I'm sure this has been asked countless times, and I've seen similar questions though the answer still eludes me.
I have an application with multiple view controllers and as a good view controller does its own task. However I find myself stuck in that I can't switch from one view controller to another. I've seen many people say "use a navigation controller" but this isn't what I want to use due to the unwanted view elements that are part and parcel to view controller.
I've done the following and have had limited success. The view controller is switched but the view does not load and I get an empty view instead:
- (IBAction)showLogin:(id)sender
{
PPLoginViewController *login = [[PPLoginViewController alloc] initWithNibName:#"PPLoginViewController" bundle:nil];
PPAppDelegate *appDelegate = [UIApplication sharedApplication].delegate;
appDelegate.window.rootViewController = login;
[self.view insertSubview:login.view atIndex:0];
}
Using UINavigationController as a rootViewController is a good tone of creating iOS application.
As i understand unwanted view elements is a navigationBar? You can just hide it manually, setting:
[self.navigationController setNavigationBarHidden:YES];
And about your case, if you want to change you current viewController(targeting iOS 6), you can just present new one:
[self presentViewController:login animated:YES completion:nil];
or add child (Here is nice example to add and remove a child):
[self addChildViewController:login];
Why to set UINavigationController as a root?
1) First of all it makes your application visible viewcontrollers to be well structured. (Especially it is needed on iPhone). You can always get the stack and pop (or move) to any viewController you want.
2) Why I make always make navigation as a root one, because it makes the application more supportable, so to it will cost not so many code changes to add some features to the app.
If you create one (root) viewcontroller with a lot of children, or which presents other viewcontrolls, it will make your code really difficult to support, and make something like gode-object.
Listen to George, UINavigationController is the way to go. Your reasons for not wanting to use it are not valid.
However, the reason your code doesn't work might have to do with the unnecessary line after setting the rootViewController to the login vc.
Per Apple's documentation, setting rootViewController automatically sets the window's view to the view controller's view.
Ok I am trying to refresh the tab content of each of my tabs after a web call has been made, and I have tried soo many different methods to do this that I have lost count. Could someone please tell me how this is possible?
The web call just calls JSON from a server and uses it to update the content of the tabs. For testing purposes I have a button set up inside my settings class. Settings class is a view within the home tab which has a button called refresh. When clicked this takes JSON stored on the device which is different to the one called from the web call on application start up. This saves me having to change the JSON on the server.
I will take you through some of the techniques I have tried and would be grateful if someone could tell me what I am doing wrong.
I tried making an instance of the class and calling the refresh method like this
DashboardVC *db = [[DashboardVC alloc] init];
[db refreshMe];
The refresh method in dashboard class is this
-(void) refreshMe
{
[self loadView];
[self viewDidLoad];
}
However no luck. This method will work if I call it inside the Dashboard class, but wont work if I call it from another class. I think it is become I am instantiating a new class and calling refresh on that. So I dropped that technique and moved onto the next method
This loops through all the tabBars and changes the tabTitles without any issues, so it I know it is definitely looping through the ViewControllers properly.
I also tried every varient of the view methods like ViewDidAppear, viewWillAppear etc, no luck.
I also tried accessing the refreshMe method I made in the dashBoard class through the tabController like this
[[[self.tabBarController viewControllers] objectAtIndex:0] refreshMe];
But again no luck, this just causes my application to crash.
I read through this guide
https://developer.apple.com/library/ios/#documentation/WindowsViews/Conceptual/ViewControllerPGforiOSLegacy/TabBarControllers/TabBarControllers.html
on the apple website but it doesn't seem to cover how to refresh individual tab content.
All I want is to have each individual tab refresh its content after the web call is made, and have spent ages trying to figure this out, but nothing is working.
So would be very grateful if someone could show me what I am doing wrong?
Thanx in advance....
EDIT:
Expand on what I have tried
After discussion with Michael I realised you should never call loadView as against Apple guidelines. So I removed any references to LoadView. I have now placed a method in all the main ViewControllers called RefreshMe which sets up the views, images texts etc in the class. And this method is placed inside the ViewDidLoad. Now I want to be able to call these methods after a web call has taken place, so effectively refreshing the application.
My viewDidLoad now looks like this in all my the main classes.
- (void) viewDidLoad {
[super viewDidLoad];
[self refreshMe];
}
And then the refreshMe method contains the code which sets up the screen.
The JSON data pulled from the web call will set up the content of each of the 5 tabs, so need them all to be refreshed after web call.
I tried looping through the viewControllers and calling viewDidLoad, which should in turn call the refreshMe method which sets up the class, however nothing happens. Code I used was this
NSArray * tabBarViewControllers = [self.tabBarController viewControllers];
for(UIViewController * viewController in tabBarViewControllers)
{
[viewController viewDidLoad];
}
For the time being I have also included
NSLog(#"Method called");
in the viewDidLoad of each class to test if it is being called. However the message is only being printed out when I first load the application or if I re-enter the application. This method should be called after I click the refresh button in the settings screen but it isn't and I have no idea why.
Anyone have any idea why this is not working?
From the question and your comments, it sounds like there are at least two problems:
You're having trouble accessing the view controllers managed by your app's tab bar controller.
You seem to be working against the normal operation of your view controllers.
The first part should be straightforward to sort out. If you have a pointer to an object, you can send messages to that object. If the corresponding method doesn't execute, then either the pointer doesn't point where you think it does or the object doesn't have the method that you think it does. Let's look at your code:
NSArray * tabBarViewControllers = [self.tabBarController viewControllers];
for(UIViewController * viewController in tabBarViewControllers)
{
[viewController viewDidLoad];
}
This code is supposed to call -viewDidLoad on each of the view controllers managed by some tab bar controller. Leaving aside the wisdom of doing that for a moment, we can say that this code should work as expected if self.tabBarController points to the object that you think it does. You don't say where this code exists in your app -- is it part of your app delegate, part of one of the view controllers managed by the tab bar controller in question, or somewhere else? Use the debugger to step through the code. After the first line, does tabBarViewControllers contain an array of view controllers? Is the number of view controllers correct, and are they of the expected types? If the -viewDidLoad methods for your view controllers aren't being called, it's a good bet that the answer is "no," so figure out why self.tabBarController isn't what you think.
Now, it's definitely worth pointing out (as Michael did) that you shouldn't be calling -viewDidLoad in the first place. The view controller will send that method to itself after it has created its view (either loaded it from a .xib/storyboard file or created it programmatically). If you call -viewDidLoad yourself, it'll either run before the view has been created or it'll run a second time, and neither of those is helpful.
Also, it doesn't make much sense to try to "refresh" each view controller's view preemptively. If your app is retrieving some data from a web service (or anywhere else), it should use the resulting data to update its model, i.e. the data objects that the app manages. When a view controller is selected, the tab bar controller will present its view and the view controller's -viewWillAppear method will be called just before the view is displayed. Use that method to grab the data you need from the model and update the view. Doing it this way, you know that:
the view controller's view will have already been created
the data displayed in the view will be up to date, even if one of the other view controllers modified the data
you'll never spend time updating views that the user may never look at
Similarly, if the user can make any changes to the displayed data, you should ensure that you update the model either when the changes are made or else in your view controller's -viewWillDisappear method so that the next view controller will have correct data to work with.
Instead of refreshing your view controllers when updating your tab bar ordering, why not simply refresh your views right before they will appear by implementing your subclassed UIViewController's viewWillAppear: method?
What this means is that each time your view is about to appear, you can update the view for new & updated content.
Short version
If I'm writing my own custom split view controller, what do I need to do to make the child view controllers work as expected?
For instance: to send viewWillAppear: and so on.
Long version
Background
A while back I answered the following question:
Switch between UIViewControllers using UISegmentedControl
With the following answer:
The right way to do it is to have the controller handling the UISegmentedControl add the views of the controllers as subviews.
[self.view addSubview:controller.view];
It's your responsibility to send viewWillAppear: and so on.
However, tc. pointed out that this is not as trivial as it sounds:
No. View controllers are not meant to be used like that - controller will miss out on a lot of the UIViewController magic that's taken for granted (namely -view{Will,Did}{Appear,Disappear}: and -shouldRotateToViewOritentation:).
By "magic", I'm referring to everything UIKit does behind the scenes. You also forgot -parentViewController (which is important for things like modal view controllers). Additionally, somewhere in the depths of UIKit, it automatically calls -viewSomethingSomething: for you, so you might get -viewDidDisappear: twice! (I can't remember the exact details, but there's another user reporting that all you need to do is call -viewWillAppear: and the other three methods happen automatically.) The key issue is that Apple doesn't document the "magic" or how it changes between OS updates.
Since then I've been thinking that one should compile a guide for what needs to be present in the parent view controller in order for the child view controllers to work as expected. Apple's documentation doesn't cover this and Google didn't help much either, so now I'm hoping to find this knowledge within the stackoverflow community.
I've written several controllers like this and they all seem to work, but I can't help but wonder if I'm missing out on important view controller magic.
I think the best solution is "don't do that". Instead of hoping that you can duplicate all of UIViewController's behavior without being rejected for using private API calls why not create non-UIViewController controller objects to manage your subviews? A "controller" is not necessarily a UIViewController.
At a minimum you would need to override or mix in replacement getters for parentViewController, splitViewController, navigationController, tabBarController, and interfaceOrientation (and probably also modalViewController). For each property you would need to make sure that any private setter called by UIKit still works as expected and any changes to those values made by modifying UIViewController ivars directly are also correctly reflected in your implementations.
You're also going to need to figure out how UIKit determines which UIViewController is currently active and should receive view controller lifecycle methods because you need to make sure that these are sent to your container view controller and not only to one of it's children.
You will also have to hope that you haven't just constructed a situation which isn't supported by any of Apple's view controller classes. For example will any of them break if they have a parentViewController but their navigationController, tabBarController, and splitViewController are all nil?
Finally you'll need to keep up with any changes to these private implementation details with every iOS release.
I have a navigation controller. One of the views adds custom subviews in its viewDidAppear:. I notice that the first time I navigate to an instance of this view controller after launching the app, viewDidAppear: invokes twice. If I pop this view off the stack and navigate to it again, viewDidAppear: invokes only once per appearance. All subsequent appearances invoke viewDidAppear: once.
The problem for me is that the first time I get to this view I end up with twice the number of subviews. I work around this problem by introducing a flag variable or some such, but I'd like to understand what is happening and how come I get two invocations in these circumstances.
You should never rely on -viewWillAppear:/-viewDidAppear: being called appropriately balanced with the disappear variants. While the system view controllers will do the best they can to always bracket the calls properly, I don't know if they ever guarantee it, and certainly when using custom view controllers you can find situations where these can be called multiple times.
In short, your -viewWillAppear:/-viewDidAppear: methods should be idempotent, meaning if -viewDidAppear: is called twice in a row on your controller, it should behave properly. If you want to load custom views, you may want to do that in -viewDidLoad instead and then simply put the on-screen (if they aren't already) in -viewDidAppear:.
You could also put a breakpoint in your -viewDidAppear: method to see why it's being called twice the first time it shows up.
maybe you invoke viewDidAppear in viewDidLoad (or some other stuff is going on there), since it's invoked only once during loading the view from the memory. It would match, that it's invoked two times only the first time.
This was not an iOS 5 bug, but a hidden behavior of addChildViewController:. I should file a radar for lack of documentation, I think
https://github.com/defagos/CoconutKit/issues/4
If you have a line like this in your AppDelegate
window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]];
make sure you DON'T have a "Main nib file base name" property in your plist set to "Window.xib" or whatever your custom window nib is named. If you do, remove that row from your plist and make sure you something like
yourRootVC = [[UIViewController alloc] init];
[window setRootViewController:yourRootVC];
in your AppDelegate after instantiating your window. In most cases, you could then safely delete the Window.xib as well.
You definitely should provide more info.
Is this the root view controller?
Maybe you initiate the navigation controller with this root view controller and then push it to the navigation controller once again?
Another solution that may have been your underlying cause: Be sure you are not presenting any new view controllers from within your viewWillAppear: method.
I was calling:
[appDel.window.rootViewController presentViewController:login animated:YES completion:nil];
from within viewWillAppear and seeing my originating VC's viewDidAppear: method called twice successively with the same stack trace as you mention. And no intermediary call to viewDidDisappear:
Moving presentViewController: to the originating VC's viewDidAppear: method cleared up the double-call issue, and so now the flow is:
Original viewDidAppear: called
Call presentViewController here
Original viewDidDisappear: called
New view is presented and no longer gives me a warning about "unbalanced VC display"
Fixed with help from this answer: https://stackoverflow.com/a/13315360/1143123 while trying to resolve "Unbalanced calls to begin/end appearance transitions for ..."
it's such an annoying problem, you'd think it runs once but then I now found out about this which is causing mayhem... This applies to all 3 (ViewDidAppear, ViewDidLoad, and ViewWillAppear), I am getting this when integrating with a payment terminal; once it finish calling the API, the window is being re-loaded when it's already on-screen and all it's memory is still there (not retained).
I resolved it by doing the following to all the routines mentioned above, below is a sample to one of them:
BOOL viewDidLoadProcessed = false;
-(void)viewDidLoad:(BOOL)animated
{
if (!viewDidLoadProcessed)
{
viewDidLoadProcessed = YES;
.
.
.
... do stuff here...
.
.
}
}
Repeat the above for all the other two, this prevents it from running twice. This never occurred before Steve Jobs died !!!
Kind Regards
Heider Sati
Adding [super viewDidAppear:animated]; worked for me:
//Called twice
- (void)viewDidAppear:(BOOL)animated{
}
//Called once
- (void)viewDidAppear:(BOOL)animated{
[super viewDidAppear:animated];
}
I've read numerous posts about people having problems with viewWillAppear when you do not create your view hierarchy just right. My problem is I can't figure out what that means.
If I create a RootViewController and call addSubView on that controller, I would expect the added view(s) to be wired up for viewWillAppear events.
Does anyone have an example of a complex programmatic view hierarchy that successfully receives viewWillAppear events at every level?
Apple's Docs state:
Warning: If the view belonging to a view controller is added to a view hierarchy directly, the view controller will not receive this message. If you insert or add a view to the view hierarchy, and it has a view controller, you should send the associated view controller this message directly. Failing to send the view controller this message will prevent any associated animation from being displayed.
The problem is that they don't describe how to do this. What does "directly" mean? How do you "indirectly" add a view?
I am fairly new to Cocoa and iPhone so it would be nice if there were useful examples from Apple besides the basic Hello World crap.
If you use a navigation controller and set its delegate, then the view{Will,Did}{Appear,Disappear} methods are not invoked.
You need to use the navigation controller delegate methods instead:
navigationController:willShowViewController:animated:
navigationController:didShowViewController:animated:
I've run into this same problem. Just send a viewWillAppear message to your view controller before you add it as a subview. (There is one BOOL parameter which tells the view controller if it's being animated to appear or not.)
[myViewController viewWillAppear:NO];
Look at RootViewController.m in the Metronome example.
(I actually found Apple's example projects great. There's a LOT more than HelloWorld ;)
I finally found a solution for this THAT WORKS!
UINavigationControllerDelegate
I think the gist of it is to set your nav control's delegate to the viewcontroller it is in, and implement UINavigationControllerDelegate and it's two methods. Brilliant! I'm so excited i finally found a solution!
Thanks iOS 13.
ViewWillDisappear, ViewDidDisappear, ViewWillAppear and
ViewDidAppear won't get called on a presenting view controller on
iOS 13 which uses a new modal presentation that doesn't cover the
whole screen.
Credits are going to Arek Holko. He really saved my day.
I just had the same issue. In my application I have 2 navigation controllers and pushing the same view controller in each of them worked in one case and not in the other. I mean that when pushing the exact same view controller in the first UINavigationController, viewWillAppear was called but not when pushed in the second navigation controller.
Then I came across this post UINavigationController should call viewWillAppear/viewWillDisappear methods
And realized that my second navigation controller did redefine viewWillAppear. Screening the code showed that I was not calling
[super viewWillAppear:animated];
I added it and it worked !
The documentation says:
If you override this method, you must call super at some point in your implementation.
I've been using a navigation controller. When I want to either descend to another level of data or show my custom view I use the following:
[self.navigationController pushViewController:<view> animated:<BOOL>];
When I do this, I do get the viewWillAppear function to fire. I suppose this qualifies as "indirect" because I'm not calling the actual addSubView method myself. I don't know if this is 100% applicable to your application since I can't tell if you're using a navigation controller, but maybe it will provide a clue.
Firstly, the tab bar should be at the root level, ie, added to the window, as stated in the Apple documentation. This is key for correct behavior.
Secondly, you can use UITabBarDelegate / UINavigationBarDelegate to forward the notifications on manually, but I found that to get the whole hierarchy of view calls to work correctly, all I had to do was manually call
[tabBarController viewWillAppear:NO];
[tabBarController viewDidAppear:NO];
and
[navBarController viewWillAppear:NO];
[navBarController viewDidAppear:NO];
.. just ONCE before setting up the view controllers on the respective controller (right after allocation). From then on, it correctly called these methods on its child view controllers.
My hierarchy is like this:
window
UITabBarController (subclass of)
UIViewController (subclass of) // <-- manually calls [navController viewWill/DidAppear
UINavigationController (subclass of)
UIViewController (subclass of) // <-- still receives viewWill/Did..etc all the way down from a tab switch at the top of the chain without needing to use ANY delegate methods
Just calling the mentioned methods on the tab/nav controller the first time ensured that ALL the events were forwarded correctly. It stopped me needing to call them manually from the UINavigationBarDelegate / UITabBarControllerDelegate methods.
Sidenote:
Curiously, when it didn't work, the private method
- (void)transitionFromViewController:(UIViewController*)aFromViewController toViewController:(UIViewController*)aToViewController
.. which you can see from the callstack on a working implementation, usually calls the viewWill/Did.. methods but didn't until I performed the above (even though it was called).
I think it is VERY important that the UITabBarController is at window level though and the documents seem to back this up.
Hope that was clear(ish), happy to answer further questions.
As no answer is accepted and people (like I did) land here I give my variation. Though I am not sure that was the original problem. When the navigation controller is added as a subview to a another view you must call the viewWillAppear/Dissappear etc. methods yourself like this:
- (void) viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
[subNavCntlr viewWillAppear:animated];
}
- (void) viewWillDisappear:(BOOL)animated
{
[super viewWillDisappear:animated];
[subNavCntlr viewWillDisappear:animated];
}
Just to make the example complete. This code appears in my ViewController where I created and added the the navigation controller into a view that I placed on the view.
- (void)viewDidLoad {
// This is the root View Controller
rootTable *rootTableController = [[rootTable alloc]
initWithStyle:UITableViewStyleGrouped];
subNavCntlr = [[UINavigationController alloc]
initWithRootViewController:rootTableController];
[rootTableController release];
subNavCntlr.view.frame = subNavContainer.bounds;
[subNavContainer addSubview:subNavCntlr.view];
[super viewDidLoad];
}
the .h looks like this
#interface navTestViewController : UIViewController <UINavigationControllerDelegate> {
IBOutlet UIView *subNavContainer;
UINavigationController *subNavCntlr;
}
#end
In the nib file I have the view and below this view I have a label a image and the container (another view) where i put the controller in. Here is how it looks. I had to scramble some things as this was work for a client.
Views are added "directly" by calling [view addSubview:subview].
Views are added "indirectly" by methods such as tab bars or nav bars that swap subviews.
Any time you call [view addSubview:subviewController.view], you should then call [subviewController viewWillAppear:NO] (or YES as your case may be).
I had this problem when I implemented my own custom root-view management system for a subscreen in a game. Manually adding the call to viewWillAppear cured my problem.
Correct way to do this is using UIViewController containment api.
- (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view.
UIViewController *viewController = ...;
[self addChildViewController:viewController];
[self.view addSubview:viewController.view];
[viewController didMoveToParentViewController:self];
}
I use this code for push and pop view controllers:
push:
[self.navigationController pushViewController:detaiViewController animated:YES];
[detailNewsViewController viewWillAppear:YES];
pop:
[[self.navigationController popViewControllerAnimated:YES] viewWillAppear:YES];
.. and it works fine for me.
A very common mistake is as follows.
You have one view, UIView* a, and another one, UIView* b.
You add b to a as a subview.
If you try to call viewWillAppear in b, it will never be fired, because it is a subview of a
iOS 13 bit my app in the butt here. If you've noticed behavior change as of iOS 13 just set the following before you push it:
yourVC.modalPresentationStyle = UIModalPresentationFullScreen;
You may also need to set it in your .storyboard in the Attributes inspector (set Presentation to Full Screen).
This will make your app behave as it did in prior versions of iOS.
I'm not 100% sure on this, but I think that adding a view to the view hierarchy directly means calling -addSubview: on the view controller's view (e.g., [viewController.view addSubview:anotherViewController.view]) instead of pushing a new view controller onto the navigation controller's stack.
I think that adding a subview doesn't necessarily mean that the view will appear, so there is not an automatic call to the class's method that it will
I think what they mean "directly" is by hooking things up just the same way as the xcode "Navigation Application" template does, which sets the UINavigationController as the sole subview of the application's UIWindow.
Using that template is the only way I've been able to get the Will/Did/Appear/Disappear methods called on the object ViewControllers upon push/pops of those controllers in the UINavigationController. None of the other solutions in the answers here worked for me, including implementing them in the RootController and passing them through to the (child) NavigationController. Those functions (will/did/appear/disappear) were only called in my RootController upon showing/hiding the top-level VCs, my "login" and navigationVCs, not the sub-VCs in the navigation controller, so I had no opportunity to "pass them through" to the Nav VC.
I ended up using the UINavigationController's delegate functionality to look for the particular transitions that required follow-up functionality in my app, and that works, but it requires a bit more work in order to get both the disappear and appear functionality "simulated".
Also it's a matter of principle to get it to work after banging my head against this problem for hours today. Any working code snippets using a custom RootController and a child navigation VC would be much appreciated.
In case this helps anyone. I had a similar problem where my ViewWillAppear is not firing on a UITableViewController. After a lot of playing around, I realized that the problem was that the UINavigationController that is controlling my UITableView is not on the root view. Once I fix that, it is now working like a champ.
I just had this problem myself and it took me 3 full hours (2 of which googling) to fix it.
What turned out to help was to simply delete the app from the device/simulator, clean and then run again.
Hope that helps
[self.navigationController setDelegate:self];
Set the delegate to the root view controller.
In my case problem was with custom transition animation.
When set modalPresentationStyle = .custom viewWillAppear not called
in custom transition animation class need call methods:
beginAppearanceTransition and endAppearanceTransition
For Swift. First create the protocol to call what you wanted to call in viewWillAppear
protocol MyViewWillAppearProtocol{func myViewWillAppear()}
Second, create the class
class ForceUpdateOnViewAppear: NSObject, UINavigationControllerDelegate {
func navigationController(_ navigationController: UINavigationController, willShow viewController: UIViewController, animated: Bool){
if let updatedCntllr: MyViewWillAppearProtocol = viewController as? MyViewWillAppearProtocol{
updatedCntllr.myViewWillAppear()
}
}
}
Third, make the instance of ForceUpdateOnViewAppear to be the member of the appropriate class that have the access to the Navigation Controller and exists as long as Navigation controller exists. It may be for example the root view controller of the navigation controller or the class that creates or present it. Then assign the instance of ForceUpdateOnViewAppear to the Navigation Controller delegate property as early as possible.
In my case that was just a weird bug on the ios 12.1 emulator. Disappeared after launching on real device.
I have created a class that solves this problem.
Just set it as a delegate of your navigation controller, and implement simple one or two methods in your view controller - that will get called when the view is about to be shown or has been shown via NavigationController
Here's the GIST showing the code
ViewWillAppear is an override method of UIViewController class so adding a subView will not call viewWillAppear, but when you present, push , pop, show , setFront Or popToRootViewController from a viewController then viewWillAppear for presented viewController will get called.
My issue was that viewWillAppear was not called when unwinding from a segue. The answer was to put a call to viewWillAppear(true) in the unwind segue in the View Controller that you segueing back to
#IBAction func unwind(for unwindSegue: UIStoryboardSegue, ViewController subsequentVC: Any) {
viewWillAppear(true)
}
I'm not sure this is the same problem that I solved.
In some occasions, method doesn't executed with normal way such as "[self methodOne]".
Try
- (void)viewWillAppear:(BOOL)animated
{
[self performSelector:#selector(methodOne)
withObject:nil afterDelay:0];
}
You should only have 1 UIViewController active at any time. Any subviews you want to manipulate should be exactly that - subVIEWS - i.e. UIView.
I use a simlple technique for managing my view hierarchy and have yet to run into a problem since I started doing things this way. There are 2 key points:
a single UIViewController should be used to manage "a screen's worth"
of your app
use UINavigationController for changing views
What do I mean by "a screen's worth"? It's a bit vague on purpose, but generally it's a feature or section of your app. If you've got a few screens with the same background image but different overlays/popups etc., that should be 1 view controller and several child views. You should never find yourself working with 2 view controllers. Note you can still instantiate a UIView in one view controller and add it as a subview of another view controller if you want certain areas of the screen to be shown in multiple view controllers.
As for UINavigationController - this is your best friend! Turn off the navigation bar and specify NO for animated, and you have an excellent way of switching screens on demand. You can push and pop view controllers if they're in a hierarchy, or you can prepare an array of view controllers (including an array containing a single VC) and set it to be the view stack using setViewControllers. This gives you total freedom to change VC's, while gaining all the advantages of working within Apple's expected model and getting all events etc. fired properly.
Here's what I do every time when I start an app:
start from a window-based app
add a UINavigationController as the window's rootViewController
add whatever I want my first UIViewController to be as the rootViewController of the nav
controller
(note starting from window-based is just a personal preference - I like to construct things myself so I know exactly how they are built. It should work fine with view-based template)
All events fire correctly and basically life is good. You can then spend all your time writing the important bits of your app and not messing about trying to manually hack view hierarchies into shape.