I have multiple UITextViews with corresponding .txt files. I'm reading them with NSString's
stringWithContentsOfFile
but I don't know the path where I should put my files. If I put it to /tmp/ on my Mac, it works in Simulator, but, of course, doesn't work on the actual device. So where should I put the files, so they'll work on both Simulator and actual Device.
Add them as resources to your project and you'll be able to load them from your application bundle using path:
NSString* filePath = [[NSBundle mainBundle] pathForResource:#"filename"
ofType:#"txt"];
If you want to make these files editable, though, you can keep them in Documents folder in application sandbox. To get its path you can use:
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory,
NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
So workflow in this case may be the following:
Check if required file is present in documents folder. If no - copy it there from resources.
Read data from file (from Documents folder)
Save updated data to file (in Documents folder) if needed
Place them into Documents folder under your application structure. You can get actual path to it by calling:
NSString *docsDirPath = [NSHomeDirectory() stringByAppendingPathComponent: #"Documents"];
This will work on the device as well as in the Simulator.
You'll want either NSTemporaryDirectory or NSDocumentDirectory.
An in-depth example for using UITextView with files can be found at http://servin.com/iphone/iPhone-File-IO.html
Related
I am trying to create my own plist file to be used in my application, I am using apple documents as refrence for doing this.
However, I have read that if you create your own plist you need to place it in the resource folder in your applications build. The issue with that is that I have no resources folder in my build... so I am woundering what should I do?.. I have read this guys answere here, he says its fine to just place the plist file in the supporting Files folder.. is this okay to do in regards to allowing the plist to be read and written too?
To read and write to plist the best practice is to copy it to document root if you want to access it through bundle you don't have write permission. I have provided a snap shot of the code here and how you can accomplish this.
NSError *err;
NSFileManager *fileManager = [NSFileManager defaultManager];
//getting the path to document directory for the file
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentDir = [paths objectAtIndex:0];
NSString *path = [documentDir stringByAppendingPathComponent:#"YourFile.plist"];
//checking to see of the file already exist
if(![fileManager fileExistsAtPath:path])
{
//if doesnt exist get the the file path from bindle
NSString *correctPath = [[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:#"YourFile.plist"];
//copy the file from bundle to document dir
[fileManager copyItemAtPath:correctPath toPath:path error:&err];
}
You can put that plist file anywhere you want.
The important thing will be copying it into the bundle. So to be sure for that check
project settings>build phases>copy bundle resources
You can open project settings by left-clicking on your project in the project navigator.
I am new to iPhone development. I have created plist such as from my previous post. It works well in simulator but not in device.
I am getting the saved value from the plist and checking for the condition. When I use simulator it works but not in device.
(1) You can't write to a file in the resource folder of an iPhone. It is part of the security system of the phone that prevent malicious code from altering an application after it has been installed.
(2) If you want to save new data to a file you need to write the file to one of the automatically generated folders. Whenever an iPhone app is installed on the device or simulator, the system creates a default set of folders.
(3) You want to write to either the Preferences folder or the Documents folder. If the data concerns the operation of the app, write it to preferences. If it contains user data write to Documents.
Preferences:
NSArray *sysPaths = NSSearchPathForDirectoriesInDomains(NSLibraryDirectory,NSUserDomainMask, YES);
NSString *prefsDirectory = [[sysPaths objectAtIndex:0] stringByAppendingPathComponent:#"/Preferences"];
Documents:
NSArray *sysPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory ,NSUserDomainMask, YES);
NSString *docsDirectory = [sysPaths objectAtIndex:0];
Say you want to read a default preference plist file, make some changes and then save it the preferences folder.
NSString *plistPath=[[NSBundle mainBundle] pathForResource:#"PlistFileName" ofType:#"plist"];
NSMutableArray *defaultPrefs=[[NSMutableArray alloc] initWithContentsOfFile:plistPath];
//... modify defaultPrefs
NSString *outputFilePath=[prefsDirectory stringByAppendingPathComponent:#"alteredPrefs.plist"];
[defaultPrefs writeToFile:outputFilePath atomically:NO];
I am trying to understand how to create my own directory tree and access it from my application.
I am doing some kind of learning program and want to create a directory structure like this:
-MyLessonsDirectory
--LessonDirectory_1
---Step_1
---Step_2
---Step_3
--LessonDirectory_2
---Step_1
---Step_2
---Step_3
.
.
and so on
In each "Step"-directory I will have specific content for that step of the lesson. The content is added by me while developing. Hence, I don't want to create the structure and content from within the application, just access it and reading the content of the directories. If I can create this kind of structure and use it it will be very easy to create a nice design that makes it easy to create new lessons in my app.
What I cannot figure out is where I should create those directories in the file-structure in xCode and what is the path to those directories from my application.
You want to look at NSFileManager to create directories:
NSFileManager *fm = [NSFileManager defaultManager];
NSError *error;
BOOL result = [fm createDirectoryAtPath:#"path....." withIntermediateDirectories:YES attributes:nil error:&error];
if(result){
NSLog(#"success!");
} else {
NSLog(#"error: %#",error);
}
As far as where to create the directories, you can put it in ~/Application Support/--Your App's Name-- This is where you should store your app's data if the user doesn't require access to it. Otherwise, you should let the user decide where to save it.
- (NSString *)applicationSupportDirectory {
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSApplicationSupportDirectory, NSUserDomainMask, YES);
NSString *basePath = ([paths count] > 0) ? [paths objectAtIndex:0] : NSTemporaryDirectory();
return [basePath stringByAppendingPathComponent:#"MyApplication"];
}
On the iPhone, you only have access to the apps own directories. The best place to put practice directories in the Documents folder in the app directory.
This...
NSString *dp=[NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject];
... gives you the path to the directory folder which you can then hand off to the NSFileManager.
If you want to see the directory structure visually, run the app on the simulator and look in
~/Library/Application Support/iPhone Simulator/User/Applications
The app will be in one of the folders with the gibberish UUID name. You can see the directories and files there in the Finder.
I would add that the iPhone already has most of the directories you might practically need. You have preferences, cache, tmp, Documents etc all in place.
Edit01:
What I want to do is to add content
manually before I start the
application. Then, from within the
application I will read the content I
added before starting the application.
You cannot alter the default directory structure and you have absolutely no control over how the application or its directories are installed. iPhone apps do not have external support files of any kind. Every thing is inside the app bundle.
However, the app bundle is really just a directory so you can stuff things inside it and copy them out into one of the default directories the first time the app runs. You can write anything you want to the documents directory.
I have written one application that save txt file into device. When I test on simulator, I am able to read and write file. After I test on device, read is working fine but it doesn't write anything on that text file. I have searched for the solution but it seems like it has problem with right access. Anyone can suggest me how to make this work?
What path are you using to save the file to?
I'm using
- (NSString *)dataFilePath{
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
return [documentsDirectory stringByAppendingPathComponent:#"myFileNameHere.txt"];
}
and then pass [self dataFilePath]; into the writeToFile method as the path
On real device you don't have access to write everywhere. See "Commonly Used Directories" in Developers Guide - you should write to Documents or Caches directories (how to get their paths)
I am developing an iPhone app, in which i want use an .plist file to save some config variables.
in my xcode where to create that .plist file and how to access it???
thank you,
You would put in the resources folder. Then use something like this to load it:
NSString *file = [[NSBundle mainBundle] pathForResource:#"TwitterUsers" ofType:#"plist"];
NSArray *Props = [[NSArray alloc] initWithContentsOfFile:file];
Where TwitterUsers is the name of your plist file.
If your plist file contains keys and values you would make the second line an NSDictionary instead of NSArray.
To store the plist file in your Documents directory you will have to include plist file in your app and then on first launch copy it to Documents directory.
To get access to the file in Documents directory:
NSArray *paths =
NSSearchPathForDirectoriesInDomains(NSDocumentDirectory,
NSUserDomainMask, YES);
NSString *documentsPath = [paths objectAtIndex:0];
// <Application Home>/Documents/foo.plist
NSString *fooPath =
[documentsPath stringByAppendingPathComponent:#“foo.plist”];
I would recommend keeping it in the Resources directory in the app bundle, but you can just drag it into the project window. The NSBundle method pathForResource:ofType: should give you a path, which you can pass to NSDictionary's dictionaryWithContentsOfFile:.
Edit: Sorry, full code sample (thought I'd already copied & pasted):
NSString *path = [[NSBundle mainBundle] pathForResource:#"MyConfig" ofType:#"plist"];
NSDictionary *myConfig = [NSDictionary dictionaryWithContentsOfFile:path];
EDIT Just occured to me "config variables" might not be immutable. If that is the case, disregard this answer.
I would recommend you use NSUserDefaults to store configuration variables instead of rolling your own system.
If you are modifying a .plist inside your application bundle, you will risk invalidating the signature on the bundle, while will not end well.
If you must store and modify your own .plist, store it in the Documents directory, which is also where your application should store anything that it downloads, creates, etc. See File and Data Management and NSFileManager.
By default if you have included the plist in the project anywhere (under Resources or otherwise) XCode will copy it into the application bundle where you can get to it with the aforementioned pathForResource call. Just thought I'd mention that as you might prefer a grouping where you do not have it in resources...
you can find the example sqlite book ..... the silte data file was save into the directory 'Document' .... you will know the prcess
Why would it invalidate the bundle?
Would this plist file in the resources folder be backed up in iTunes like files in the documents folder?