I attempted to update my edmx file by selecting a table. The tool spit out a info message that said the table did not have a primary key.
The entity did not get added to the design surface but it did get added to the .edmx file. In addition, using the model browser I see an Entities.Store and an Entities. My table got added to Entities.Store, but not to Entities.
I cannot access the table that was "added" in the code.
What do I do?
Steps to reproduce:
Create a SQL table with two columns that are both defined as foreign keys to other tables. Make sure the tables that the FKs point to already exist in the model on the design surface.
Right click and choose Update Model from Database...
Next. Under the Add tab, mark the new table under Tables
Click Finish.
An association will be created and it will be selected on the design surface, but it won't start with FK_, it will just be the name of your table. Go to the Model Browser and look under Entity Types. The table will not be there. Look under Associations and you will see your table name there as an association, but it will look out of place (because of the name).
Entity Framework was too smart for me. It created an association instead of an entity. Odd, but it works for how I need to use it.
I have an entity model built using the designer. In one of my tables (application), I have several foreign keys that reference the same status (status) table. As a result, when my associations were built, I have several entity objects built with an auto indexing name:
application_statuses2
application_statuses3
etc.
I'm building a "version history" type screen and want to be able to properly list the "friendly name" for each column modified. For example, I want to display "Destination Status" will be displayed instead of "application_statuses2". If I can determine the endpoint column name on the association in question, I can setup the proper display value.
I can find the entity object in the designer, I can even track where it references the foreign key in question that built the association, but I can seem to find the property that outlines the enpoints or column names. How do I determine the column name, or endpoint, on my association, or entity?
I wish it were more ready to hand, have been looking for it as well. Bit of a pain when you have multiple FKs to the same table.
Click on the navigation property you want to check
Under properties, look at the name of the association
At the top of properties, use the object navigator dropdown to switch to the association
Click into the 'Referential Constraint' property
Use the ellipses button on the right to bring up the column names
Dont know if there is a better way of doing this, but I certainly hope so!
I have entity Customer under group name Customers
I moved the Customer entity to a new group TestCustomers
The Customer db table changes in the meantime renaming a field from LastName to Surname
I do a Refresh Relational Model Data from a Database in the Catalog Explorer
No changes can be seen in my TestCustomers\Customer entity as it still has a field named LastName
Is this because the Designer has some kind of binding between it and the old entity path Customers\Customer?
How can I achieve the update I want?
In LLBLGen Pro v3.5 you can try this:
In the Entity Editor, click on the Field mappings tab.
Click the Remove mapping button.
Click the Create mapping button.
Choose the correct target from the dropdown list.
This should re-create your entity including any new fields in your target db table.
There is also the Reverse-engineer unmapped target fields which can be used for this, but I found it was disabled for my entities until I remapped them. See documentation here:
http://www.llblgen.com/documentation/3.1/Designer/Functionality%20Reference/TypedViewEditor_FieldMappingsTab.htm
I'm brand new to ASP.NET MVC (Literally just two days of learning on the fly). I'm trying to create a website using MVC, however, I've screwed something up in my solution.
I created this table that had foreign key constraints but I initially forgot to set up a primary key on the id field and forgot to set it identity specification to yes. So when I updated my DataModel and brought this table in, it showed every field as being the primary key and it showed the relationship to the other tables. So I went back to the database and changed the id field for the table to be the primary key and identity specification to yes.
I went back to the DataModel, tried to Update Model From Database, went to the refresh tab, expanded the tables, and selected the table I wanted to refresh, then click on "Finish".
The data model appeared to make the changes but it showed the relationships to the other tables twice.
So I thought I'd delete the table (entity) from the DataModel diagrahm and bring the table back in through Update Model From Database. But when I went back to the Update Model From Database...
Under the Add tab, the table isn't under the Tables
Under the Refresh tab, the table is listed, but when I select it and click on "Finish" the table doesn't reaapear in the diagrahm.
In the model browser...
Under Models
Entity Types, The entity isn't listed
Under Associations, The relationships no longer appear (obviously because the entity is gone).
Under Models.Store
Tables/Views, The table is listed.
Constraints, the relationships are shown.
I've tried dragging the table over to the diagrahm from the Model Browser, but that doesn't appear to work.
I've tried to right click in the diagrahm, add Entity but my table doesn't appear as a Base Type.
I've tried to google but I'm coming up with nothing. With this entity missing, I cannot even build my solution. Please help.
Try to delete the entity file and add it again. But you have to name it as previous entity and don't forget to delete the connectionString in web.config before add it.
If you don't know what I am saying just let me know.
Error 3007: Problem in Mapping Fragments starting at lines 186, 205: Non-Primary-Key column(s) [WheelID] are being mapped in both fragments to different conceptual side properties - data inconsistency is possible because the corresponding conceptual side properties can be independently modified.
I found several places on the web describing this error, but I simply don't understand them. (confused smiley goes here)
One
Two
Three
Four
There is something pretty fundamental here, I must be missing. Can you explain it, so that I understand it? Maybe using my real life example below?
Foreign key 1:N Wheels.Id -> Slices.WheelId
I add them to entity framework, and WheelId is not visible in the Slices-entity.
Doing some workaround (deleting the relationship from the db before adding tables to EF - then re-creating it and updating EF) I managed to get the WheelId to stay in Slices, but then I get the error mentioned at the top.
Since Slices.WheelId is an FK, you cannot expose it in your client model, period. There are ways to get the value, though.
var wheelId = someSlice.Wheels.ID;
Update In EF 4 you can do this by using FK Associations instead of independent associations.
Try to remove foreign property column from Entity set using entity model design it will solve your problem
For example
We have two tables one is customer and other one is order, using entity model design we added association between customers and orders when we do this Ado.net entity framework i will add navigation properties to both below tables.
Like
Customer.Orders - Here order is list
Order.Customer
One - Many relation.
So we need to remove property from with name CustomerId[Foreign key column] from Order entity set.
For reference:
http://social.msdn.microsoft.com/forums/en-US/adodotnetentityframework/thread/2823634f-9dd1-4547-93b5-17bb8a882ac2/
I was able to overcome this problem by the following steps:
right click the designer window
Select 'update model from database'
Select Add AND make sure that the 'Include foreign key columns in the model' checkbox is selected.
click on Finish...
I had set foreign keys up in the database but framework still wasn't pulling them in correctly. So I tried to add the association myself.
However, when I did this I would get a mapping error. It took me A WHILE but I figured out. What I did was set up the association using the entity toolbox association tool and then you have to double click on the association (1 to many) line and set the primary and foreign key there. Hopefully, this to help others who might have the same problem. I couldn't find the answer anywhere.
I had this problem for quite a different reason, and the message was slightly different; it didn't say "data inconsistency is possible because the corresponding conceptual side properties can be independently modified."
I have a table involved in my model with a binary column where I store image data. I only want this data returned when I need it (performance is a feature), so I split the table using a method similar to this. Later on, I added a property to that table, then updated the model from the database. The wizard added the property to both entity types that refer to the table with the added property. I had to delete it from one of them to solve the error.
I've had this happen because Entity Framework Update wizard mismapped some keys (or did not update?). As a result, some columns were mistakenly labeled as keys, while actual key columns were treated as plain columns.
The solution was to manually open EDMX file, find the entities, and update the keys.
Couldn't get any of the answer to work with EF6. The problem seems to be the framework doesn't import the foreign keys correctly as Associations. My solution was removing foreign keys from the tables, and then manually adding the associations using Entity Framework model, using the following steps: Entity Framework - Add Navigation Property Manually
For LinQ to Entities queries in EF1, my workaround for not having access to the foreign key as a property is with the following code, which does not produce a join query to the associated table:
dbContext.Table1s.FirstOrDefault(c => (int?)c.Table2.Id == null)
i.e, the generated SQL is:
...WHERE ([Extent1].[Table2Id] IS NULL)...
Solution is to allow deleting Rule = Cascade on Sql association.
Same thing as to be done on .edmx model, adding element to
association:
<Association Name="FK_Wheels_Slices">
<End Role="Wheels" Type= "your tipe here" Multiplicity="1">
<OnDelete Action="Cascade" />
</End>
</Association>
I had a table already mapped in EF. I added two more tables which had foreign keys in the previously added table. I then got the 3007 error.
To fix the error I deleted all three tables from the EDMX file, and then re-added them all at once together (via "Update Model from Database..."), instead of in stages.
I checked my Error List window and noticed I had errors in the model. Fixed them and all is well
in my case I solved this error by tick (include foreign key columns in the model)
- update Model from database
- tick (include foreign key columns in the model)
- finish