As of IPhone OS 3.0, MotionX GPS is able to keep recording a GPS track while in sleep mode. After you push the sleep button on top of the phone, the app continues receiving GPS coordinates and recording them. Does anyone know how they're able to do this? I'm only aware of the method to keep running audio while in sleep mode.
I found a great webpage that explains how to do it -
Cached link from Wayback machine
Original Link, now 404
You have to start a timer that plays a sound every 10 seconds. But the sound can be silent.
[UIApplication sharedApplication].idleTimerDisabled=YES should do it
I heard that the [UIApplication sharedApplication].idleTimerDisabled=YES will leave the screen's background light on, (after the user pressed the sleep button,) which will drain the battery.
But I have not tried this myself, so anybody with experiences correct this if it is wrong.
Related
Well I am having two issues that i can't get to work, related to audio and calls.
The first one is to play a sound during a phone call. I don't want to play continuous music or stream anything, it is just a simple and short sound that the user will hear at one time during his call.
I have read some posts claiming that this is possible, and I even have an application that does so, but I can't get it to work. My app identifies the call using CTCallCenter and print the logs but never plays the sound or plays it after the app comes to foreground again. I have the .plist property of required background mode App plays audio.
The second issue, is to play the sound after some elapsed time. NSTimers doesn't work when on background mode, nor NSThread sleep on my background process or NSOperation. So how could I play this sound after say 10 seconds of the call?
Also, this behavior has to work also when the application is already on background mode. With CTCallCenter I am only getting the event when the application is interrupted from use, but I don't see any logs when i send the app to background and then begin/receive a call
.
If anyone could point me to the right direction I'll be really grateful.
I havent done this, but NSLocalNotifcation, schedule a notification to play when you app get the call to move into the background. I would expect this to work. Interested to find out if it does.
I am writing a music player that I am trying to allow to go to sleep mode. The problem is, every second, the ui is updated and I think that is preventing the phone from sleep. I added this line:
[UIApplication sharedApplication].idleTimerDisabled = NO;
and it did nothing. I have seen other apps that go to sleep mode even if the ui is being updated. How can I accomplish this?
Based on the comments, Are you running your app while attached to Xcode? By default Xcode stops the device going to sleep. If so, just disconnect and run, it should go to sleep (provided your devices sleep timer is not too much)
I'm trying to build an alarm app that can fire an alarm while in locked-screen mode (the app is in the foreground, but the screen is locked). The alarm has to be triggered by a NSTimer not by uilocalnotification.
In iOS 4 I used the 'play silent sound every 10 seconds' hack to prevent the app from going to deep sleep and the timer events worked fine. However, in iOS 5 this doesn't seem to work.
Any ideas? Or this should work and I'm doing something wrong?
It seems that you actually can use the 'play silent audio' hack in iOS 5, but the audio has to be audible meaning you can't play it at volume set to 0.0.
You can use github.com/marcop/iPhoneInsomnia and set the volume to greater than 0, but it still doesn't work because the sound file is so short that the system kills your application before the timer is triggered and replays the sound. I solved this by setting the numberOfLoops of the audioPlayer to -1 (infinite repeat). Then it should work.
And you should also set the UIBackgroundMode plist key to an array of one string called "audio"
It's probably a dirty workaround, but in the past I have used the proximity sensor to turn off the screen instead of locking the phone. Simply place the phone upside down and the screen will turn itself off.
[[UIDevice currentDevice] setProximityMonitoringEnabled:YES];
This will allow you to retain full control over the device, while the screen does turn off.
I have developed an iPhone app which gets the microphone recorder inputs every second using NSTimer, calculate the amplitude of sound, and take appropriate action if required. I have noticed that when my iPhone gets locked, my application stops running(it doesn't fire the timer callback function). When I unlock iPhone, it start automatically. Could anyone please tell me how can I allow application responding when iPhone gets locked? Is there any other way around such that iPhone shouldn't get locked when my application is running? What should be Apple's recomendation on this?
I found this article but not sure it is correct way to do.
Thanks.
You cannot prevent timer from being stopped when application goes into idle state. Only one possible way is to disable idleTimer of the application.
application.idleTimerDisabled = TRUE;
//or
//Disable screen dimming if no user input occur on device.
[[UIApplication sharedApplication] setIdleTimerDisabled:YES];
I have used:
[UIApplication sharedApplication].idleTimerDisabled = YES;
in a number of Apps developed and running under iPhone OS 2.x and never had any problems with it. They were clock apps so needed to run constantly and ignore the iPhone's idle Timer setting.
However, trying to achieve the same with a new App running OS 3.0 (and which needs to be deployed under 3.0 as it uses some 3.0 APIs) I've found the idle Timer to be either ignored or inconsistent.
My App plays music from the iPod library and when the music is playing it auto-locks regardless of the above setting. But once you unlock it, it then doesn't auto-lock again unless you play music again, in which case it locks again after the iPhone auto-lock time setting.
I'm amazed no-one else has come across this as I imagine it would affect a large number of Apps.
Just to clarify:
1. The above code is in ApplicationDidFinishLaunching
2. I know that the phone won't auto-lock when testing from xCode regardless of settings
If anyone has any thoughts I'd be very grateful...
Our app uses the MPMediaPLayer. We also had the idleTimerDisabled=YES code in the ApplicationFinishedLaunching, which works EXCEPT if untethered, and there is already a current nowPlayingItem which is left playing (or unpaused, if paused at app startup). Obviously this is all with the Settings -> General -> Autolock set to some timed value.
By adding idleTimerDisabled=NO, immedately followed by idleTimerDisabled=YES in one of the other bits of code AFTER we had figured out what bit of music we would get playing seemed to solve the problem. Just setting it to YES was insufficient.. and subsequent queries had always indicated the correct value (YES).. so it appears the Apple code ignores the setting of the value IF there is a current piece of music and that is not changed by your code.. but does notice a change of value.
This is all under iOS 3.0.
Even in 2015, using iOS 8.2, this bug is still alive and kicking.
Here's my solution, using XCode 6.2.
iPhone - phone goes to sleep even if idleTimerDisabled is YES
Basically, even now, in 2015, the only way to safely make sure that the device doesn't go to sleep is to repeatedly call a piece of code to keep the device awake.
-(void)callEveryTwentySeconds
{
// DON'T let the device go to sleep during our sync
[[UIApplication sharedApplication] setIdleTimerDisabled:NO];
[[UIApplication sharedApplication] setIdleTimerDisabled:YES];
}
Sounds like a bug, file with Radar - I am not too surprised this has not been seen much as there are probably not a lot of apps that try to lock the screen open and play music.
Having same issue. It does work when the device is plugged in. You can press lock button on top, and my NSTimer fires later and causes a vibrate. However if the device is not plugged in pressing the lock button puts the device to sleep. Any solution would be greatly appreciated.
iCodeblog posted about the idletimer, I said it didn't work, and the person who develops 'cute clock' was nice enough to reply. You have to do a hack, play a 1 second or longer silent sound every 10 or so seconds with NSTimer. This keeps the device awake even if the user hits the lock button.
I develop Seconds - Interval Timer for iPhone and iPod touch and I've had no end of trouble with this. The idea of my app is that people create timers based on a number of intervals where each interval can have it's own playlist or track played.
In iOS3 I had the problem that I couldn't disable the idle timer by just setting idleTimerDisabled = YES. In the end I came up with the same solution as Neil whereby I would periodically set it to NO, then immediately to YES again. This seemed to work.
I'm now updating the app to iOS4 (I know, iOS5 is just around the corner...) and now I have the opposite problem. If the MPMediaPlayer changes track before the idle timer reaches it's limit it gets reset. I've just tested this by creating an interval in my app that was 55 seconds, my auto-lock was set to a minute. At 50 seconds the screen dimmed as it prepared to lock, but at 55 seconds when the music changed it went back to full brightness and then didn't lock as it should.
Overall, the implementation of this seems flakey at best.