I have a navigationController and 3 View controllers. VC1 pushes VC2 and VC2 uses PresentModalViewController to display the 3rd VC
When VC2 uses presentModalViewController to show VC3, is the VC3 actually pushed on the navigationcontroller stack?
viewdidload of VC3 is called only 1st time. My goal is to show VC3 with a new imageView everytime. Where do I add the code to do that? viewdidappear and viewwillappear of VC3 is not fired either
It is my understanding that VC3 will be in the view hierarchy of VC2 and not the navigationController. In order to be added to the view hierarchy of the navigationController you would have to push VC3 onto it.
viewDidLoad should only be called once, unless the nib file itself was unloaded from memory, due to low memory. The documentation states that viewWillAppear and viewDidAppear should be called on VC3, so I don't know why they are not.
Update
I just tested and VC3 does have -(void)viewDidAppear:(BOOL)animated called. Make sure that the signature on the selector is correct
Related
i'm turning around for days.
I've got a hierarchy of 3 ViewControllers.
Start in VC1, from there you can load VC2. In VC2 you can load VC3.
My navigation works fine VC1->VC2->VC3 and the same backwards.
VC3 allows the user to go back to VC1.
I wonder if it's possible to tell VC3 that VC1 is now it's delegate.
It would work fine with VC2 but I'd like to use the datas saved in VC3 in VC1.
Create a delegate to pass value from one class to another.
Then set delegate in both VC1 and VC2 where VC1 recieves from VC2 and VC2 recieves from VC3
Then call for delegate from VC3 and pass value to VC2 .In VC2 the called method implement the invocation of its delegate to VC1 and the value is there in vc1
VC3-->del-->VC2-->del->VC1
If VC1 is the delegate of VC2, you could just assign VC2's delegate property to the delegate property of VC3
In your VC2 #implementation before VC3 is pushed onto the navigation stack:
vc3Instance.delegate = self.delegate
I suggest adding a weak property called 'master' for example in each view controller and make it point to the view controller that presented it. Once you do that, you can then reach VC1 (and all it's data) from VC3 in the following way:
VC1ViewController *vc1 = self.master.master;
I've got a hierarchy of 3 ViewControllers on a UINavigationController app.
Start in VC1, from there you can load VC2. In VC2 you can load VC3.
You can navigate backwards through the VC's by pressing the left nav button on the navbar.
But the designer wants to be able to jump from VC1->VC3, and then if you press the left navbar button to go back it will take you to vc2.
Is it possible to have have this kind of navigation with a NAV controller?
If the user wants to go VC1-VC3 can i push both VC2 and then VC3 onto the navigationController stack so that the navigation is maintained correctly.
Also if the user wants to go from VC3->VC1 can i pop both VC3 and then VC2 off the navigationController stack so that VC1 displays?
First - tell your designers that this kind of navigation is confusing for the users and they should take some more usability and UX classes. Second - yes it's possible - the easiest way would be to call
[navigationController setViewControllers:newViewControllers animated:YES];
This will replace the entire navigation stack, so ensure that it contains [VC1, VC2, VC3] (and whatever else might happen to be before them)
The normal back button will pop to the previous view controller. You could make a left bar button in you V3 which will pop to a given view controller in your hierarchy using the UINavigationController method (giving your V1 instance as viewController)
- (NSArray *)popToViewController:(UIViewController *)viewController animated:(BOOL)animated
Push BOTH VC2 and VC3 onto the stack to preserve the navigation when pressing the back button. To go from VC3 to VC1 you can use...
[navigationController popToViewController:vc1 animated:YES];
or if VC1 is the root...
[navigationController popToRootViewControllerAnimated:YES];
I have the base ViewController which i my main menu(VC1).
From there I navigate to another VC which displays a UITable(VC2). From here i can call
[self.parentViewController dismissModalViewControllerAnimated:YES];
To move back to the main menu. That works fine.
If i load another VC(V3) with displays a UIWebView from VC2 and want to jump back to the main menu(VC1), how can this be done in the best way?
So I navigate VC1->VC2->VC3 and then want to jump VC3->VC1.
My app doesn't have a UINavigationViewController or anything like that.
Many Thanks,
-Code
You could try creating a method in the parent vc (vc2) that you call from vc3 that does the following:
-(void)dismissTwo
{
[self dismissModalViewControllerAnimated:NO];
[self.parentViewController dismissModalViewControllerAnimated:YES];
}
That's untested, but give it a shot.
Its tricky if you used navigation controller you could have popped to root view controller using poptorootviewcontroller.
However in your case if you can implement a delegates for VC2 and VC3. In the delegate for VC3 in VC2 dismiss VC3 and call delegate of VC2 which is implemented in VC1.
So basically the flow is as follows
Create VC1
When you create VC2 from VC1 assign delegate to VC1
When you create VC3 from VC2 assign delegate to VC2
From this point on you can pass messages in a cleaner way between the view controllers.
For sake of simplicity I have 3 UIViewControllers named, vc0, vc1, vc2. My Flow of operations is a button in vc0 calls
[vc0 presentModalViewController:vc1]
Then in vc1 I have another button in vc1 that calls
[vc1 presentModalViewController:vc2]
In both vc1 and vc2 I have an X button that calls
[self dismissModalViewController];
Now the first run threw that flow is fine, vc1 is presented modally, followed by vc2 after the correct button presses. Dismissing the views also behaves correctly. However, when I attempt to start the flow all over again I'm unable to present vc2 modally from vc1. Has anyone else run into a similar problem before?
I think You might be missing the allot + init for the view controllers that you want to present
Need some best practice advice here...
Navigation based application. Root view is a UITableView where user can drill down to a detail UIViewController (call it VC1). User wants to initiate some task but it may require additional info before it can proceed. If so then VC1 allocs & presents modal VC2 using the "flip" transition holding a strong reference to VC2 in a property.
All fairly standard. Here's where I'm running into trouble. Once user fills out required info in VC2 the app can either continue on to a MFMailComposeViewController or flip back to VC1. If they continue to MailCompose then when that dismisses it should return to VC1.
VC2 has a weak reference to VC1 and the problem arrises when VC2 tries to dismiss itself and present MFMailComposeViewController:
[self dismissModalViewControllerAnimated:YES];
[VC1 performSelector:#selector(showMailModalView) withObject:nil afterDelay:0.2];
I get a EXC_BAD_ACCESS on VC1 because, apparently, my weak reference to VC1 has already been dealloc'd even though VC1 has strong reference to VC2!?!
So my question is...how should this be handled? Would the delegate pattern be better? How would that be triggered?
Note: VC1 is quite large and VC2 isn't often needed so I'm trying to keep VC2 as separate as possible from VC1 (including its own NIB).
VC2 has a weak reference to VC1 and the problem arrises when VC2 tries
to dismiss itself and present
MFMailComposeViewController:
What you have is a circular dependency, since VC1 knows about VC2 and then you let VC2 know about VC1. And When you have circular dependencies, you get all sorts of problems.
You should be using the delegate pattern here. When VC1 presents VC2, it should make itself VC2's delegate. When VC2 is done and wants to dismiss itself, it should let the delegate take care of that operation. In other words, the thing that shows VC2 should be the thing that dismisses VC2. VC2 should be implemented in such a way that it shouldn't know what presented it, only that what presented it will be in charge of dismissing it.
Two similar answers I've given recently:
Pop-up modal with UITableView on iPhone
call method in a subclass of UIView
I've run into the same problem and I'm trying to recall how I fixed it.
You might try calling:
[self.parentViewController dismissModalViewControllerAnimated:YES]
Or could you have your showMailModalView method handle dismissing the current modal view controller before showing the mail composer?