I cannot understanding why values assign to array objects become "disordered" after executing executeFetchRequest. Well, I'm not certain that fetching is the problem here. Here's the code.
objects=[NSArray arrayWithObjects:#"a",#"b",#"c",#"d",#"e",nil];
NSManagedObject *DB = nil;
for (int i=0;i<[objects count];i++){
DB = [NSEntityDescription
insertNewObjectForEntityForName:#"dbTable"
inManagedObjectContext:context];
[DB setValue:[objects objectAtIndex:i] forKey:#"item"];
[DB setValue:[NSString stringWithFormat:#"%3.2f", 0] forKey:#"value"];
}
objects = [context executeFetchRequest:request error:&error];
Printings
new wrong ordering after fetch execution into array objects
index 0 :: Item: d
index 1 :: Item: c
index 2 :: Item: e
index 3 :: Item: b
index 4 :: Item: a
thank you.
Due to the underlying database architecture, Core Data stores all objects and to-many references in an unordered fashion. The order you get back from a fetch request is not guaranteed, unless you apply an NSSortDescriptor, as Alex describes. This thread in the Cocoa mailing list details the issues involved, as well as some potential solutions.
These solutions include having an index property that you sort on when performing a fetch request, or implementing a linked list of managed objects and traversing that in order. Brian Webster has created a subclass of NSManagedObject that lets you maintain ordered to-many relationships in your Core Data objects, for which the source code can be found here.
Apply an NSSortDescriptor to your fetch request, e.g.:
NSSortDescriptor *itemDescriptor = [[NSSortDescriptor alloc] initWithKey:#"item" ascending:YES];
NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:itemDescriptor, nil];
[fetchRequest setSortDescriptors:sortDescriptors];
[sortDescriptors release];
[itemDescriptor release];
will sort on the item name. You could use value, instead.
When you execute a fetch request without specifying that you want your items sorted by a specific key, you get a result array which is not ordered. You can extend your fetch request with a sort descriptor using a code snippet such as the following one.
// Edit the sort key as appropriate.
NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:#"value" ascending:YES selector:#selector(caseInsensitiveCompare:)];
NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil];
[fetchRequest setSortDescriptors:sortDescriptors];
[sortDescriptor release];
[sortDescriptors release];
Related
I've got a column with integer values in CoreData. While retrieving results from it, I want the column values to be subtracted with a number.
Something like: columnValue - someNumber (this number is entered by user)
I know I may have to use NSPredicate for this, but am unaware if there's a function or syntax for it.
The alternate right now I have is to iterate all column values and subtract with 'someNumber'. But I think there should be a better and efficient way to do this.
Edit: Code from #salo.dm 's answer
- (NSDictionary *)myFetchResults {
//Predicate works fine
NSPredicate *predicate = [NSCompoundPredicate andPredicateWithSubpredicates:[NSArray arrayWithObjects:pred1, pred2, nil]];
/*Sort Descroptor - Sorting by 4 columns*/
NSSortDescriptor *sortDesc1 = [NSSortDescriptor sortDescriptorWithKey:#"Column1" ascending:YES];
NSSortDescriptor *sortDesc2 = [NSSortDescriptor sortDescriptorWithKey:#"Column2" ascending:YES];
NSSortDescriptor *sortDesc3 = [NSSortDescriptor sortDescriptorWithKey:#"Column3" ascending:YES];
NSSortDescriptor *sortDesc4 = [NSSortDescriptor sortDescriptorWithKey:#"Column4" ascending:YES];
/*Get Data*/
MyAppDelegate *appDelegate = [[UIApplication sharedApplication] delegate];
NSManagedObjectContext *context = [appDelegate managedObjectContext];
NSEntityDescription *entity = [NSEntityDescription entityForName:#"TableName" inManagedObjectContext:context];
NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init];
[fetchRequest setEntity:entity];
[fetchRequest setPredicate:predicate];
[fetchRequest setSortDescriptors:[NSArray arrayWithObjects:sortDesc1, sortDesc2, sortDesc3, sortDesc4, nil]];
NSArray *listData = [context executeFetchRequest:fetchRequest error:nil];
/*Create subtract expression*/
NSExpressionDescription *subExp1 = [[NSExpressionDescription alloc] init];
[subExpLatitude setName:#"subtraction1"];
[subExpLatitude setExpression:[NSExpression expressionForFunction:#"from:subtract:"
arguments:[NSArray arrayWithObjects:
[NSExpression expressionForKeyPath:#"Column3"],
[NSExpression expressionForConstantValue:[NSNumber numberWithDouble:someNumber1]],
nil]]];
[subExp1 setExpressionResultType:NSDoubleAttributeType];
NSExpressionDescription *subExp2 = [[NSExpressionDescription alloc] init];
[subExpLongitude setName:#"subtraction2"];
[subExpLongitude setExpression:[NSExpression expressionForFunction:#"from:subtract:"
arguments:[NSArray arrayWithObjects:
[NSExpression expressionForKeyPath:#"Column4"],
[NSExpression expressionForConstantValue:[NSNumber numberWithDouble:someNumber2]],
nil]]];
[subExp2 setExpressionResultType:NSDoubleAttributeType];
/*Get difference data*/
[fetchRequest setResultType:NSDictionaryResultType];
[fetchRequest setPropertiesToFetch:[NSArray arrayWithObjects:subExp1, subExp2, nil]];
NSArray *listDifference = [context executeFetchRequest:fetchRequest error:nil];
NSLog(#"Subtraction 1: %#", [[listDifference objectAtIndex:0] objectForKey:#"subtraction1"]);
NSLog(#"Subtraction 2: %#", [[listDifference objectAtIndex:0] objectForKey:#"subtraction2"]);
NSMutableDictionary *dictResult;
[dictResult setObject:listData forKey:#"Data"]
[dictResult setObject:listDifference forKey:#"Difference"]
return dictResult;
}
Edit: Get coredata object
This doesn't work.
NSExpressionDescription *expEntity = [[NSExpressionDescription alloc] init];
[expEntity setName:#"TableNameEntity"];
[expEntity setExpression:[NSExpression expressionForKeyPath:#"objectID"]]; //Searches for a column for the name specified
[expEntity setExpressionResultType:NSObjectIDAttributeType];}
Had to change it to below to get it working (Assuming this is the correct way)
NSExpressionDescription *expEntity = [[NSExpressionDescription alloc] init];
[expEntity setName:#"TableNameEntity"];
[expEntity setExpression:[NSExpression expressionForEvaluatedObject]];
[expEntity setExpressionResultType:NSObjectIDAttributeType];
I added expEntity to the setPropertiesToFetch list. Now I get two values in the dictionary.
{
TableNameEntity = "0x5e22120 <x-coredata://1A659A52-9321-4ACD-992B-04F20E7BDCED/TableNameEntity/p1640>";
subtractionValue = "-24.13";
}
When I try to retrieve and access TableNameEntity from the dictionary, the app crashes.
TableNameEntity *tableEntity = (TableNameEntity *)[dict objectForKey:#"TableNameEntity"];
tableEntity.column1 //This is not the exact code. But this operation crashes with error
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[_NSObjectID_48_0 column1]: unrecognized selector sent to instance 0x5e22120'
Here if you notice, the value for key TableNameEntity is contained in quotes, so I guess its being returned as a string.
See if you can correct what I've done wrong.
I've tried an alternate to get columns values in the dictionary. Here it is (this works fine). But I guess its not a good approach.
[fetchRequest setPropertiesToFetch:[NSArray arrayWithObjects:subExp1, #"column1", #"column2", ... #"columnN" nil]];
You could make the calculation in a fetch request as follows:
- (NSArray *)myFetchResults
{
NSFetchRequest *request = [[NSFetchRequest alloc] init];
request.entity = [NSEntityDescription entityForName:#"myEntity" inManagedObjectContext:myContext];
request.resultType = NSDictionaryResultType;
NSExpressionDescription *subExDescr = [[NSExpressionDescription alloc] init];
[subExDescr setName:#"subtraction"];
[subExDescr setExpression:[NSExpression expressionForFunction:#"subtract:from:"
arguments:[NSArray arrayWithObjects:
[NSExpression expressionForConstantValue:[NSNumber numberWithInt:someNumber]],
[NSExpression expressionForKeyPath:#"myAttribute"],
nil]]];
[subExDescr setExpressionResultType:NSInteger64AttributeType];
request.propertiesToFetch = [NSArray arrayWithObject:subExDescr, nil];
NSError *err = nil;
NSArray *results = [self.moContext executeFetchRequest:request error:&err];
[request release];
[err release];
return results;
}
The fetch results will be an array of dictionaries. You can access the result for the nth value in the column as follows:
NSArray *results = [self myFetchResults];
NSDictionary *nthDict = [results objectAtIndex:n];
NSInteger nthValue = [nthDict objectForKey:#"subtraction"];
Note that this code is untested. As is, I believe it will operate on all items in the column. If you want to operate only on selected items, you can add a predicate to select the items you want to operate on.
You could also look up the documentation for NSExpression and build all sorts of different operations. The class is a bit dense, but the Apple documentation has some snippets of code that help to understand how to use it. And I hope the above example illustrates how to incorporate it into a fetch request.
EDIT: CORRECTION
The entity, of course, has to be specified in the fetch request. I had initially left that out, but have now corrected the code.
EDIT: RESPONSE TO COMMENT
I'm not sure I understand what you're asking, but this may be it. You can create expression descriptions as follows:
NSExpressionDescription *expLatitude = [[NSExpressionDescription alloc] init];
[expLatitude setName:#"latitude"];
[expLatitude setExpression:[NSExpression expressionForKeyPath:#"Column3"]];
[expLatitude setExpressionResultType:NSDoubleAttributeType];
NSExpressionDescription *expEntity = [[NSExpressionDescription alloc] init];
[expEntity setName:#"TableNameEntity"];
[expEntity setExpression:[NSExpression expressionForKeyPath:#"objectID"]];
[expEntity setExpressionResultType:NSObjectIDAttributeType];}
Then, you add them to the propertiesToFetch array, as two more objects. Each dictionary in the fetch results will now have the latitude, the subtraction resulting from that same latitude, and the corresponding objectID of the entity that contained that latitude. The dictionaries will be ordered in the results array according to your sort descriptors. (I haven't tried the objectID expression, but I think it should work fine.)
Basically, your results are ordered in the exact same order as a traditional fetch request with the same predicate and the same sort descriptors, that is, for a fetch request with the default result type NSManagedObjectResultType.
I hope this answers your question. If not, don't hesitate to ask again. But, I may take a while to answer because it's sleep time for me now.
EDIT: RESPONSE TO 'GET COREDATA OBJECT'
Good catch on finding the correct expression to get the object ID! (Seeing it, the expression I offered for this now looks obviously wrong.)
As to the exception you're getting, it makes sense. The value returned in the fetch results is not the managed object itself, it's only the managed object's ID. To access the managed object, I think the following should work:
NSManagedObjectID *myObjectID = [dict objectForKey:#"TableNameEntity"];
TableNameEntity *tableEntity = (TableNameEntity *)[context objectWithID:myObjectID];
tableEntity.column1
The context above is the NSManagedObjectContext.
However, I think I prefer your final solution. I didn't know you could combine NSExpressionDescriptions with properties in the propertiesToFetch array. Good to know!
More importantly, it may be faster to get all the properties you need in the fetch than to get only the objectID from the fetch and get the properties later. Getting the objectID generally does not fire the fault for the entity. I believe the fault will be fired later, when you access the properties. It will fire once, when accessing the first property, or multiple times, once for each property. (I'm not sure which.) [For an explanation of faulting, see Firing Faults.]
My recommendation is that including all the properties you need in propertiesToFetch is the best approach. (You may try getting the objectID, if you prefer. But, if you find it's slow, you can go back to getting all the properties in the fetch.)
Fetch requests and expressions are poorly documented. You have to play with them a bit to get the syntax right. You seem to be doing very well.
I have an app that fetches data (a list of countries) from an sqlite database.
The countries are in German and contain umlauts, for example Österreich. I want to fetch those countries sorted by name and would expect Österreich to be near other countries with "O", but it is at the end of the results instead.
This code is used to fetch the sorted countries:
NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init];
[fetchRequest setEntity: [NSEntityDescription entityForName: #"Continent" inManagedObjectContext: moc]];
[fetchRequest setSortDescriptors: [NSArray arrayWithObject: [[[NSSortDescriptor alloc] initWithKey: #"name" ascending: YES] autorelease]]];
NSError *error = nil;
NSArray *result = [moc executeFetchRequest: fetchRequest error: &error];
Is there any way to have those special char names appear at the position I described above? Didn't find anything on the internet on this ...
Thanks a lot.
Thanks for your answers, I could solve the problem another (easy) way!
I just had to modify the NSSortDescriptor like this:
[NSSortDescriptor sortDescriptorWithKey: #"name" ascending: YES selector: #selector(localizedCompare:)]
You should use UILocalizedIndexedCollation for doing sorting and categorizing entries into sections. The code for implementing this is in the question NSFetchedResultsController v.s. UILocalizedIndexedCollation
The UILocalizedIndexedCollation was built to be able to on a per-language basis categorize words based on the current language settings. Á and à will be put in section A.
I have implement a UItable with data sourced via Core Data. The table works fine and presents the data correctly, drills down.. etc.
However, it has the following problem: it presents the content data in a different order every time. I would like it at least to appear consistently or even better alphabetically.
Any ideas on why this might be happening or a specific property or method I should be reviewing in the docuemntation?
Help much appreciated
You need to set an NSSortDescriptor on your NSFetchRequest
NSSortDescriptor *sortDescriptorName = [[NSSortDescriptor alloc] initWithKey:#"name" ascending:YES selector:#selector(caseInsensitiveCompare:)];
[fetchRequest setSortDescriptors:[NSArray arrayWithObject:sortDescriptorName]];
Then create your NSFetchedResultsController with the fetchRequest object.
This would cause your list to appear sorted alphabetically using the property "name" and ignore case while sorting.
You can simply add a sort descriptor to the request. In this example, the data object has a numeric column for "sortOrder", but you could sort on most anything.
- (NSMutableArray *)loadData {
NSManagedObjectContext *context = [self managedObjectContext];
NSFetchRequest *request = [[NSFetchRequest alloc] init];
NSEntityDescription *entity = [NSEntityDescription entityForName:#"NameOfEntity" inManagedObjectContext:context];
[request setEntity:entity];
NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:#"sortOrder" ascending:YES];
NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil];
[request setSortDescriptors:sortDescriptors];
[sortDescriptors release];
[sortDescriptor release];
NSError *error = nil;
NSMutableArray *mutableFetchResults = [[context executeFetchRequest:request error:&error] mutableCopy];
if (mutableFetchResults == nil) {
// Handle the error.
}
[request release];
return [mutableFetchResults autorelease];
}
I have not done much with CoreData other than to read about it and review some examples, but I would say this:
It sounds like your data is simply coming out of CoreData unsorted, and the order is in fact not guaranteed UNLESS you provide some additional hint about how you would like it sorted, with say a sort descriptor or something.
Sorry I can't provide a concrete reference, but there has to be a way to both fetch data and specify the order in which it is returned.
Alternatively, you could (behind the scenes) fetch all the table data from CoreData and then sort it yourself, but I think that defeats the purpose of using CoreData in the first place and discards a lot of the functionality of CoreData that is likely more efficient than anything you could write yourself to massage the data.
I'm trying to use the NSFetchedResultsController in my app, but have a problem to sort my data. I get the following error when trying to sort the result using a relationship that is two levels down from the entity:
* Terminating app due to uncaught exception
'NSInvalidArgumentException', reason:
'to-many key not allowed here'
My data model is set up this way:
Item <<---> Category <--->> SortOrder
<<---> Store
In other words: Each item belongs to one category. Categories can have different sort orders for each store that includes a certain category.
So, I'm creating a fetch request to find all items for a certain store and would like to present the result using category names as sections, and sorted on the sort order.
When I perform the the fetch (last line below), I get the above error.
NSManagedObjectContext* context = [appDelegate managedObjectContext];
NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init];
NSPredicate *predicate = [NSPredicate predicateWithFormat:#"(status != %d) AND (ANY category.sort.include == YES) AND (ANY category.sort.store == %#)", ItemStatusDefault, store];
NSEntityDescription *entity = [NSEntityDescription entityForName:#"Item" inManagedObjectContext:context];
[fetchRequest setEntity:entity];
[fetchRequest setPredicate:predicate];
NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:#"category.sort.order" ascending:YES];
NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil];
[fetchRequest setSortDescriptors:sortDescriptors];
[sortDescriptors release];
[sortDescriptor release];
self.resultsController = [[NSFetchedResultsController alloc]
initWithFetchRequest:fetchRequest
managedObjectContext:context
sectionNameKeyPath:#"category.name"
cacheName:nil];
[fetchRequest release];
NSError *error;
BOOL success = [self.resultsController performFetch:&error];
If I change the sorting to, say, category names, it works.
NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:#"category.name" ascending:YES];
How can I get the NSSortDescriptor to sort on the sort order?
UPDATE:
So it seems this is not possible. I got a suggestion to create a transient property and sort on that, but Apple documentation clearly states
You cannot fetch using a predicate
based on transient properties
My conclusion here is that I cannot use NSFetchedResultsController out of the box. I need to either access the array of objects the NSFetchResultsController gives me and sort in memory, or setup my own fetch requests and skip NSFetchedResultsController.
iOS 5 provide now ordered relationships
https://developer.apple.com/LIBRARY/ios/releasenotes/DataManagement/RN-CoreData/index.html
UPDATE:
Link updated
Reference : "Core Data Release Notes for OS X v10.7 and iOS 5.0"
I am trying to create a Core Data iPhone application. One of the entities I'm tracking is cars, and one attribute of each car is "manufacturer".
In the "edit car" section of my application, I have a UIPickerView that needs to be loaded with each of the unique manufacturers that have previously been entered into the system. What I'm trying to do is create an NSFetchRequest to get an array of unique "manufacturer" attributes and use that to populate the UIPickerView.
The problem I'm running into is that whether there are zero records or 100 in the data store, there is always one record in the executed fetch request at element zero with a value #"".
Am I doing this wrong or is there an easier way to do this? I wish I could just run a quick sql query!!!
My code is below:
// Populate the manufacturerNameList array
NSManagedObjectContext *moc = [self.selectedLease managedObjectContext];
NSEntityDescription *ed = [NSEntityDescription entityForName:#"Car" inManagedObjectContext:moc];
NSFetchRequest *fetchRequest = [[[NSFetchRequest alloc] init] autorelease];
[fetchRequest setEntity:ed];
// Get only manufacturer and only uniques
[fetchRequest setResultType:NSDictionaryResultType];
[fetchRequest setPropertiesToFetch:[NSArray arrayWithObjects:#"manufacturer",nil]];
[fetchRequest setReturnsDistinctResults:YES];
// Sort by manufacturer in ascending order
NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:#"manufacturer" ascending:YES];
NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil];
[fetchRequest setSortDescriptors:sortDescriptors];
NSError *error = nil;
self.manufacturerNameList = [moc executeFetchRequest:fetchRequest error:&error];
if (error) {
// Handle the error
}
NSLog(#"The count of self.propertyNameList is %i",[self.propertyNameList count]);
Thanks!
manufacturerNameList is going to be an array of Car entities, not manufacturer names. Also, you need to pass an NSArray of NSPropertyDescription objects to setPropertiesToFetch not just attribute names.
Here is how you set the property:
NSDictionary *entityProperties = [ed propertiesByName];
[fetchRequest setPropertiesToFetch:[NSArray arrayWithObjects:[entityProperties objectForKey:#"manufacturer"], nil]];
The results from executeFetchRequest: will be an NSArray of Car entities, so you'll then have to extract the manufacturer attribute values in a loop or something.
You may want to consider creating a Manufacturer entity that your Car entity references, that will allow you to query more in the way you are attempting to right now.
Another approach would be to create an entity for manufacturers and have a relationship between Car and Manufacturer such that a Car has one Manufacturer and a Manufacturer has many Cars:
Car <<--> Manufacturer
The Manufacturer entity could have a string attribute its "name".
Then, you could get the full list of manufacturer names by fetching all the Manufacturer objects and looking at the "name" property.
The simplest explanation is that you have a car entity that has an empty manufacturer value. When the predicate sorts the fetch, the blank string will be ranked first.
I would log the entire self.propertyNameList and see what you're actually getting back.