apple developer page xcode 4.2 and install. its solved.
you dont need to uninstall your xcode 4 just download new xcode 4.2 and install.
I am very fine now
My solution was:
Open the info.plist file in your project and in product name write your products name instead of $[PRODUCT_NAME]
Had this error in Xcode, but had no such error when using the Application Loader. Get to it via Xcode -> Open Developer Tool -> Application Loader. Very frustrating indeed.