I have the following: param="/var/tmp/test"
I need to replace the word test with another word such as new_test
need a smart way to replace the last word after "/" with sed
echo 'param="/var/tmp/test"' | sed 's/\/[^\/]*"/\/REPLACEMENT"/'
param="/var/tmp/REPLACEMENT"
echo '/var/tmp/test' | sed 's/\/[^\/]*$/\/REPLACEMENT/'
/var/tmp/REPLACEMENT
Extracting bits and pieces with sed is a bit messy (as Jim Lewis says, use basename and dirname if you can) but at least you don't need a plethora of backslashes to do it if you are going the sed route since you can use the fact that the delimiter character is selectable (I like to use ! when / is too awkward, but it's arbitrary):
$ echo 'param="/var/tmp/test"' | sed ' s!/[^/"]*"!/new_test"! '
param="/var/tmp/new_test"
We can also extract just the part that was substituted, though this is easier with two substitutions in the sed control script:
$ echo 'param="/var/tmp/test"' | sed ' s!.*/!! ; s/"$// '
test
You don't need sed for this...basename and dirname are a better choice for assembling or disassembling pathnames. All those escape characters give me a headache....
param="/var/tmp/test"
param_repl=`dirname $param`/newtest
It's not clear whether param is part of the string that you need processed or it's the variable that holds the string. Assuming the latter, you can do this using only Bash (you don't say which shell you're using):
shopt -s extglob
param="/var/tmp/test"
param="${param/%\/*([^\/])//new_test}"
If param= is part of the string:
shopt -s extglob
string='param="/var/tmp/test"'
string="${string/%\/*([^\/])\"//new}"
This might work for you:
echo 'param="/var/tmp/test"' | sed -r 's#(/(([^/]*/)*))[^"]*#\1newtest#'
param="/var/tmp/newtest"
Related
This question already has answers here:
Using different delimiters in sed commands and range addresses
(3 answers)
Closed 1 year ago.
I have a Visual Studio project, which is developed locally. Code files have to be deployed to a remote server. The only problem is the URLs they contain, which are hard-coded.
The project contains URLs such as ?page=one. For the link to be valid on the server, it must be /page/one .
I've decided to replace all URLs in my code files with sed before deployment, but I'm stuck on slashes.
I know this is not a pretty solution, but it's simple and would save me a lot of time. The total number of strings I have to replace is fewer than 10. A total number of files which have to be checked is ~30.
An example describing my situation is below:
The command I'm using:
sed -f replace.txt < a.txt > b.txt
replace.txt which contains all the strings:
s/?page=one&/pageone/g
s/?page=two&/pagetwo/g
s/?page=three&/pagethree/g
a.txt:
?page=one&
?page=two&
?page=three&
Content of b.txt after I run my sed command:
pageone
pagetwo
pagethree
What I want b.txt to contain:
/page/one
/page/two
/page/three
The easiest way would be to use a different delimiter in your search/replace lines, e.g.:
s:?page=one&:pageone:g
You can use any character as a delimiter that's not part of either string. Or, you could escape it with a backslash:
s/\//foo/
Which would replace / with foo. You'd want to use the escaped backslash in cases where you don't know what characters might occur in the replacement strings (if they are shell variables, for example).
The s command can use any character as a delimiter; whatever character comes after the s is used. I was brought up to use a #. Like so:
s#?page=one&#/page/one#g
A very useful but lesser-known fact about sed is that the familiar s/foo/bar/ command can use any punctuation, not only slashes. A common alternative is s#foo#bar#, from which it becomes obvious how to solve your problem.
add \ before special characters:
s/\?page=one&/page\/one\//g
etc.
In a system I am developing, the string to be replaced by sed is input text from a user which is stored in a variable and passed to sed.
As noted earlier on this post, if the string contained within the sed command block contains the actual delimiter used by sed - then sed terminates on syntax error. Consider the following example:
This works:
$ VALUE=12345
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
MyVar=12345
This breaks:
$ VALUE=12345/6
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
sed: -e expression #1, char 21: unknown option to `s'
Replacing the default delimiter is not a robust solution in my case as I did not want to limit the user from entering specific characters used by sed as the delimiter (e.g. "/").
However, escaping any occurrences of the delimiter in the input string would solve the problem.
Consider the below solution of systematically escaping the delimiter character in the input string before having it parsed by sed.
Such escaping can be implemented as a replacement using sed itself, this replacement is safe even if the input string contains the delimiter - this is since the input string is not part of the sed command block:
$ VALUE=$(echo ${VALUE} | sed -e "s#/#\\\/#g")
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
MyVar=12345/6
I have converted this to a function to be used by various scripts:
escapeForwardSlashes() {
# Validate parameters
if [ -z "$1" ]
then
echo -e "Error - no parameter specified!"
return 1
fi
# Perform replacement
echo ${1} | sed -e "s#/#\\\/#g"
return 0
}
this line should work for your 3 examples:
sed -r 's#\?(page)=([^&]*)&#/\1/\2#g' a.txt
I used -r to save some escaping .
the line should be generic for your one, two three case. you don't have to do the sub 3 times
test with your example (a.txt):
kent$ echo "?page=one&
?page=two&
?page=three&"|sed -r 's#\?(page)=([^&]*)&#/\1/\2#g'
/page/one
/page/two
/page/three
replace.txt should be
s/?page=/\/page\//g
s/&//g
please see this article
http://netjunky.net/sed-replace-path-with-slash-separators/
Just using | instead of /
Great answer from Anonymous. \ solved my problem when I tried to escape quotes in HTML strings.
So if you use sed to return some HTML templates (on a server), use double backslash instead of single:
var htmlTemplate = "<div style=\\"color:green;\\"></div>";
A simplier alternative is using AWK as on this answer:
awk '$0="prefix"$0' file > new_file
You may use an alternative regex delimiter as a search pattern by backs lashing it:
sed '\,{some_path},d'
For the s command:
sed 's,{some_path},{other_path},'
We have a process which can use a file containing sed commands to alter piped input.
I need to replace a placeholder in the input with a variable value, e.g. in a single -e type of command I can run;
$ echo "Today is XX" | sed -e "s/XX/$(date +%F)/"
Today is 2012-10-11
However I can only specify the sed aspects in a file (and then point the process at the file), E.g. a file called replacements.sed might contain;
s/XX/Thursday/
So obviously;
$ echo "Today is XX" | sed -f replacements.sed
Today is Thursday
If I want to use an environment variable or shell value, though, I can't find a way to make it expand, e.g. if replacements.txt contains;
s/XX/$(date +%F)/
Then;
$ echo "Today is XX" | sed -f replacements.sed
Today is $(date +%F)
Including double quotes in the text of the file just prints the double quotes.
Does anyone know a way to be able to use variables in a sed file?
This might work for you (GNU sed):
cat <<\! > replacements.sed
/XX/{s//'"$(date +%F)"'/;s/.*/echo '&'/e}
!
echo "Today is XX" | sed -f replacements.sed
If you don't have GNU sed, try:
cat <<\! > replacements.sed
/XX/{
s//'"$(date +%F)"'/
s/.*/echo '&'/
}
!
echo "Today is XX" | sed -f replacements.sed | sh
AFAIK, it's not possible. Your best bet will be :
INPUT FILE
aaa
bbb
ccc
SH SCRIPT
#!/bin/sh
STRING="${1//\//\\/}" # using parameter expansion to prevent / collisions
shift
sed "
s/aaa/$STRING/
" "$#"
COMMAND LINE
./sed.sh "fo/obar" <file path>
OUTPUT
fo/obar
bbb
ccc
As others have said, you can't use variables in a sed script, but you might be able to "fake" it using extra leading input that gets added to your hold buffer. For example:
[ghoti#pc ~/tmp]$ cat scr.sed
1{;h;d;};/^--$/g
[ghoti#pc ~/tmp]$ sed -f scr.sed <(date '+%Y-%m-%d'; printf 'foo\n--\nbar\n')
foo
2012-10-10
bar
[ghoti#pc ~/tmp]$
In this example, I'm using process redirection to get input into sed. The "important" data is generated by printf. You could cat a file instead, or run some other program. The "variable" is produced by the date command, and becomes the first line of input to the script.
The sed script takes the first line, puts it in sed's hold buffer, then deletes the line. Then for any subsequent line, if it matches a double dash (our "macro replacement"), it substitutes the contents of the hold buffer. And prints, because that's sed's default action.
Hold buffers (g, G, h, H and x commands) represent "advanced" sed programming. But once you understand how they work, they open up new dimensions of sed fu.
Note: This solution only helps you replace entire lines. Replacing substrings within lines may be possible using the hold buffer, but I can't imagine a way to do it.
(Another note: I'm doing this in FreeBSD, which uses a different sed from what you'll find in Linux. This may work in GNU sed, or it may not; I haven't tested.)
I am in agreement with sputnick. I don't believe that sed would be able to complete that task.
However, you could generate that file on the fly.
You could change the date to a fixed string, like
__DAYOFWEEK__.
Create a temp file, use sed to replace __DAYOFWEEK__ with $(date +%Y).
Then parse your file with sed -f $TEMPFILE.
sed is great, but it might be time to use something like perl that can generate the date on the fly.
To add a newline in the replacement expression using a sed file, what finally worked for me is escaping a literal newline. Example: to append a newline after the string NewLineHere, then this worked for me:
#! /usr/bin/sed -f
s/NewLineHere/NewLineHere\
/g
Not sure it matters but I am on Solaris unix, so not GNU sed for sure.
Chip,Dirkland,DrobæSphere Inc,cdirkland#hotmail.com,usa
I've been trying to use sed to modify email addresses in a .csv but the line above keeps tripping me up, using commands like:
sed -i 's/[\d128-\d255]//' FILENAME
from this stackoverflow question
doesn't seem to work as I get an 'invalid collation character' error.
Ideally I don't want to change that combined AE character at all, I'd rather sed just skip right over it as I'm not trying to manipulate that text but rather the email addresses. As long as that AE is in there though it causes my sed substitution to fail after one line, delete the character and it processes the whole file fine.
Any ideas?
This might work for you (GNU sed):
echo "Chip,Dirkland,DrobæSphere Inc,cdirkland#hotmail.com,usa" |
sed 's/\o346/a+e/g'
Chip,Dirkland,Droba+eSphere Inc,cdirkland#hotmail.com,usa
Then do what you have to do and after to revert do:
echo "Chip,Dirkland,Droba+eSphere Inc,cdirkland#hotmail.com,usa" |
sed 's/a+e/\o346/g'
Chip,Dirkland,DrobæSphere Inc,cdirkland#hotmail.com,usa
If you have tricky characters in strings and want to understand how sed sees them use the l0 command (see here). Also very useful for debugging difficult regexps.
echo "Chip,Dirkland,DrobæSphere Inc,cdirkland#hotmail.com,usa" |
sed -n 'l0'
Chip,Dirkland,Drob\346Sphere Inc,cdirkland#hotmail.com,usa$
sed -i 's/[^[:print:]]//' FILENAME
Also, this acts like dos2unix
The issue you are having is the local.
if you want to use a collation range like that you need to change the character type and the collation type.
This fails as \x80 -> \xff are invalid in a utf-8 string.
note \u0080 != \x80 for utf8.
anyway to get this to work just do
LC_ALL=C sed -i 's/[\d128-\d255]//' FILENAME
this will override LC_CTYPE and LC_COLLATE for the one command and do what you want.
I came here trying this sed command s/[\x00-\x1F]/ /g;, which gave me the same error message.
in this case it simply suffices to remove the \x00 from the collation, yielding s/[\x01-\x1F]/ /g;
Unfortunately it seems like all characters above and including \x7F and some others are disallowed, as can be seen with this short script:
for (( i=0; i<=255; i++ )); do
printf "== $i - \x$(echo "ibase=10;obase=16;$i" | bc) =="
echo '' | sed -E "s/[\d$i-\d$((i+1))]]//g"
done
Note that the problem is only the use of those characters to specify a range. You can still list them all manually or per script. E.g. to come back to your example:
sed -i 's/[\d128-\d255]//' FILENAME
would become
c=; for (( i=128; i<255; i++ )); do c="$c\d$i"; done
sed -i 's/['"$c"']//' FILENAME
which would translate to:
sed -i 's/[\d128\d129\d130\d131\d132\d133\d134\d135\d136\d137\d138\d139\d140\d141\d142\d143\d144\d145\d146\d147\d148\d149\d150\d151\d152\d153\d154\d155\d156\d157\d158\d159\d160\d161\d162\d163\d164\d165\d166\d167\d168\d169\d170\d171\d172\d173\d174\d175\d176\d177\d178\d179\d180\d181\d182\d183\d184\d185\d186\d187\d188\d189\d190\d191\d192\d193\d194\d195\d196\d197\d198\d199\d200\d201\d202\d203\d204\d205\d206\d207\d208\d209\d210\d211\d212\d213\d214\d215\d216\d217\d218\d219\d220\d221\d222\d223\d224\d225\d226\d227\d228\d229\d230\d231\d232\d233\d234\d235\d236\d237\d238\d239\d240\d241\d242\d243\d244\d245\d246\d247\d248\d249\d250\d251\d252\d253\d254\d255]//' FILENAME
In this case there is a way to just skip non-ASCII chars, not bothering with removing.
LANG=C sed /someemailpattern/
See https://bugzilla.redhat.com/show_bug.cgi?id=440419 and Will sed (and others) corrupt non-ASCII files?.
How about using awk for this. We setup the Field Separator to nothing. Then loop over each character. Use an if loop to check if it matches our character class. If it does we print it else we ignore it.
awk -v FS="" '{for(i=1;i<=NF;i++) if($i ~ /[A-Za-z,.# ]/) printf $i}'
Test:
[jaypal:~/Temp] echo "Chip,Dirkland,DrobæSphere Inc,cdirkland#hotmail.com,usa" |
awk -v FS="" '{for(i=1;i<=NF;i++) if($i ~ /[A-Za-z,.# ]/) printf $i}'
Chip,Dirkland,DrobSphere Inc,cdirkland#hotmail.com,usa
Update:
awk -v FS="" '{for(i=1;i<=NF;i++) if($i ~ /[A-Za-z,.# ]/) printf $i; printf "\n"}' < datafile.csv > asciidata.csv
I have added printf "\n" after the loop to keep the lines separate.
I need to replace several URLs in a text file with some content dependent on the URL itself. Let's say for simplicity it's the first line of the document at the URL.
What I'm trying is this:
sed "s/^URL=\(.*\)/TITLE=$(curl -s \1 | head -n 1)/" file.txt
This doesn't work, since \1 is not set. However, the shell is getting called. Can I somehow push the sed match variables to that subprocess?
The accept answer is just plain wrong. Proof:
Make an executable script foo.sh:
#! /bin/bash
echo $* 1>&2
Now run it:
$ echo foo | sed -e "s/\\(foo\\)/$(./foo.sh \\1)/"
\1
$
The $(...) is expanded before sed is run.
So you are trying to call an external command from inside the replacement pattern of a sed substitution. I dont' think it can be done, the $... inside a pattern just allows you to use an already existent (constant) shell variable.
I'd go with Perl, see the /e option in the search-replace operator (s/.../.../e).
UPDATE: I was wrong, sed plays nicely with the shell, and it allows you do to that. But, then, the backlash in \1 should be escaped. Try instead:
sed "s/^URL=\(.*\)/TITLE=$(curl -s \\1 | head -n 1)/" file.txt
Try this:
sed "s/^URL=\(.*\)/\1/" file.txt | while read url; do sed "s#URL=\($url\)#TITLE=$(curl -s $url | head -n 1)#" file.txt; done
If there are duplicate URLs in the original file, then there will be n^2 of them in the output. The # as a delimiter depends on the URLs not including that character.
Late reply, but making sure people don't get thrown off by the answers here -- this can be done in gnu sed using the e command. The following, for example, decrements a number at the beginning of a line:
echo "444 foo" | sed "s/\([0-9]*\)\(.*\)/expr \1 - 1 | tr -d '\n'; echo \"\2\";/e"
will produce:
443 foo
I have been through the sed one liners but am still having trouble with my goal. I want to substitue matching strings on all but the first occurrence of a line. My exact usage would be:
$ echo 'cd /Users/joeuser/bump bonding/initial trials' | sed <<MAGIC HAPPENS>
cd /Users/joeuser/bump\ bonding/initial\ trials
The line replaced the space in bump bonding with the slash space bump\ bonding so that I can execute this line (since when the spaces aren't escaped I wouldn't be able to cd to it).
Update: I solved this by just using single quotes and outputting
cd 'blah blah/thing/another space/'
and then using source to execute the command. But it didn't answer my question. I'm still curious though... how would you use sed to fix it?
s/ /\\ /2g
The 2 specifies that the second one should apply, and the g specifies that all the rest should apply too. (This probably only works on GNU sed. According to the Open Group Base Specification, "If both g and n are specified, the results are unspecified.")
You can avoid the problem with g and n
Replace all of them, then undo the first one:
sed -e 's/ /\\ /g' -e 's/\\ / /1'
Here's another method which uses the t branch-if-substituted command:
sed ':a;s/\([^ ]* .*[^\\]\) \(.*\)/\1\\ \2/;ta'
which has the advantage of leaving existing backslash-space sequences in the input intact.
use awk
$ echo cd 'blah blah/thing/another space/' | awk '{for(i=2;i<NF;i++) $i=$i"\\"}1'
cd blah\ blah/thing/another\ space/
$ echo 'cd /Users/joeuser/bump bonding/initial trials' | awk '{for(i=2;i<NF;i++) $i=$i"\\"}1'
cd /Users/joeuser/bump\ bonding/initial\ trials