I'm using toLocalizedTime to output a date, as below
<span tal:content="python:here.toLocalisedTime(date.get('start_date'))"/>
This outputs eg. 2007/08/02, I'm just curious as to how one would alter the output so that it reads 02/08/2007
I'm not having much luck finding much info on toLocalizedTime, would someone point me in the right direction?
This depends on whether you have English selected as the site language (Site Setup >> Language). If so, then the default settings are used. You can change the defaults by dropping down into the ZMI, then into 'portal_properties', then 'site_properties'. The fields to change are either 'localTimeFormat' or 'localLongTimeFormat' depending on whether you pass in 'long_format=1' to the toLocalisedTime function.
If on the other hand, you have translations set up, the format may instead be pulled from the translation file for the locale selected. I'm not sure what is the easy way to change the format in this case (other than switching the site back to English). I guess you can register your own translation file but I've never needed to do that so you're going to have to look up the details.
Date string formatting follows the Python rules (http://docs.python.org/library/time.html#time.strftime).
Perhaps even more detail than you need:
here.toLocalizedTime()
is defined in the plone browser view at...
CMFPlone/browser/ploneview.py
which looks up the 'translation_service' utility, to call its 'ulocalized_time' function, defined at...
CMFPlone/TranslationServiceTool.py
which itself calls the 'ulocalized_time' function defined at...
CMFPlone/i18nl10n.py
As always, you can learn interesting things by grepping the source code ;-)
For an up to date answer for Plone 4.3 (after going through the source code)
These fields are now in the registry found at:
http://localhost:8080/yoursite/portal_registry
Then filter on "i18nl10n", which should give you the 4 fields you need to change.
Related
Is the property "health.config.enabled" still valid and being processed in current Spring Cloud?
If yes, where in the code it is being done?
The property is in the current official documentation and has worked well for me so far (in cloud clients).
But as a whole string, it cannot be found anywhere in the current source code (besides the doc source).
For me as a beginner, it was easy to find in the old version of ConfigClientAutoConfiguration.java
Recent version of ConfigClientAutoConfiguration.java does not contain that whole property name, although I guess it's still being processed but in a more abstract way that I don't understand yet. Thus I'd appreciate even a hint in the form of "what used to be done on line "#ConditionalOnProperty(value = "health.config.enabled", matchIfMissing = true)" before is now roughly done on line XY".
Thanks.
It is replaced by #ConditionalOnEnabledHealthIndicator("config") (see here).
From the javadoc for that annotation
Blockquote
#Conditional that checks whether a default health indicator is enabled. Matches if the value of the management.health.<name>.enabled
So the new property is management.health.config.enabled
I created a simple RME for TTeeGrid, a descendant perhaps of TGrid in Firemonkey. As shown below, the data are displayed at design time but not at runtime except the headers.
I've been breaking my head over this for weeks already but not luck.
Let me know if you need more details but what you see in the image are all you get.
I just need help to have the data displayed at runtime as shown in the design time.
UPDATE 1
This issue is not the case with TPrototypeBindSource. The data shown in the design time are displayed at runtime. Something is wrong somewhere.
I've never used the TeeGrid before, but the following worked fine
first time for me in Delphi Tokyo:
Download the TeeGrid trial from Steema.Com & install.
Create new multi-device app and place a TeeGrid and a FDMemTable on the form.
Load FDMemTable1 with the file Parts.Fds from the Delphi samples Data directory. Note, I did not then create any FieldDefs as I mentioned in my comment earlier as what I'm describing works without them.
Set the DataSource property of TeeGrid1 to FDMemTable1. TeeGrid1 immediately
creates columns for each of the Parts fields and populates them with data - see
screenshot below. I don't ordinarily include screenshots but in this case thought
I would as what I got was so clearly at odds with what you've reported.
Your TeeGrid etc are obviously more complicated than mine. so the best I can
suggest is that you backtrack to step 2 and see if you can replicate my result
with your data (either at design time or run time). It might be worth loading
your FDMemTable with some data at design time, as my impression is that live bindings
is less grief-prone when the datasource has some data.
Incidentally, fwiw the results of my own attempts to set up live bindings even with a regular TGrid have been rather patchy, until I discovered that instead of messing with the LB components myself, simply starting with a fresh TGrid, right-clicking on it and leaving the Live Bindings Wizard
to do its stuff consistently works fine.
I'm pretty sure about the answer to this, but I'm trying a variety of things to get a very stubborn project to work. One idea was to try to run code through a control without defining it on a form.
So, for example, my original code looked like this:
frmProcess.MyViewer.MaxPageSize = 100
frmProcess.MyViewer.ResetPages
frmProcess.MyViewer.AddPageToView "C:\TestPage1.txt"
I've changed it to:
Dim objViewer As MyViewer
objViewer.MaxPageSize = 100
objViewer.ResetPages
objViewer.AddPageToView "C:\TestPage1.txt"
I get an error window with "Run-time error '91': Object variable or With block variable not set".
But there doesn't seem to be a way to 'set' this control. Is this just impossible, or is there another way to do it that doesn't require a form?
EDIT: I ended up abandoning this entire path of activity, as an alternate solution was found that got around the problem I was having with this form freezing. I don't want to delete this question in case someone else comes along and can benefit from the answers, which are potentially useful.
Try this on a form.
Dim objViewer As MyViewer
Set objViewer = Controls.Add("MyViewer", "MyViewer1")
objViewer.MaxPageSize = 100
objViewer.ResetPages
objViewer.AddPageToView "C:\TestPage1.txt"
I've had similar situations in the past. If all else fails and you have to use a form you can do something crude like
1) Set the .Left property of the control to a negative number (like -10000) so the control doesn't appear on the form, the user can not see it
2) Make the entire form not visible..
ActiveX controls normally expect a number of services from their containers, for example persistence. They are also "packaged and marked" in ways that set the kinds of instantiation they support.
See Introduction to ActiveX Controls.
While it is perfectly possible for a control to be created in such a way as to make many of the available services optional, most controls are created from template code that requires a number of them. And most controls that are "visible at runtime" are going to require container services.
However that doesn't mean a control can't be designed to support containerless instantiation. A well known example of such a control is Microsoft Script Control 1.0 (MSScriptControl.ScriptControl) which can be used either way.
IS there a way to add/initate a comment ( e.g. $dom->createComment ... ) such that it comments out an entire block of xml tags. Basically I want to turn-off the content between the comment.
For example, it would look like this:
<TT>
<AA>keep</AA>
<!-- comment to blocking
<BB>hideme1</BB>
<CC>hideme2</CC>
-->
<DD>d's content is good</DD>
</TT>
Actually this question is a pre-cursor to my attempt to figure-out a method to be able to markup/label/identify the changes to an xml files in support of new client software functionality, but be able to have the ability to remove / back-out these xml changes in the rare event the client needs to fall back to the previous software version (and no I can't just simply point back to the original xml file because the client is allowed to make minor modifications to existing node text values). This is all going to be controlled via a perl script and LibXML's core modules (I can't use modules the client doesn't have).
So basically I've identified three possible types of xml changes as a result of new client sw functionality:
1.) ADD new element node(s) (typically to support new sw functionality)
2.) DELETE element node(s), or blocks of (would be rare, but never-the-less a possibility)
3.) CHANGE node text values (rare, but the new sw may require a new value)
For all three types, the client needs the ability to back out the changes. One thing I was thinking to use is ATTRIBUTES since the existing xml files don't use them. For example, for an ADD change type, I could include an atribute like 'ADD="sw version 4.1"' . This way if it needs to be removed, I could just simply have the perl script find those attribute strings and delete them (using LibXML methods). Same thing with CHANGE change type - I could use an attribute like CHG="newvalue_oldvalue", then again use straight perl (or LibXML) to switch back the value based on the contents of the attribute. The DELETE change type is giving me a problem though (as welll as the others lol!). I want to be able to "keep" the deleted lines in the xml file soley for the purposes if the sw falls back a version (at some late point the perl script could eventually cleanup/delete them).
I know this is a lot, I'm new to LibXML (but not to perl). I was just wonder if any of you have any thoughts as to how to go about it or seen anything resembling this kind of request ... I'd be grateful for any kind of advice! Thank you...
I have 2 servers which I though were synchronized (dev and live) but the "News System" (extension key "news") makes something different.
In the dev server this line
<f:format.date format="%A">{newsItem.datetime}</f:format.date>
outputs "Freitag", as expected (Thats friday in German)
But in the Live Server, it outputs %AM. Which is even weirder is that l (alone, without %) outputs "Friday" in English.
I've checked all the configurations I've seen and I cant seem to find where the difference between the systems is.
Any idea?
TYPO3 is using DateTime::format (http://de2.php.net/manual/en/datetime.format.php) to format the date. This method is using the same syntax of date() which is not using locales, so all output is english.
The only thing I can not explain is why your dev enviroment accepts %A to render the date. Are there different PHP-Versions? Which TYPO3 Version are you using? Get a look at /typo3/sysext/fluid/Classes/ViewHelpers/Format/DateViewHelper.php, you will get the answer there.
I just solved it! Turns out I had 4.7.7 in my live server, and that doesnt support stftime.
Funny, I never thought that such an important feature would be added in an 4.7.X update...