I have Eclipse Galileo (for Java EE Developers) installed, and I'm now trying to get the m2eclipse Maven plugin installed as well.
I follow the basic steps described at http://m2eclipse.sonatype.org/installing-m2eclipse.html, and it seems to be installing just fine. However, after restarting Eclipse after the install it doesn't seem to be anywhere. I should for instance have the ability to create a new maven project, but when the new-project wizard opens, there is no folder for Maven (I also cannot find any reference to it in the context menus of the existing projects I have).
When I click at Help > About Eclipse > Installation Details, I find "Maven Integration for Eclipse (Required)" in the tab "Installed Software", yet another thing pointing towards a successful installation (but I can't find it under the "Plug-ins" tab, should it be there too?)...
I feel like I'm just missing something very obvious, but right now I just don't see it...
I managed to find the answer to this myself:
I had put the Eclipse installation folder under c:\Program Files\, but when I moved it directly under c:\ instead, the plug-in installation worked just as it should. I assume that is because Eclipse wasn't allowed to write to its own installation folder (but I didn't get the usual question from Windows that something was trying to access Program Files either...).
In one way I feel like I should be a bit ashamed that I didn't think of this before. On the other hand though, there could have been some reasonable error message stating that something failed during the plug-in installation...
Well, I hope this at least helps somebody else as well :)
Did you check the m2eclipse installation requirements?
In particular, you need WTP.
"Maven integration for Eclipse" (core feature) and optional "Maven POM Editor" feature depend on the "Eclipse XML Editors and Tools" feature from WST
"Maven integration for WTP" feature provides Maven project configuration for WTP
Did you have a previous version of m2eclipse installed? Did you uninstall it before to install the latest version? Just in case, does the following note applies to you?
Note about 0.9.8 Workspace Incompatibility: If you are using
m2eclipse 0.10.0 with a workspace that
contains projects created under
m2eclipse 0.9.8, you must remove the
workspaceState.ser file. The
workspaceState.ser file is located
within the workspace directory in
$workspacedir/.metadata/.plugins/org.maven.ide.eclipse/workspaceState.ser.
If you remove this file, m2eclipse
0.10.0 will regenerate it as needed.
In my case, uninstalling the previous m2eclipse version didn't work and I had to start with a fresh Eclipse install (maybe try this also).
Regarding the plugin tab, this is what I have (to confirm that you should definitely find something):
alt text http://www.imagebanana.com/img/84h6mw8z/screenshot_008.png
Note that I also installed some extras from m2eclipse Extras Update Site: http://m2eclipse.sonatype.org/sites/m2e-extras
I was able to solve this problem by going into Program Files, right click on the eclipse.exe file and select "Run as administrator". When I restarted Eclipse it said I had no plugins installs so I reinstalled and my problems were solved.
PROBLEM SOLVED
I had this same problem and I used the following software site:
["M2Eclipse - http://download.eclipse.org/technology/m2e/releases/1.0] (without square brackets) to download the M2Eclipse plugin in Eclipse 3.7.0 (Indigo). For more information refer this.
To solve the problem of 'not getting Maven plugin running in eclipse' , it can be solved by altering admin rights to the .m2 folder . Right click on .m2 folder and go to network sharing. give all rights to all users. Restart eclipse and maven options will start to appear in Eclipse.
Related
I am currently working with a product that is built onto Eclipse version 3.4.2.
I am trying to install the jaxb builder plugin, but it is not working.
So far I have tried:
Unzipping the folder into the Eclipse plugins folder and then restarting Eclipse
The restarting Eclipse using the -clean flag
Unzipping the folder into the product's (built onto Eclipse) plugin folder and then restarting with and without -clean
Unzipping the folder into the dropins folder and then restarting Eclipse
I think that it may be possible that this version of jaxb builder doesn't support my version of Eclipse, but I can't figure out how to find that information. I tried emailing the address on the "Contact Us" page, but it came right back to me.
Is it possible that the product has been discontinued? How can I find out?
Discontinued? I don't know but the last build is from 2011-05. It's built against Eclipse 3.4 (see plugin.xml). What do you mean be "not working"? Exceptions? Entries in Eclipse error log/view?
Turns out it was the application's fault. I'm not exactly sure what the problem was, but when I did the exact same thing in a regular Eclipse environment, it came up with no issues.
I will edit if I get more information.
I'm struggling to get the Eclipse FindBugs plugin to work and am sure there's a schoolboy error being made somewhere.
I extracted the file findbugs-2.0.2-rc2.zip to a local folder C:\Program Files\findbugs-2.0.2-rc2 and running findbugs.bat, FindBugs works fine running it over a local Java (Eclipse) project.
I added the FindBugs update site, it found "FindBugs Feature, 2.0.1.20120712" and installed it. Restarting, right-clicking on an open Java Project doesn't display the "FindBugs" option (that this video shows).
I looked in Window > Preferences to try to find a way to inform the plugin of the local FindBugs installation (in Program Files), but couldn't find anything.
Uninstalling "FindBug Feature", I tried extracting the FindBugs Eclipse plugin zip file into Eclipse's plugins folder, but after a restart, saw no difference.
Help > About Eclipse > Installation Details > Installed Software lists "FindBugs Feature 2.0.1.20120712".
Can anyone please offer a pointer on where I'm going wrong here? Thanks!
Windows 7, Eclipse IDE for Java EE Developers Juno SR1, JDK 1.7.0_09, FindBugs 2.0.2-rc2
As suggested above, problem is likely caused by not having appropriate write access to the C:\Program Files\Eclipse\plugins folder.
Solution:
Close Eclipse. Restart Eclipse as Administrator (right click - Run as Administrator). Reinstall plugin. Restart Eclipse.
It looks like the Findbugs plugin wasn't installed properly and/or disabled by Eclipse. There can be several causes.
Multiple versions of the same plugin. To make sure this isn't the case, remove all Findbugs versions (installed manually and via the marketplace), and reinstall one (preferably via the marketplace). Watch for any warnings during installation.
There is a (dependency) conflict with another plugin. However, if this is the case I think Eclipse will warn in the log which other plugin is the cause of the conflict.
Rights problem. Make sure you have write permissions in the main Eclipse folder and all it's child folders.
I remember reading somewhere that installing Eclipse under the C:\Program Files\ in Windows can also be causing problems. Try moving Eclipse to a different folder, e.g. C:\Eclipse
Hi I also faced the similar problem but from my own experience i can suggest you the solution :-
Plz ensure that you are using eclipse version 3.6 or higher. findbugs 2.0 is not compatible with Eclipse 3.5(Eclipse Galileo).
1) Plz extract the findbugs zip file into eclipse folder(wher your eclipse is installed). This will automatically move findbug plugins into eclipse plugins folder. Restart the eclipse and you will find findbugs option on right clicking on project.
2) if 1 step does not work plz remove all the findbug jars for the eclipse plugins folder and place the complete folder into the eclipse dropins folder. Restart the eclipse and you will see the difference.
You can follow these step's to make findbugs work in your eclipse.
1.Install FireBug plugin from marketplace.
Help->Eclipse Marketplace ->then search for FindBugs
2.Configure FindBug for your project
using Maven Without Maven
This worked fine for me using eclipse juno.
I don't need m2eclipse to work properly, I just need to remove m2eclipse for now and let eclipse behave normally. how do i do this?
Two solutions:
Remove the plugin through the list of installed plugins
(the illustrations are from the blog post "Install Eclipse UI Form Editor" written by Albert ATTARD):
The "about eclipse" menu will give you access to the list of installed Software:
You can click on the right application (m2eclipse for you, Jiglo in this example), and click uninstall, and restart eclipse.
A safer solution would be first to install a new fresh copy of Eclipse, and add your existing plugins (except m2eclipse): if that fails, you still have your previous Eclipse installation untouched.
after doing what VonC suggested, goto the directory eclipse\plugins and search anything with m2e and remove it from the directory
also do the same for the eclipse\features directory.
then you won't be seeing any of the m2e things again.
i would have used m2e if it had a command line feature similar to
"mvn eclipse:clean" and "mvn eclipse:eclipse"
sadly their both incompatible with each other..
right now all i needed are those two command lines to get me up and running with eclipse just to browse and edit the code, etc..
I am new to Eclipse so I am having a hard time troubleshooting this problem. I have a new installation of Eclipse Java EE - Galileo on Windows, and I am unable to see any changes made in the IDE after installing plugins. I have verified that the plugins are installed via installation details, but see no changes made.
For example, after installing the maven integration plugin m2eclipse I go to File->New->Project ... and I have no option for maven. After installing the QuickRex plugin I have no view for it etc.
I have tried re-installing the plugins, re-installing Eclipse, and starting Eclipse with the -clean option, but nothing has resolved the issue.
Any ideas? Thanks!
Ok. This is just a wild guess but could you start over with a fresh install and make sure that you uncheck the option Contact all update sites during install to find required software as shown below:
alt text http://img717.imageshack.us/img717/8039/screenshot003ao.png
I faced a similar problem (on another platform than yours), some updates were "disabling" all my plugins. Not checking this option allowed me to work around this issue.
Follow-up: You'll need to install that Zest stuff manually from the GEF update site:
alt text http://img339.imageshack.us/img339/8003/screenshot003rl.png
I'm trying to install the WTP (web platform tools) to my Eclipse installation so I can get the XSL transformations working. The base Eclipse they installed for me here was the plain Java IDE (the splash screen says "Ganymede" if that means anything). Looking at this site, the URL to get the download should be here: http://download.eclipse.org/webtools/updates/ ...But when I give that URL to the Eclipse update manager, I get an error telling me: "No repository found at http://download.eclipse.org/webtools/updates/"
Anyone else had this problem? Anyone know what might be up? Anyone know how to get the xsl-transform plugin installed?
EDIT:
I should have mentioned before that I want to find a way to do this without installing any new instances of Eclipse. This process will eventually be sent to several other developers who already have Eclipse (same version that I'm testing with) and I'd rather just do an in-place upgrade rather than have everyone go and install a new product.
UPDATE:
I found another plugin, Xcarecrows 4 XML which can also do XSL transforms. The interface is ugly and seems more than a little quirky, but it's also a small download, and at least it runs and transforms. Unless I can find an easy way to get WTP working, I'll probably just stick with this.
You can try and install WTP through the main Ganymede update site:
http://download.eclipse.org/releases/ganymede/
Or you can download the latest Java EE bundle and use that instead of your current Eclipse
(do NOT unpack it on top of your current Eclipse, but unpack it elsewhere, to test that second installation: it will come with WTP inside)
Note: check then "How do I start Eclipse" to point to your existing workspace in order to see all your previous project in your new Eclipse installation.
As mentioned in your link, XSL Tools is now part of WTP (for Eclipse 3.5 Galileo), and that may explain why your Eclipse Ganymede (3.4) might not interpret correctly the P2 update site for WTP (P2 being the new Eclipse provisioning mechanism introduced late in the 3.4 release cycle)
For Eclipse 3.5, you have an XSL Tools installation illustrated here:
But Eclipse3.4 is more likely to be compatible with XSLT0.5 and you will need a separate installation, because "XSL Tools" wasn't yet part of WTP.
I am not sure, however, where to find such an installation package within the Eclipse projects.
Use the following update site :
For Juno :
http://download.eclipse.org/webtools/repository/juno/
For Indigo :
http://download.eclipse.org/webtools/repository/indigo/
I'm assuming you don't have any firewall exceptions for Eclipse right?
The site for the WTP update is indeed the one you've listed. Maybe post a screenshot? You've added it specifically to your remote update site list?
Either way try a manual update which should be more reliable and get you up and running for now.
All-In-One Update (Eclipse IDE included):
Go to the Eclipse Download site.
Grab the all-in-one package: Eclipse IDE for Java EE Developers
Install, have a coffee and enjoy. (WTP is included)
Manual Update your existing installation of Eclipse:
Download the applicable WTP source package to your desktop
Shutdown Eclipse
Extract the package to your Eclipse installation directory
Startup Eclipse. (WTP is now available)
Follow the steps in the FAQ at http://wiki.eclipse.org/WTP_FAQ#How_do_I_install_WTP.3F .
Are you behind a proxy? If so, you need to make sure you configure your proxy settings in Eclipse.
Window > Preferences
General > Network Connections
Ok, I can probably get it working if I do a clean install of Eclipse. I can do that on my machine, but not the other team members' machines (at least not without going through many emails and paper work) so I'm going to say that XCarecrows 4 XML is the solution. It is able to do XSL transformations in Eclipse 3.4 and doesn't require anything else to be installed. Since XSLT is all I need, the plugin will do.
you can use the marketplace:
https://marketplace.eclipse.org/content/eclipse-java-ee-developer-tools-0
like the site says:
Drag to Install!Drag to your running Eclipse Workspace.