Hi I have the Drop down with values as "One year ", "Two year",...etc.. Ok? also i have two ajax textbox with calender extender . I want to popup alert message if dropdown selected value is "One year" and duration between the both textbox value Means dates not matches. getting what i mean ? please help me.
How can i get this scenario in javascript ??
Algorithm :
1.Get the both date from the text box.
2. The find the epcoch time for each date. //
3. subtract the both dates.
4. subtract_result = 365*24*60*60 // Finding the 1 year timestamp values
5. So, it the difference exceed than above calculation , you could sure that the date is mis matching.
Javascript:
// This is for first date
first = new Date(2010, 03, 08, 15, 30, 10); // Get the first date epoch object
document.write((first.getTime())/1000); // get the actual epoch values
second = new Date(2012, 03, 08, 15, 30, 10); // Get the first date epoch object
document.write((second.getTime())/1000); // get the actual epoch values
diff= second - first ;
one_day_epoch = 24*60*60 ; // calculating one epoch
if ( diff/ one_day_epoch > 365 ) // check , is it exceei
{
alert( 'date is exceeding one year');
}
Related
I was wondering if someone could help me.
I'm very new at ASP I want to format the current date and time as follows:
yyyy-mm-dd hh:mm:ss
But all i can do is the following
Response.Write Date
Can someone help me out please.
Date formatting options are limited in Classic ASP by default, there is a function FormatDateTime() which can format your date is various ways based on the servers regional settings.
For more control over date formatting though there are built in date time functions
Year(date) - Returns a whole number representing the year. Passing Date() will give back the current year.
Month(date) - Returns a whole number between 1 and 12, inclusive, representing the month of the year. Passing Date() will return the current month of the year.
MonthName(month[, abbv]) - Returns a string indicating the specified month. Passing in Month(Date()) as the month will give back the current Month string. As suggested by #Martha
Day(date) - Returns a whole number between 1 and 31, inclusive, representing the day of the month. Passing Date() will return the current day of the month.
Hour(time) - Returns a whole number between 0 and 23, inclusive, representing the hour of the day. Passing Time() will return the current hour.
Minute(time) - Returns a whole number between 0 and 59, inclusive, representing the minute of the hour. Passing Time() will return the current minute.
Second(time) - Returns a whole number between 0 and 59, inclusive, representing the second of the minute. Passing Time() will return the current second.
IMPORTANT:
When formatting date / time values, always store the date / time value first. Also, any needed calculations (DateAdd() etc.) should be applied before attempting to format or you will get unexpected results.
The functions Month(), Day(), Hour(), Minute() and Second() all return whole numbers. Luckily there is an easy workaround that lets you pad these values quickly Right("00" & value, 2) what it does is append 00 to the front of the value then from the right take the first two characters. This ensures that all single digit values return prefixed with a 0.
Dim dd, mm, yy, hh, nn, ss
Dim datevalue, timevalue, dtsnow, dtsvalue
'Store DateTimeStamp once.
dtsnow = Now()
'Individual date components
dd = Right("00" & Day(dtsnow), 2)
mm = Right("00" & Month(dtsnow), 2)
yy = Year(dtsnow)
hh = Right("00" & Hour(dtsnow), 2)
nn = Right("00" & Minute(dtsnow), 2)
ss = Right("00" & Second(dtsnow), 2)
'Build the date string in the format yyyy-mm-dd
datevalue = yy & "-" & mm & "-" & dd
'Build the time string in the format hh:mm:ss
timevalue = hh & ":" & nn & ":" & ss
'Concatenate both together to build the timestamp yyyy-mm-dd hh:mm:ss
dtsvalue = datevalue & " " & timevalue
Call Response.Write(dtsvalue)
Note: You can build the date string in one call but decided to break it down into the three variables to make it easier to read.
How Can I Format Date
Example of Parsing a Date String (Answers provide approaches to taking a date string format and parsing it to a valid Date variable).
Format the date of the previous day format yyyymmdd with VBScript (Example of why storing date / time before performing formatting is important)
VBScript ISO8601 (Example of functions to construct an ISO 8601 compliant date string)
As per MDN
"Date objects are based on a time value that is the number of milliseconds since 1 January, 1970 UTC."
Then why does it accept negative values ?
Even if it did shouldn't negative value mean values before Jan 1, 1970 ?
new Date('0000', '00', '-1'); // "1899-12-30T05:00:00.000Z"
new Date('0000', '00', '00'); // "1899-12-31T05:00:00.000Z"
new Date('-9999', '99', '99'); // "-009991-07-08T04:00:00.000Z"
What is happening ?
Update
For some positive values , the year begins from 1900
new Date(100); // "1970-01-01T00:00:00.100Z" // it says 100Z
new Date(0100); // "1970-01-01T00:00:00.064Z" // it says 64Z
new Date("0006","06","06"); // "1906-07-06T04:00:00.000Z"
Also note that, in the last one, the date is shown as 4 which is wrong.
I suspect this is some sort of Y2K bug ?!!
This is hard and inconsistent, yes. The JavaScript Date object was based on the one in Java 1.0, which is so bad that Java redesigned a whole new package.
JavaScript is not so lucky.
Date is "based on" unix epoch because of how it is defined. It's internal details.
1st Jan 1970 is the actual time of this baseline.
since is the direction of the timestamp value: forward for +ve, backward for -ve.
Externally, the Date constructor has several different usages, based on parameters:
Zero parameters = current time
new Date() // Current datetime. Every tutorial should teach this.
The time is absolute, but 'displayed' timezone may be UTC or local.
For simplicity, this answer will use only UTC. Keep timezone in mind when you test.
One numeric parameter = timestamp # 1970
new Date(0) // 0ms from 1970-01-01T00:00:00Z.
new Date(100) // 100ms from 1970 baseline.
new Date(-10) // -10ms from 1970 baseline.
One string parameter = iso date string
new Date('000') // Short years are invalid, need at least four digits.
new Date('0000') // 0000-01-01. Valid because there are four digits.
new Date('1900') // 1900-01-01.
new Date('1900-01-01') // Same as above.
new Date('1900-01-01T00:00:00') // Same as above.
new Date('-000001') // 2 BC, see below. Yes you need all those zeros.
Two or more parameters = year, month, and so on # 1900 or 0000
new Date(0,0) // 1900-01-01T00:00:00Z.
new Date(0,0,1) // Same as above. Date is 1 based.
new Date(0,0,0) // 1 day before 1900 = 1899-12-31.
new Date(0,-1) // 1 month before 1900 = 1899-12-01.
new Date(0,-1,0) // 1 month and 1 day before 1900 = 1899-11-30.
new Date(0,-1,-1) // 1 month and *2* days before 1900 = 1899-11-29.
new Date('0','1') // 1900-02-01. Two+ params always cast to year and month.
new Date(100,0) // 0100-01-01. Year > 99 use year 0 not 1900.
new Date(1900,0) // 1900-01-01. Same as new Date(0,0). So intuitive!
Negative year = BC
new Date(-1,0) // 1 year before 0000-01-01 = 1 year before 1 BC = 2 BC.
new Date(-1,0,-1) // 2 days before 2 BC. Fun, yes? I'll leave this as an exercise.
There is no 0 AC. There is 1 AC and the year before it is 1 BC. Year 0 is 1 BC by convention.
2 BC is displayed as year "-000001".
The extra zeros are required because it is outside normal range (0000 to 9999).
If you new Date(12345,0) you will get "+012345-01-01", too.
Of course, the Gregorian calendar, adopted as late as 1923 in Europe, will cease to be meaningful long before we reach BC.
In fact, scholars accept that Jesus wasn't born in 1 BC.
But with the stars and the land moving at this scale, calendar is the least of your worries.
The remaining given code are just variations of these cases. For example:
new Date(0100) // One number = epoch. 0100 (octal) = 64ms since 1970
new Date('0100') // One string = iso = 0100-01-01.
new Date(-9999, 99, 99) // 9999 years before BC 1 and then add 99 months and 98 days
Hope you had some fun time. Please don't forget to vote up. :)
To stay sane, keep all dates in ISO 8601 and use the string constructor.
And if you need to handle timezone, keep all datetimes in UTC.
Well, firstly, you're passing in string instead of an integer, so that might have something to do with your issues here.
Check this out, it explains negative dates quite nicely, and there is an explanation for your exact example.
Then why does it accept negative values ?
You are confusing the description of how the data is stored internally with the arguments that the constructor function takes.
Even if it did shouldn't negative value mean values before Jan 1, 1970 ?
No, for the above reason. Nothing stops the year, month or day from being negative. You just end up adding a negative number to something.
Also note that, in the last one, the date is shown as 4 which is wrong.
Numbers which start with a 0 are expressed in octal, not decimal. 0100 === 64.
Please have a look at the documentation
Year: Values from 0 to 99 map to the years 1900 to 1999
1970 with appropriate timezone: new Date(0); // int MS since 1970
1900 (or 1899 with applied timezone): new Date(0,0) or new Date(0,0,1) - date is 1 based, month and year are 0 based
1899: new Date(0,0,-1)
My data looks like this:
[{ x="2013-06-01", y=3}, { x="2013-07-01", y=7 }, { x="2013-08-01", y=3 }]
Chart x-axis is formatted as so:
chart.xAxis
.axisLabel('Date')
.tickFormat(function(d) { return d3.time.format('%b %Y')(new Date(d)); })
;
%b returns May, Jun, July respectively for the dates 2013-06-01, 2013-07-01, 2013-08-01
Why is it returning the previous month, and how can I fix it?
EDIT: If the date is formatted as 2013-06-02, it will return the correct month... does someone know what is happening to cause this?
#Amelia is correct it's because of timezone difference and because Date defaults to 24:00:00 if you don't specify a time. So, in case of EDT, which is -4:00, you lose 4 hours which puts you in the previous day (May 31 2013 20:00:00) and because the days in your dates are 01, this puts you in the previous month.
To bypass this you could append a time to your date if that is allowable in your case.
chart.xAxis
.axisLabel('Date')
.tickFormat(function(d) {
d = d.split('-')
// Create new date by using new Date(year, month, day, hour, second, ms)
// Subtracting 1 is necessary since Javascript months are 0 - 11.
return d3.time.format('%b %Y')(new Date(d[0], +d[1] - 1, d[2], 12, 0, 0));
});
Here is a working Fiddle
possible duplicate:
Convert TimeSpan.TotalMilliseconds to datetime and format it as hour:minute
[edited]
also
Sent = u.DateSent,
Reply = u.DateReply,
ResponseTime = Reply - Sent
});
which give me the time different between the two datatime is 10 days, but i want to calculate the hour and minute during the time interval,(for example if datesent is 09/02/2011 2:00 pm , and dateReply is 09/02/2011 4:30 pm , then the response time should be 2:30 ) still havent figure this out, anyone has idea, either format it in linq or do it over the view page?
You can change the ResponseTime type to TimeSpan and than do the following:
DateTime dateSent = new DateTime(2012, 10, 30, 2, 0, 0);
DateTime dateReply = new DateTime(2012, 10, 30, 4, 30, 0);
TimeSpan difference = dateReply - dateSent;
Console.WriteLine("{0}:{1}", difference.Hours, difference.Minutes);
I just put the Console.WriteLine so you could see how I'm getting the Hour and Minute just like the way you want. From milliseconds, you could create a new TimeSpan passing the milliseconds to the constructor, and again you could get the Hour/Minute in this newly created TimeSpan.
I just put the hardcoded dates so you could actually see the usage based on your example.
I hope it helps.
I have the Drop down with values as "One year ", "Two year",...etc.. Ok? also i have two ajax textbox with calender extender . I want to popup alert message if dropdown selected value is "One year" and duration between the both textbox value Means dates not matches. getting what i mean ? please help me.
Algorithm :
1.Get the both date from the text box.
2. The find the epcoch time for each date. //
3. subtract the both dates.
4. subtract_result = 365*24*60*60 // Finding the 1 year timestamp values
5. So, it the difference exceed than above calculation , you could sure that the date is mis matching.
// This is for first date
first = new Date(2010, 03, 08, 15, 30, 10); // Get the first date epoch object
// document.write((first.getTime())/1000); // get the actual epoch values
second = new Date(2012, 03, 08, 15, 30, 10); // Get the first date epoch object
//document.write((second.getTime())/1000); // get the actual epoch values
diff= second - first ;
one_day_epoch = 24*60*60 ; // calculating one epoch
if ( diff/ one_day_epoch > 365 ) // check , is it exceei
{
alert( 'date is exceeding one year');
}