Is there any solution for dompdf unicode.
Dompdf utf problem is mainly about fonts. If you can supply your own fonts or use something like DejaVu which has contains large set of chars. Edit the information your fonts in config file dompdf_font_family_cache.dist.php.
Get your language special characters in ASCII numerical code and replace like that, in this example Turkish special chars
$from = array('İ', 'ı', 'Ö', 'ö', 'Ü', 'ü', 'Ç', 'ç', 'Ğ', 'ğ', 'Ş', 'ş');
$to = array('İ', 'ı', 'Ö', 'ö', ' Ü', 'ü', 'Ç', 'ç', 'Ğ', 'ğ', 'Ş', 'ş');
$html= str_replace($from, $to, $html);
Your output should looks good without weird chars.
Unfortunately there is not. I would go with wkhtmltopdf but that requires access on the box. Other options are fpdf and others spawned from the same fpdf (but these don't convert HTML to PDF, but rather supply you with some primitives for creating a PDF). Again, I would go with wkhtmltopdf.
Related
I have a bad words filter that uses a list of keywords saved in a local UTF-8 encoded file. This file includes both Latin and non-Latin chars (mostly English and Arabic). Everything works as expected with Latin keywords, but when the variable includes non-Latin chars, the matching does not seem to recognize these existing keywords.
How do I go about matching both Latin and non-Latin keywords.
The badwords.txt file includes one word per line as in this example
bad
nasty
racist
سفالة
وساخة
جنس
Code used for matching:
$badwords = file_get_contents("badwords.txt");
$badtemp = explode("\n", $badwords);
$badwords = array_unique($badtemp);
$hasBadword = 0;
$query = strtolower($query);
foreach ($badwords as $key => $val) {
if (!empty($val)) {
$val = trim($val);
$regexp = "/\b" . $val . "\b/i";
if (preg_match($regexp, $query))
$badFlag = 1;
if ($badFlag == 1) {
// Bad word detected die...
}
}
}
I've read that iconv, multibyte functions (mbstring) and using the operator /u might help with this, and I tried a few things but do not seem to get it right. Any help would be much appreciated in resolving this, and having it match both Latin and non-Latin keywords.
The problem seems to relate to recognizing word boundaries; the \b construct is apparently not “Unicode aware.” This is what the answers to question php regex word boundary matching in utf-8 seem to suggest. I was able to reproduce the problem even with text containing Latin letters like “é” when \b was used. And the problem seems to disappear (i.e., Arabic words get correctly recognized) when I set
$wstart = '(^|[^\p{L}])';
$wend = '([^\p{L}]|$)';
and modify the regexp as follows:
$regexp = "/" . $wstart . $val . $wend . "/iu";
Some string functions in PHP cannot be used on UTF-8 strings, they're supposedly going to fix it in version 6, but for now you need to be careful what you do with a string.
It looks like strtolower() is one of them, you need to use mb_strtolower($query, 'UTF-8'). If that doesn't fix it, you'll need to read through the code and find every point where you process $query or badwords.txt and check the documentation for UTF-8 bugs.
As far as I know, preg_match() is ok with UTF-8 strings, but there are some features disabled by default to improve performance. I don't think you need any of them.
Please also double check that badwords.txt is a UTF-8 file and that $query contains a valid UTF-8 string (if it's coming from the browser, you set it with a <meta> tag).
If you're trying to debug UTF-8 text, remember most web browsers do not default to the UTF-8 text encoding, so any PHP variable you print out for debugging will not be displayed correctly by the browser, unless you select UTF-8 (in my browser, with View -> Encoding -> Unicode).
You shouldn't need to use iconv or any of the other conversion API's, most of them will simply replace all of the non-latin characters with latin ones. Obviously not what you want.
I have a reasonable size flat file database of text documents mostly saved in 8859 format which have been collected through a web form (using Perl scripts). Up until recently I was negotiating the common 1252 characters (curly quotes, apostrophes etc.) with a simple set of regex's:
$line=~s/\x91/\&\#8216\;/g; # smart apostrophe left
$line=~s/\x92/\&\#8217\;/g; # smart apostrophe right
... etc.
However since I decided I ought to be going Unicode, and have converted all my scripts to read in and output utf8 (which works a treat for all new material), the regex for these (existing) 1252 characters no longer works and my Perl html output outputs literally the 4 characters: '\x92' and '\x93' etc. (at least that's how it appears on a browser in utf8 mode, downloading (ftp not http) and opening in a text editor (textpad) it's different, a single undefined character remains, and opening the output file in Firefox default (no content type header) 8859 mode renders the correct character).
The new utf8 pragmas at the start of the script are:
use CGI qw(-utf8);
use open IO => ':utf8';
I understand this is due to utf8 mode making the characters double byte instead of single byte and applies to those chars in the 0x80 to 0xff range, having read up the article on wikibooks relating to this, however I was non the wiser as to how to filter them. Ideally I know I ought to resave all the documents in utf8 mode (since the flat file database now contains a mixture of 8859 and utf8), however I will need some kind of filter in the first place if I'm going to do this anyway.
And I could be wrong as to the 2-byte storage internally, since it did seem to imply that Perl handles stuff very differently according to various circumstances.
If anybody could provide me with a regex solution I would be very grateful. Or some other method. I have been tearing my hair out for weeks on this with various attempts and failed hacking. There's simply about 6 1252 characters that commonly need replacing, and with a filter method I could resave the whole flippin lot in utf8 and forget there ever was a 1252...
Encoding::FixLatin was specifically written to help fix data broken in the same manner as yours.
Ikegami already mentioned the Encoding::FixLatin module.
Another way to do it, if you know that each string will be either UTF-8 or CP1252, but not a mixture of both, is to read it as a binary string and do:
unless ( utf8::decode($string) ) {
require Encode;
$string = Encode::decode(cp1252 => $string);
}
Compared to Encoding::FixLatin, this has two small advantages: a slightly lower chance of misinterpreting CP1252 text as UTF-8 (because the entire string must be valid UTF-8) and the possibility of replacing CP1252 with some other fallback encoding. A corresponding disadvantage is that this code could fall back to CP1252 on strings that are not entirely valid UTF-8 for some other reason, such as because they were truncated in the middle of a multi-byte character.
You could also use Encode.pm's support for fallback.
use Encode qw[decode];
my $octets = "\x91 Foo \xE2\x98\xBA \x92";
my $string = decode('UTF-8', $octets, sub {
my ($ordinal) = #_;
return decode('Windows-1252', pack 'C', $ordinal);
});
printf "<%s>\n",
join ' ', map { sprintf 'U+%.4X', ord $_ } split //, $string;
Output:
<U+2018 U+0020 U+0046 U+006F U+006F U+0020 U+263A U+0020 U+2019>
Did you recode the data files? If not, opening them as UTF-8 won't work. You can simply open them as
open $filehandle, '<:encoding(cp1252)', $filename or die ...;
and everything (tm) should work.
If you did recode, something seem to have gone wrong, and you need to analyze what it is, and fix it. I recommend using hexdump to find out what actually is in a file. Text consoles and editors sometimes lie to you, hexdump never lies.
I've tried everything Google and StackOverflow have recommended (that I could find) including using Encode. My code works but it just uses UTF8 and I get the wide character warnings. I know how to work around those warnings but I'm not using UTF8 for anything else so I'd like to just convert it and not have to adapt the rest of my code to deal with it. Here's my code:
my $xml = XMLin($content);
# Populate the #titles array with each item title.
my #titles;
for my $item (#{$xml->{channel}->{item}}) {
my $title = Encode::decode_utf8($item->{title});
#my $title = $item->{title};
#utf8::downgrade($title, 1);
Encode::from_to($title, 'utf8', 'iso-8859-1');
push #titles, $title;
}
return #titles;
Commented out you can see some of the other things I've tried. I'm well aware that I don't know what I'm doing here. I just want to end up with a plain old ASCII string though. Any ideas would be greatly appreciated. Thanks.
The answer depends on how you want to use the title. There are 3 basic ways to go:
Bytes that represent a UTF-8 encoded string.
This is the format that should be used if you want to store the UTF-8 encoded string outside your application, be it on disk or sending it over the network or anything outside the scope of your program.
A string of Unicode characters.
The concept of characters is internal to Perl. When you perform Encode::decode_utf8, then a bunch of bytes is attempted to be converted to a string of characters, as seen by Perl. The Perl VM (and the programmer writing Perl code) cannot externalize that concept except through decoding UTF-8 bytes on input and encoding them to UTF-8 bytes on output. For example, your program receives two bytes as input that you know they represent UTF-8 encoded character(s), let's say 0xC3 0xB6. In that case decode_utf8 returns a representation that instead of two bytes, sees one character: ö.
You can then proceed to manipulate that string in Perl. To illustrate the difference further, consider the following code:
my $bytes = "\xC3\xB6";
say length($bytes); # prints "2"
my $string = decode_utf8($bytes);
say length($string); # prints "1"
The special case of ASCII, a subset of UTF-8.
ASCII is a very small subset of Unicode, where characters in that range are represented by a single byte. Converting Unicode into ASCII is an inherently lossy operation, as most of the Unicode characters are not ASCII characters. You're either forced to drop every character in your string which is not in ASCII or try to map from a Unicode character to their closest ASCII equivalents (which isn't possible in the vast majority of cases), when trying to coerce a Unicode string to ASCII.
Since you have wide character warnings, it means that you're trying to manipulate (possibly output) Unicode characters that cannot be represented as ASCII or ISO-8859-1.
If you do not need to manipulate the title from your XML document as a string, I'd suggest you leave it as UTF-8 bytes (I'd mention that you should be careful not to mix bytes and characters in strings). If you do need to manipulate it, then decode, manipulate, and on output encode it in UTF-8.
For further reading, please use perldoc to study perlunitut, perlunifaq, perlunicode, perluniintro, and Encode.
Although this is an old question, I just spent several hours (!) trying to do more or less the same thing! That is: read data from a UTF-8 XML file, and convert that data into the Windows-1252 codepage (I could also have used Latin1, ISO-8859-1 etc.) in order to be able to create filenames with accented letters.
After much experimentation, and even more searching, I finally managed to get the conversion working. The "trick" is to use Encode::encode instead of Encode::decode.
For example, given the code in the original question, the correct (or at least one :-) way to convert from UTF-8 would be:
my $title = Encode::encode("Windows-1252", $item->{title});
or
my $title = Encode::encode("ISO-8859-1", $item->{title});
or
my $title = Encode::encode("<your-favourite-codepage-here>", $item->{title});
I hope this helps others having similar problems!
You can use the following line to simply get rid of the warning. This assumes that you want to use UTF8, which shouldn't normally be a problem.
binmode(STDOUT, ":encoding(utf8)");
Lets say i have this code:
use strict;
use LWP qw ( get );
my $content = get ( "http://www.msn.co.il" );
print STDERR $content;
The error log shows something like "\xd7\x9c\xd7\x94\xd7\x93\xd7\xa4\xd7\xa1\xd7\x94"
which i'm guessing it's utf-16 ?
The website's encoding is with
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1255">
so why these characters appear and not the windows-1255 chars ?
And, another weird thing is that i have two servers:
the first server returning CP1255 chars and i can simply convert it to utf8,
and the current server gives me these chars and i can't do anything with it ...
is there any configuration file in apache/perl/module that is messing up the encoding ?
forcing something ... ?
The result in my website at the second server, is that the perl file and the headers are all utf8, so when i write text that aren't english chars, the content from the example above is showing ok ( even though it's weird utf chars ) but my own static text are look like "×ס'××ר××:"
One more thing that i tested is ...
Through perl:
my $content = `curl "http://www.anglo-saxon.co.il"`;
I get utf8 encoding.
Through Bash:
curl "http://www.anglo-saxon.co.il"
and here i get CP1255 ( Windows-1255 ) encoding ...
Also,
when i run the script in bash - it gives CP1255, and when run it through the web - then it's utf8 again ...
fixed the problem by changin the content from utf8 - to what is supposed to, and then back to utf8:
use Text::Iconv;
my $converter = Text::Iconv->new("utf8", "CP1255");
$content=$converter->convert($content);
my $converter = Text::Iconv->new("CP1255", "utf8");
$content=$converter->convert($content);
All of this manual encoding and decoding is unnecessary. The HTML is lying to you when it says that the page is encoded in windows-1255; the server says it's serving UTF-8, and it is. Blame Microsoft HTML-generation tools.
Anyway, since the server does return the correct encoding, this works:
my $response = LWP::UserAgent->new->get("http://www.msn.co.il/");
my $content = $res->decoded_content;
$content is now a perl character string, ready to do whatever you need. If you want to convert it to some other encoding, then calling Encode::encode on it is appropriate; do not use Encode::decode as it's already been decoded once.
http://www.msn.co.il is in UTF-8, and indicates that properly. The string "\xd7\x9c\xd7\x94\xd7\x93\xd7\xa4\xd7\xa1\xd7\x94" is also proper UTF-8 (להדפסה). I don't see the problem.
I think your second problem is due to you mixing different encodings (UTF-8 and Windows-1252). You might want to encode/decode your strings properly.
First, note that you should import get from LWP::Simple. Second, everything works fine with:
#!/usr/bin/perl
use strict; use warnings;
use LWP::Simple qw ( getstore );
getstore 'http://www.msn.co.il', 'test.html';
which indicates to me that the problem is the encoding of the filehandle to which you are sending the output.
The string with the hex values that you gave appears to be a UTF-8 encoding. You are getting this because Perl ‘likes to’ use UTF-8 when it deals with strings. The LWP::Simple->get() method automatically decodes the content from the server which includes undoing any Content-Encoding as well as converting to UTF-8.
You could dig into the internals and get a version that does change the character encoding (see HTTP::Message's decoded_content, which is used by HTTP::Response's decoded_content, which you can get from LWP::UserAgent's get). But it may be easier to re-encode the data in your desired encoding with something like
use Encode;
...;
$cp1255_bytes = encode('CP1255', decode('UTF_8', $utf8_bytes));
The mixed readable/garbage characters you see are due to mixing multiple, incompatible encodings in the same stream. Probably the stream is labeled as UTF-8 but you are putting CP1255 encoded characters into it. You either need to label the stream as CP1255 and put only CP1255-encoded data into it, or label it as UTF-8 and put only UTF-8-encoded data into it. Remind yourself that bytes are not characters and convert between them appropriately.
I am trying to Convert hex representations of Unicode characters to the characters they represent. The following example works fine:
#!/usr/bin/perl
use Encode qw( encode decode );
binmode(STDOUT, ':encoding(utf-8)');
my $encoded = encode('utf8', "\x{e382}\x{af}");
eval { $encoded = decode('utf8', $encoded, Encode::FB_CROAK); 1 }
or print("coaked\n");
print "$encoded\n";
However the hex digits are stored in 3 variables.
So if i replace the encode line with this:
my $encoded = encode('utf8', "\x{${byte1}${byte2}}\x{${byte3}}");
where
my $byte1 = "e3"; my $byte2 = "82"; my $byte3 = "af";
It fails as it tries to evaluate the \x immediately and sees the $ sign and { as characters.
Does anyone know how to get around this.
Instead of
my $encoded = encode('utf8', "\x{${byte1}${byte2}}\x{${byte3}}");
You can use
my $encoded = encode('utf8', chr(hex($byte1 . $byte2)) . chr(hex($byte3)));
hex() converts from hexadecimal, and chr() returns the unicode character for a given code point.
[Edit:]
Not related to your question, but I noticed you mix utf-8 and utf8 in your program. I don't know if this is a typo, but you should be a ware that these are not the same things in Perl:
utf-8 (with hyphen, case insensitive) is what the UTF-8 standard says, whereas utf8 (no hyphen, also case insensitive) is Perls internal encoding, which is more loosely defined (it allows codepoints that are not valid unicode codepoints). In general, you should stick to utf-8 (perlunifaq has the details).
trendel's answer seems pretty good, but Encode::Escape offers an alternative solution:
use Encode::Escape::Unicode;
my $hex = '263a';
my $escaped = "\\x{" . $hex . "}\n";
print encode 'utf8', decode 'unicode-escape', $escaped;
First off, think hard about why you ended up with three variables, $byte1, $byte2, $byte3, each holding one byte's worth of data, as a two-character string, in hex. This part of your program seems hard because of a poor design decision further up. Fix that bad decision, and this part of the code will fall out naturally.
That being said, what you want to do, I think, is this:
my $byte1 = "e3"; my $byte2 = "82"; my $byte3 = "af";
my $str = chr(hex($byte1 . $byte2)) . chr(hex($byte3))
The encoding stuff is a red herring; you shouldn't be worrying about encodings in the middle of your program, only when you do IO.
I'm assuming in the above that you want to get out a two character string, U+E382 followed by U+AF. That's what you actually asked for. However, since there is no U+E382, since it's in the middle of the private use area, that's probably not what you actually wanted. Please try to reword the question? Perhaps ask a more basic question, and describe what you are trying to achieve, rather then how you are going about trying to do it?