Friends,
I'm facing another challenge in APEX and I hope you can help.
I have created a tree using the method described in John & Scott's superb book, "Pro Application Express" whereby the page link is stored in a table. Below is an example:
go to a page passing some parameters
f?p=&APP_ID.:3:&SESSION.::::P3_IDENTIFIER,P3_FAMILY_NAME:&P2_IDENTIFIER.,&P2_FAMILY_NAME.
When the page is run this works as expected. I can expand the tree and navigate to the page passing parameters if required.
However when I turned on session state protection these "hand crafted" links stopped working. Which I expected because the link contains no checksum.
After some investigation I see I have to use APEX_UTIL.PREPARE_URL to generate the URL with a checksum. Unfortunately this is where I run into problems. I can't seem to be able to pass the parameters values to the calling page.
The original tree query was:
select "IDENTIFIER" id,
"PARENT_IDENTIFIER" pid,
"TITLE" name,
"LINK" link,
null a1,
null a2
from <some table>
I then changed this to use APEX_UTIL.PREPARE_URL:
....
APEX_UTIL.PREPARE_URL('f?p='||:APP_ID||':3:'||:APP_SESSION||'::::P3_IDENTIFIER,P3_FAMILY_NAME:&P2_IDENTIFIER.,&P2_FAMILY_NAME.') link,
...
and this works, the page is called and I can see the values of the parameters passed. But I can't use this method as it is restricted to the one page!
Finally I tried storing the page number, parameters and parameter values in different columns of the table that the tree is based on and then bring them together:
...
APEX_UTIL.PREPARE_URL('f?p='||:APP_ID||':'||navigate_to_page||':'||:APP_SESSION||'::::'||parameters||':'||parameter_values) link,
...
Where:
navigate to page has the value of: 3
parameters has the value of: P3_IDENTIFIER,P3_FAMILY_NAME
parameter_values has the values of: &P2_IDENTIFIER.,&P2_FAMILY_NAME.
This now calls the page, but the parameter values have become literals. so where I'm expecting an identifier I see &P2_IDENTIFIER and ditto for family name.
What am I doing wrong? How can I pass values to my called page using apex_util_prepare_url?
In case of need, my environment details are: Apex 3.2.1, Oracle Application Server 10.1.2.3. Oracle Database 10.2.0.3
Thanks in advance for any help you may be able to provide.
I think you'll need to resolve those variables, using the v() function:
APEX_UTIL.PREPARE_URL('f?p='||:APP_ID
||':'||navigate_to_page
||':'||:APP_SESSION
||'::::'||parameters
||':'||v('P2_IDENTIFIER')||','||v('P2_FAMILY_NAME')) link,
On a side note, you might need to be careful about P2_FAMILY_NAME since it's being used in the url; it sounds like a plain text field which contains user-entered data?
Related
I recently renamed all of the URLs that make up my blog... and have written redirects for almost every page... using wildcards where I can... keeping in mind... all that I know is the * wildcard at this time...
Here is an example of what I have...
/season-1/2017/1/1/snl-s01e01-host-george-carlin -> /season-1/snl-s01e01-george-carlin 301
I want to write a catch-all that will redirect all 38 seasons of reviews with one redirect entry... but I can't figure out how to get rid of just the word "host" between s01e01- and -george-carlin... and was thinking it would work something like this...
/season-*/*/*/*/snl-s*e*-host-*-* -> /season-*/snl-s*e*[code to remove the word "host"]-*-* 301
Is that even close to being correct? Do I need that many *s
Thanks in advance for any help...
Unfortunately, you won't be able to reduce the number of individual redirect entries using the redirect features that Squarespace has to offer, namely the wildcard (*) and a single variable ([name]). Multiple variables would be needed, but only [name] is supported.
The closest you can get is:
/season-1/*/*/*/snl-s01e01-host-[name] -> /season-1/snl-s01e01-[name] 301
But, if I'm understanding things, while the above redirect appears more general, it would still need to be copy/pasted for each post individually. So although it demonstrates the best that could be achieved, it is not a technical improvement.
Therefore, there are only two alternatives:
Create a Google Sheet (or other spreadsheet) where the old URLs are copy/pasted in column one, a formula using arrayformula and regular expressions to parse the old URL and generate the new URL is added in column two, and in column three a formula is written to join the two cells with -> and 301. With that done, you could click, drag and highlight all cells in column 3, copy, and paste them in the "URL Shortcuts" text area in Squarespace.It can be quite time consuming to figure out, write and test the correct formula, but it does avoid having to manually type out every redirect. Whether it is less time/effort in total depends on the number of redirects and one's proficiency with writing spreadsheet formulas.It could be that using the redirect code above would simplify the formula that'd need to be written in the spreadsheet, which may save some time.
Another alternative would be to remove your redirects and instead handle the redirect via JavaScript added to the 404/Page-not-found page. Because it sounds like you already have all of the redirects in place but are simply trying to reduce the overall number, I wouldn't recommend changing to a JavaScript-based approach. There are other drawbacks to using JavaScript, in any case.
While using Crystal Reports I have encountered a strange bug, that repeats itself already with a number of my reports.
I still didn't fully get how I replicate it, but usually it goes as follows:
I add a parameter of any type to an existing report document, however it doesn't appear in a parameter prompt at all.
After I change parameter order in the Parameter Fields Section, my Parameter disappears and instead I see a duplicate of another parameter in a parameter list, and in the "Set Parameter Order"-Window I see this duplicated parameter as [ParameterName, ParameterName]. If I save the document in this moment and try to reopen it, CR crushes.
If I try to load this document in Vstudio with CREngine, the code exits with the message "Access violation".
Here is a pic of what is happening:
The reason you are not being prompted for the new "test" parameter is that it is not used by the report for anything.
The rest of the behavior is indeed strange. Consider removing the '#' character from the name of the first parameter to see if that fixes it.
If some of those parameters are from a stored procedure, perhaps your report is simply out of sync with the data source. Do Database, Verify Database...
I'm calling a REST API with a SharePoint Designer workflow on SharePoint online. I'm setting the column name with a variable, and when i put the variable into my URL to call it it says "Column [name] does not exist".
Annoying part is when I call just /items? I can see the column in the result, but if I try select it or filter by it I get 'does not exist'. I have alot of these columns similarly named, and I get the error for all of them.
I am using the internal name, I have tried adding "OData_" to the front. I've tried typing the url manually in the browser and entering values (incase the variable was causing issues) but I get the same error, column does not exist. but i can see it them I call all items. :(
so I have quite a few columns with naming convention "[Q#] Score [#]" eg "Q4 Score 2". The internal name that's clearly appearing in the full items results is "Q4_x0020_Score_x0020_2".
This works:
https://MYSITE.sharepoint.com/sites/portal/intranet/CorpServices/QSR/_api/web/lists/GetbyTitle('Audit')/Items?
and I get big full normal REST results that includes the line:
0
However if I try:
https://MYSITE.sharepoint.com/sites/portal/intranet/CorpServices/QSR/_api/web/lists/GetbyTitle('Audit')/Items?$Select=Q4_x0020_Score_x0020_2
Then I get:
-2146232832, Microsoft.SharePoint.SPExceptionColumn 'Q4_x0020_Score_x0020_2' does not exist. It may have been deleted by another user.
I expect to be able to select that column (and the dozens like it) but none work. I've searched all similar problems on the forum and they've usually got a spelling mistake or forgot the ODATA_ but i cant seem to get the problem. Please help.
It seemed to be working intermittently.... So it was in fact just a naming error...... Half of the columns were [Q#]_x0020_Score_x0020_[#] and half were [Q#]_x0020_score_x0020_[#]. The word "Score" was capitalized on some and not others. I Didn't realize the HTTP Calls were case sensitive. Now I have added a bunch of if statements to handle the different variations haha. Thanks for reading.
Judging by the naming convention you are on an older version of SharePoint. The x0020 is the value for a space. Ideally when you first create the column you would name it without the spacing. For example UserInformation. Then come in and edit the name after the fact and call it User Information. If you click on the title name and look at the URL, you will see what the actual name of the column is at the end of the URL. It is case sensitive because you can have a column named score and Score which is ultimately why it wasn't working.
Must load all fields like this
var lists = context.Web.Lists;
context.Load(lists);
context.ExecuteQuery();
CamlQuery query = new CamlQuery();
query.ViewXml = #"";
var list = lists.GetById("file.guid");
var listitems = list.GetItems(query);
context.Load(listitems);
context.ExecuteQuery();
var creationInformation = new ListItemCreationInformation();
var newItem=list.AddItem(creationInformation);
var fields = list.Fields;
context.Load(fields);
context.ExecuteQuery();
I would like to select a customer from the select box by start typing its phone number.
How can I do that?
I have seen some are using name_search method.But still i am confused how to use it in both front end and back end.
Or is there any other solution for this.
Override the name_search method of your model and the domain you want on the args variable. Take a look at addons/account/account.py around line 595 args += [('type', '=', type)] for a concrete implementation. Make sure that you return the appropriate data structure as documented in the method's docstring at openerp/models.py.
For Auto complete in odoo. It provides suggestion only in case of using Many2one field in any module.
If you want to show suggestion and autocomplete. Create a model to store the mobile numbers and then use that particular model as foreign key in existing model.
That will do for you.
I'm using a plugin and want to perform an action based on the records statuscode value. I've seen online that you can use entity.FormattedValues["statuscode"] to get values from option sets but when try it I get an error saying "The given key was not present in the dictionary".
I know this can happen when the plugin cant find the change for the field you're looking for, but i've already checked that this does exist using entity.Contains("statuscode") and it passes by that fine but still hits this error.
Can anyone help me figure out why its failing?
Thanks
I've not seen the entity.FormattedValues before.
I usually use the entity.Attributes, e.g. entity.Attributes["statuscode"].
MSDN
Edit
Crm wraps many of the values in objects which hold additional information, in this case statuscode uses the OptionSetValue, so to get the value you need to:
((OptionSetValue)entity.Attributes["statuscode"]).Value
This will return a number, as this is the underlying value in Crm.
If you open up the customisation options in Crm, you will usually (some system fields are locked down) be able to see the label and value for each option.
If you need the label, you could either do some hardcoding based on the information in Crm.
Or you could retrieve it from the metadata services as described here.
To avoid your error, you need to check the collection you wish to use (rather than the Attributes collection):
if (entity.FormattedValues.Contains("statuscode")){
var myStatusCode = entity.FormattedValues["statuscode"];
}
However although the SDK fails to confirm this, I suspect that FormattedValues are only ever present for numeric or currency attributes. (Part-speculation on my part though).
entity.FormattedValues work only for string display value.
For example you have an optionset with display names as 1, 2, 3,
The above statement do not recognize these values because those are integers. If You have seen the exact defintion of formatted values in the below link
http://msdn.microsoft.com/en-in/library/microsoft.xrm.sdk.formattedvaluecollection.aspx
you will find this statement is valid for only string display values. If you try to use this statement with Integer values it will throw key not found in dictionary exception.
So try to avoid this statement for retrieving integer display name optionset in your code.
Try this
string Title = (bool)entity.Attributes.Contains("title") ? entity.FormattedValues["title"].ToString() : "";
When you are talking about Option set, you have value and label. What this will give you is the label. '?' will make sure that the null value is never passed.