Is there a way to scroll through a document without exiting isearch mode? I have isearch-allow-scroll set to t, but that limits my scroll range to make sure the current isearch match is visible in the buffer. Ideally, I would like to be able to scroll with the mousewheel, having all the isearch matches highlighted as I scroll.
I am aware of M-x occur, but a lot of the time simply being able to scroll in isearch mode would be more efficient (in addition, M-x occur does not play well with folding mode).
There's also highlight-regexp if you want. It will highlight regexps and you can scroll as usual.
It looks like what you want is not possible in general. From the documentation inside isearch.el:
;; scrolling within Isearch mode. Alan Mackenzie (acm#muc.de), 2003/2/24
;;
;; The idea here is that certain vertical scrolling commands (like C-l
;; `recenter') should be usable WITHIN Isearch mode. For a command to be
;; suitable, it must NOT alter the buffer, swap to another buffer or frame,
;; tamper with isearch's state, or move point. It is unacceptable for the
;; search string to be scrolled out of the current window. If a command
;; attempts this, we scroll the text back again.
In other words, it's not possible to scroll far enough that the search string moves out of the window.
Try Icicles search -- for example, icicle-occur (bound to C-' in Icicle mode).
Nothing prevents you from scrolling as far as you like with the mouse etc.
Icicles search is a different kind of incremental search. icicle-occur is like an incremental occur: as you edit your input in the minibuffer the lines are filtered by that input.
Search hit candidates are completion candidates (e.g., appear in *Completions*). You can navigate among hits in the searched buffer using C-down, or you can jump directly using C-RET or C-mouse-2.
Related
I am trying to get out of evil mode, but one thing that is causing problems is that the forward incremental search places my cursor at the end of the match instead of the beginning. I very rarely want to have my cursor in the middle of the match which results in unnecessary keypresses to reposition the cursor. Is there a way to make the forward incremental search place the cursor at the beginning of the match instead of the end?
You question is addressed specifically in the Position of the Cursor after Searching
section of the IncrementalSearch page on Emacs Wiki. In particular, it shows you how to use isearch-mode-end-hook to get the behavior you want.
I suppose you can use defadvice to isearch-exit.
(defadvice isearch-exit (after move-to-match-beginning activate)
(when (and isearch-forward isearch-success)
(goto-char (match-beginning 0))))
Is it possible to let Emacs have the cursor be moved off-screen, like most GUI text editors work? This is one of the biggest things that bothers me when I use Emacs over any GUI editor. When I scroll down, the cursor is "pushed forward" by the top of the buffer.
I had previously thought that this was completely impossible, because this is hard-wired into the architecture of Emacs, but then I saw multiple-cursors, which does exactly this for the secondary cursors (assuming you prevent the scrolling functions from acting on the secondary cursors). Is it maybe possible to use multiple-cursors to have the main cursor in some hidden buffer, and the effective cursor being what I actually edit with? Or maybe some other clever trick? Or maybe my Googling has failed me and this is really already possible without any magic?
There is a new package available on GNU ELPA called scroll-restore that attempts to remedy this problem. So far, I have encountered a few bugs, but the package seems to work as-advertised for the most part.
You can test it out by installing it with
M-x package-install RET scroll-restore RET
After the package is installed, you can enable the minor mode with
M-x scroll-restore-mode
Personally, I am binding it to the Scroll Lock key because it seems so incredibly apropos! This is what I am adding to my init file:
(require 'scroll-restore)
(scroll-restore-mode 1)
;; Allow scroll-restore to modify the cursor face
(setq scroll-restore-handle-cursor t)
;; Make the cursor invisible while POINT is off-screen
(setq scroll-restore-cursor-type nil)
;; Jump back to the original cursor position after scrolling
(setq scroll-restore-jump-back t)
;; Toggle scroll-restore-mode with the Scroll Lock key
(global-set-key (kbd "<Scroll_Lock>") 'scroll-restore-mode)
This is a direct copy of an answer posted here: https://emacs.stackexchange.com/a/2273/93
Strictly, speaking you can't move the cursor offscreen, because the underlying C code won't let you do it.
This said, I suspect that your problem can be fixed. Basically, there are 2 aspects:
you don't like the way things look when "the cursor is pushed forward". You could work around that by (temporarily) making the cursor invisible.
you want to "jump back" to the pre-scrolling position as soon as you issue a non-scrolling command. There's probably some package out there that does it for you, but you can do it yourself with some pre-command-hook hacking.
BTW, I'd welcome patches in Emacs which provide some of that functionality. I hate the "auto jump-back" behavior of other editors, but it would be good to record the "pre-scroll" position and then offer a way to jump back to it.
Judging by the context and description of your problem, it looks like you want to browse the buffer while preserving your place of editing. There are at least two tricks for that purpose: marks/registers and splitting in two windows.
https://stackoverflow.com/a/3777598/308668 describes the Emacs' registers that act like Vim's marks. You can check in your place in the file with keying C-x r SPC a (a being a letter of your choice) and you can always come back with C-x r j a.
Some sort of automation is achieved by an external script (goto-last-change.el), described here: https://superuser.com/a/184402/49046.
Alternatively, split the window in two with C-x 2. The newly split windows both show the same location and you can use the other to explore. C-x 0 closes a window when you're done.
When I press ctrl+left-mouse-button in Emacs, I get the mouse buffer menu. This is my favourite way of switching buffers, but the list of buffers doesn't have to be too long before it re-organises the list into sub menus (fundamental, LISP, others etc...). I really hate this because I find it much harder to find the buffer I'm looking for.
My question is: How can I set the number of items in the mouse buffer menu that emacs will show before it breaks the menu into submenus? (I want to increase it, obviously!)
The following two variables give you some control over this:
mouse-buffer-menu-maxlen
mouse-buffer-menu-mode-mult
My interpretation is that the latter is the maximum number of buffers in a given major mode before that mode gets its own sub-menu, and the former is the maximum number of buffers allowed in any sub/menu before it is split into multiple menus.
setq as appropriate, or
M-x customize-group RET mouse RET
full code with details to add to .emacs file is below
also note that mouse-buffer-menu-mode-mult takes precedence
to evaluate the below and see effect immediately, highlight and type M-x eval-region or put cursor inside each () and type M-C-x
;; "ctrl - left click" buffer menu: increase number of items shown
;; set max length of this list. default 20. see next.
(setq mouse-buffer-menu-maxlen 30)
;; set # buffer in a mode before grouping begins. takes precedence over previous
;; set to 1 to always group by mode. default 4
(setq mouse-buffer-menu-mode-mult 8)
I personally keep all lines under 80 characters, but I also work on projects in teams where other programmers don't care about line length.
I love using whitespace-mode, but the long line visualization is really annoying when I'm working on projects where I shouldn't interfere with the long lines. It seems like it should be easy to turn off the long line visualization---I hit m-x global-whitespace-toggle-options l, and then can hit m-x global-whitespace-toggel-options ? to confirm that the "long-line visualization" is turned off. But long lines are still highlighted. I kill buffers and reload them, and highlighting is still there. I'm definitely using global, not local, whitespace-mode.
Why can't I turn off the long line visualization?
The last time I customized whitespace-mode, I noticed that my changes to the settings didn't have any effect in buffers that already existed; try recreating the buffer, or leaving and reentering whitespace-mode. In case you don't already know, you can use M-x customize-group whitespace to turn off that particular option entirely, rather than doing it manually.
Edit: Specifically you want to customize the whitespace-style variable. This lets you turn on and off individual styles. In this case you should turn off the ones labelled "(Face) Lines" and "(Face) Lines, only overlong part". The former changes the face of the whole line when it is overly long, while the latter only changes the face of the part that extends past the threshold.
(Other options in this group define the faces that whitespace-mode will use to highlight the styles you've turned on, the regexes it uses to identify certain situations, etc, but usually you only care about whitespace-style).
Set whitespace-line-column to a higher value (default is 80), so the highlighting of long lines doesn't kick in:
(setq whitespace-line-column 250)
I'm assuming that you already have whitespace-mode activated somewhere in your init.el or similar. If so, you can adapt duma's comment above, and either
Edit the elisp that sets whitespace-style to remove lines-tail. E.g., Emacs Prelude sets
(setq whitespace-style '(face tabs empty trailing lines-tail))
Simply change that to
(setq whitespace-style '(face tabs empty trailing))
If you don't want to directly edit that elisp, but rather override it later with your own code, do something like
(setq whitespace-style (delete 'lines-tail whitespace-style))
Unfortunately, if running Prelude with auto-loaded buffers (using something like Emacs Desktop), the initial setting will take precedence: for each buffer on which you want to see whitespace-style displayed as directed, you must [1]
kill the buffer
re-open the buffer
[1]: Note to OP: if there's another way to reload a buffer, please edit or comment this answer. I was hoping to find something like M-x reload-buffer but am not seeing anything like that with C-h a buffer.
Notepad++ has a convenient feature: if you select a word in your text (not necessarily a keyword), the word is highlighted throughout the text. Can this be done in Emacs as well? And if so, how?
It doesn't necessarily have to work exactly like Notepad++ (i.e., via selection); ideally, I would like to set up a key binding that causes all occurrences of the word under cursor to be highlighted.
It would be great if the highlights were permanent, i.e., moving point away from a highlighted word should not cause the highlight to be removed.
Also, it would be useful if there was a solution that made it possible to navigate between highlights (using custom key bindings).
The hi-lock suggestions are good. I think it's easier to use the M-x versions, though:
M-x highlight-regexp RET <REGEXP>
M-x highlight-phrase RET <REGEXP>
highlight-phrase is just a bit of sugar around highlight-regexp that ignores case and translates a space in the regex to match arbitrary whitespace. Handy.
Maybe highlight-symbol.el at http://nschum.de/src/emacs/highlight-symbol/ is what you are looking for:
Type C-s, then type the current word or type C-w. As a bonus, you can now hit C-s again to search for the word.
This is called incremental search.
What I use is idle-highlight
http://www.emacswiki.org/emacs/IdleHighlight
M-x idle-highlight sets an idle timer that highlights all occurences in the buffer of the word under the point.
To enable it for all programming modes, in ~/.emacs.d/init.el:
;; highlight words
(add-hook 'prog-mode-hook (lambda () (idle-highlight-mode t)))
Light-symbol will highlight whatever symbol point is over.
Alternately, you can use occur, which lists all lines matching a regexp. It's useful to quickly see all functions in a class.
Nobody mentioned symbol-overlay mode. It's basically a better rewrite of highlight-symbol-mode. "Better" as in, lacks bugs of original highlight-symbol (such as, temporary highlight getting stuck, or the temporary highlight disappearing for moving inside the highlighted word; or not being able to highlight symbols like *), better integrated, and maintained. See "Advantages" paragraph of its README.
You can install it as usual, with M-xpackage-install (make sure to update package list beforehand with package-list-packages). For reference, at the bottom I attached code I use to enable the mode and disable a few of the more advanced features which you may or may not want.
Notepad++ has a convenient feature: if you select a word in your text (not necessarily a keyword), the word is highlighted throughout the text. Can this be done in Emacs as well? And if so, how?
Once you enable overlay-symbol, occurrences on the screen will be shown for every word that you put cursor upon after a timeout (timeout by default is 0.5s, can be configured with symbol-overlay-idle-time variable). If a word don't get highlighted, this means there's just one match on the screen (the one you put cursor upon), hence there's no need to highlight it.
It would be great if the highlights were permanent, i.e., moving point away from a highlighted word should not cause the highlight to be removed.
To highlight the word under cursor permanently there's a function symbol-overlay-put. To unhighlight call it once again.
In my config example it's bound to Logo+` key.
(require 'symbol-overlay)
(defun enable-symbol-overlay-mode ()
(unless (or (minibufferp)
(derived-mode-p 'magit-mode)
(derived-mode-p 'xref--xref-buffer-mode))
(symbol-overlay-mode t)))
(define-global-minor-mode global-symbol-overlay-mode ;; name of the new global mode
symbol-overlay-mode ;; name of the minor mode
enable-symbol-overlay-mode)
(global-symbol-overlay-mode) ;; enable it
(global-set-key (kbd "s-`") 'symbol-overlay-put)
(setq symbol-overlay-ignore-functions nil) ;; don't ignore keywords in various languages
(setq symbol-overlay-map (make-sparse-keymap)) ;; disable special cmds on overlays
This may not be as nice as what you were hoping but if you put
(global-hi-lock-mode 1)
in your .emacs file then you can type C-x w h REGEX <RET> <RET> to highlight all occurances of REGEX, and C-x w r REGEX <RET> to unhighlight them again. Again, not as elegant as you'd probably like, but it'll work.
Try http://www.emacswiki.org/emacs/msearch.el
All occurences of the text selected with the cursor are highlighted.
You have to drag over the string which you want to highlight. That enables you to easily change the selection without changing the highlight.
If you want to preserve the highlighting of a string you can freeze it.
You can enslave a buffer to another buffer. Text selected in the master buffer will also be highlighted in the slave buffer. That is useful for comparing buffers.
It is also useful for taking notes in one buffer while you investigate the text in another one. You can have a collection of keywords in the notes buffer. Drag over such a keyword and its occurences in the investigated text will be highlighted.
I am using this stuff for years now. I added the freezing quite recently. So, maybe something is broken. If this is the case leave me a note on http://www.emacswiki.org/emacs/msearch or here.
Check Interactive Highlighting
Should be:
C-x w h word <RET> <RET>
Try iedit. It highlights the word at point and lets you edit all occurrences of it easily. With an additional keystroke (C-'), it hides all the lines without that word in it. Very handy!
Commands in library highlight.el
let you (un)highlight text matching a regexp (in this case a symbol), using overlays or text properties. You can cycle among the occurrences. Highlighting can be temporary or persistent. (more info).
This maybe won't highlight but will search for a word without you needing to type it...
when you've reached the word you wanted to search, C-S, then read the full word with C-W then you can C-S and it will search for it. In my Emacs it also highlights all instances in the document.
This package available in Melpa works, you can customize the highlight style as well.
https://github.com/ignacy/idle-highlight-in-visible-buffers-mode