My data contains same value for a particular column.
My requirement is to merge the data rows for that particular column alone in detail band.
Is it possible in jasper reports.
please help.
Thanks & Regards,
Prasanna
You can make another group, other than Detail and set the Group Expression to the same field you want.
For example, if I want to group on Country, and show Cities in each country. In "Country" Group Expression. I would write:
$F{countryField}
Related
Now it is a report with a tablix in which the records are like every row has some details rows under it. and the details row can have one or more records based on the main tablix rows
To elucidate the problem, plz have a look
Did some search here and there, but not able to figure out how to accomplish this.
Sub-reports inside the tablix cell, but how will it keep the track of the current row
One thing more : Do I need to create two separate datasets for this and bind accordingly or write query as a single dataset and do some grouping ?
any ideas !
P.S: SSRS r2 environment, native mode reports for web application
You can achieve this with one Dataset and one Tablix.
The Dataset will have all the columns in the report, with multiple rows for each BIL value.
The Tablix will have four rows and one group based on BIL.
The first row will be the Tablix header row, with the main column header details.
The next two rows will be group header rows. The first row will contain the group details, BIL, No Bayar, etc. The second row will contain the detail row header details.
The last row will be the detail row which will contain the COL1 and COL2 detail values.
You will see something like this (you'll need to fill in the TextBox details as appropriate):
create report with subreport will solve your problem
you can create one report with one dataset with (BIL NoB NoW Est TotalXYZ) columns.
Now link that subreport with the BIL
Now link subreport with main report the BIL (FK)
Hope this help
I have a report that has 3 columns and it is grouped by a value that i display in the group header. The report is setup to run down then across.
If the details span across multiple columns, how do I repeat that group header on the next column.
I have already checked "repeat group header on each page" in the group expert.
I have already checked "format groups with multiple column" in the Layout tab of the details section.
It will not let me insert a text object in the group header of each column.
Not sure how to do this. I could write a formula to only show at the top of each column, but not sure if there is a function to find out when the second column has started.
edit
What i want is below
Group Header Text Group Header Text Group Header Text
Detail Values Detail Values Detail Values
Detail Values Detail Values Detail Values
I would like to have the Group Header Text show at the top of each column. Doesn't matter if its the start of a new group or in the middle of the group.
thanks.
okay, I have your solution, the field, that you are grouping by , just place it on to the page header and it will repeat itself on every page until the columns of that group are finished.
Lets say you are grouping by Employee Names, just put the Employee Name field on to the page header and it should solve the issue, I jsut tried it and it worked, thanks.
There is Previous() function available in formulas that allows to show-hide a Text Object based on the change of specific field value from previous to current record.
Is this what are you looking for? Can you edit you question drawing a sample af what you have and what you want?
Is it possible to hide a row in a crystal reports crosstab?
I have two rows that are only used to calculate a third row and I would like to hide them so only the result is visible to the user.
I have similar problem. I want to display only rows that have specific values and ignore all others.
Here was my solution:
Open Cross-Tab Expert. In Cross-Tab under Rows select your row which should be conditional suppressed. Then select Group Options. This will open Cross-Tab Group Options dialog. Go to Specified Order and add filter. In this case, rows that match your criteria will be displayed in your cross-table all other rows will be placed in one row "Others". Then select tab Others and check Discard all others.
Not directly. I recommend grouping by a custom formula.
For example, let's say you have a crosstab that is grouped by StoreName. StoreName has values groups "A", "B", and "C". You want to combine "B" and "C".
Make a new formula field. Call it StoreName_Combined. In your new formula, enter:
If {StoreName}="B" or {StoreName}="C" then "B+C" else {StoreName}
In your crosstab, use StoreName_Combined instead of StoreName.
Edit
If you look around a little, you may also think about using Cross-Tab Expert->Group Options->Options->Use a Formula as a Group Name, but I couldn't get it to work. The rows stay separate, they just have the same name, which doesn't really help.
Can anyone please tell me how to group crosstabs w.r.t report level group. i.e. in my problem i am using three crosstabs in details band.....and i want this page to be grouped by coutryname. eg.if country=Australia print three crosstabs and if country changes to india print three crosstab on the next page
Use a subdataset for your Crosstab, which take the country as parameter.
In the main report, call for a list of the country you want to display. This will produce one detail band for each country (ex: $F{Country})
In the detail band use the value of the country field ($F{Country}) as parameter for the subdataset you use in your cross tab.
Ok, this might be a weird request, but is it possible to essentially flatten my dataset inside a crystal report?
I have a datatable in C# that was created with a join, so when it hits the report its 2 records. Most of the columns have identical data, with the last few displaying a different address.
Instead of printing the detail section multiple times with mostly similar data, I need to display 1 'record' with the common data printed once, and each records address arranged next it. As in, all the common fields displayed in one area, and then next to that the address fields from the record where 'AddressType = 1', then next to that the address fields where 'AddressType = 2'
Is this a subreport thing? Because even with subreports I can't get it to only print 1 detail section with the data from just the first record.
Is this even possible with crystal? For long drawn out reasons, I can't flatten the data before it gets to the report.
Ok, someone here in the office showed me the way, so I'll put this out there.
Given data with cols A,B,C all common and D,E different across multiple rows, this is how I 'flattened' the dataset in crystal:
Create a group based on col A, and put A,B,C inside that group header - get rid of the details section entirely
Create a subreport in the group header for each row of data, in my case 2 subreports
Inside each subreport, put fields D,E. Important: There are NO links for these subreports!
For each subreport go into the Select Expert and create a condition that shows only 1 particular row of data. This conditional will have the same field for each subreport, but different values. In my case it was AddressType='A', and AddressType='B'
This will produce 1 report, with A,B,C listed once, and D,E listed once for each subreport(once for each row of data)
This was confusing, time consuming, and I hate crystal reports now more than ever.
It would be pretty ugly, but you could add a group for each common field in Group Expert and then display the data for the common fields in the last group header. So if your common fields are field1 through field5, you would create five groups and put all five fields in the group header of field5. Then you would put the unique address fields (call them field field6 through field8) in the details section.
Now the trick is getting everything to line up correctly. You can set "underlay following sections" on the group header for field5; this will cause field1 through field5 to "fall down" into the details section. You just need to make sure that field6 through field8 are all to the right of field1 through field5 so the text does not overlap.
Now, if you want the two address records to print horizontally, I think you will need a subreport with multiple columns for that. But the same principle applies -- just make sure the subreport is to the right of field1 through field5 so the data doesn't overlap.
Have you tried the suppress if duplicated option on each non-address field?
Otherwise, you could group by the common id, put the common fields in that header, and then display the multiple addresses in the details section.
Or, you could remove the addresses from the datasource and use a subreport to fetch this data for each record. This would bypass the join and be the slowest option performance wise, due to having to select the addresses for each record.
Ok, firstly let's see if I understand this right :
You want a report that would be in the format
MainDetails Address(type1)
MainDetails Address(type2)
to instead be in the format
MainDetails Address(type1) Address(type2)
?
Assuming there are only two address types, you can do the following :
1) Group by Main details (whatever the unique entry is
2) Put the address details in the group header next to them, on the right
3) Also put the address details in the details section, but positioned as if they were in the Address(type2) column positions, so it looks like :
GH MainDetails Address
D.......................................Address
4) Next, add a sort to the report on the AddressType field, so that AddressType=1 shows first.
5) Add a conditional suppression formula to the Details section saying {AddressType=1}
6) Using the Section Expert, in the Group Header tick the 'underlay following sections' box
This should work as long as the number of addresses is either 1 or 2.