I'm using emacs 23 on ubuntu 10.04. I would like to remap the "C-[" binding. Currently, when I press it, it gives me "ESC". Is there a way to remap it?
This is not an Emacs binding, but has global effect in X and it's used as handier substitute for ESC for people practicing touch typing. I guess you'll have to modify the X keymap if you want to use it in another fashion, but I wouldn't advice that.
C-[ is the ASCII ESCAPE character, which Emacs usually writes as ESC.
There is no key involved here (it's a character), and there is no key binding involved here. Or rather, your keyboard's Escape key sends the control character ESCAPE (also written C-[ and ESC).
Related
I am slightly confused by the difference between keys and key-bindings in emacs after reading the first chapter of "Writing GNU Emacs Extensions" (O'Reilly book).
The chapter starts by noting that in some emacs version the keys backspace and DEL, invoke the help menu instead of deleting. In other words, they invoke what is invoked by C-h.
The chapter then goes on to show how to change this behaviour using Lisp code. This is done by binding the keystroke C-h to the delete command.
This is a bit confusing to me. In my mind DEL, Backspace and C-h are three different keystrokes (the first two consisting of a single key).
Why does remapping C-h effect what DEL and Backspace does?
I would have thought to change what backspace does for example, you would remap backspace to another command, not the keystroke C-h.
Unless remapped by a low-level keybord driver, the effect of the Backspace key is to send the character with numeric code 8, which, in certain operating systems, is exactly the same code generated by pressing Control-h. You can verify this fact by simply writing anything on a unix (or linux) shell and then pressing Backspace and Control-h: both of them have the effect of erasing the previous character, since the character with numeric code 8 is interpreted by the operating system as the control character BS, backspace, used either to erase the last character printed or to overprint it (see wikipedia). Analogously, Control-J is equivalent to the RETURN key, etc.
The same Wikipedia page describe DEL as “originally intended to be an ignored character, but now used in some systems to erase a character”.
So, when you assign a command to a keystroke you are actually assigning a command to a character code, and if two or more keys generate the same code, by pressing them you are invoking the same command.
#Renzo answered your question about how these keys are related and how binding one can seem to affect another. Here is some more information about what's going on in this particular case.
See the Emacs manual, node DEL Does Not Delete.
There you will see this, following an explanation of the problem/confusion:
To fix the problem in every Emacs session, put one of the following
lines into your initialization file (*note Init File::). For the first
case above, where BACKSPACE deletes forwards instead of backwards, use
this line to make BACKSPACE act as DEL:
(normal-erase-is-backspace-mode 0)
For the other two cases, use this line:
(normal-erase-is-backspace-mode 1)
Another way to fix the problem for every Emacs session is to
customize the variable normal-erase-is-backspace: the value t
specifies the mode where BS or BACKSPACE is DEL, and nil
specifies the other mode. *Note Easy Customization::.
See also the GNU Emacs FAQ question about Backspace invoking help. There you will see, in addition to information similar to that above, information about how to remap DEL on UNIX - use this:
stty erase '^?'
Wrt C-j and RET (not mentioned in the question, but mentioned in #Renzo's answer): The default behavior of Emacs changed in most programming modes, in Emacs 24.4.
Starting with that release, electric--indent-mode is turned on by default, which means that RET inserts a newline character and indents, whereas C-j just inserts a newline character. Prior to that release, these keys had the opposite behaviors. If you prefer the old behavior then do this, to turn off electric-indent-mode:
(when (fboundp 'electric-indent-mode)
(electric-indent-mode -1)) ; Use classic `C-j' and `RET'.
In org-mode, pressing M-S-RET (meta-shift-return) will create a new TODO on a new line. This key sequence sends M-RET to emacs through my terminal. I've checked this with C-h c ESC-S-RET, which returns M-RET is undefined in the mini-buffer.
I'm using Snow Leopard with Emacs 23.2.1 running in Terminal.app. There is no option to define a RET sequence in the terminal keyboard preferences.
Any idea what's causing the missing SHIFT? Workarounds?
You can get Emacs to pretend that it got S-RET with C-x # S RET (note uppercase S).
This also works for adding control, meta, alt, hyper or super modifiers; type C-x # C-h for the list of bindings. The Modifier Keys section in the Emacs manual mentions this as well.
In general, lots of keystrokes are simply impossible to send via a terminal, since terminals emulate an old protocol that only allowed 256 separate keys (or maybe only 128).
Chances are, when you press S-RET, Terminal.app does exactly the same thing as if you'd pressed RET. Thus Emacs has no way to distinguish those two cases.
Cross-linking to other Q&As:
If you are using an xterm, then the modifyOtherKeys option may facilitate that binding. See the following for details:
Send "C-(" to Emacs in VT100/xterm terminal (Mac OS X's Terminal)?
I suspect Emacs recognises those codes by default, but if not then also see input-decode-map as described here: Binding M-<up> / M-<down> in Emacs 23.1.1
See explanation and alternative shortcuts for TTY here.
Some of these have worked for me in a terminal in Ubuntu Linux (both locally and over SSH), but not all of them seem to work. For example, the alternative provided for S-RET (which I expected to run org-table-copy-down) instead seems to run org-clone-subtree-with-time-shift for some reason. However, I have found the list of alternatives useful, particularly those with the M- prefix. For example ESC UP for M-UP to move text around in tables.
My problem is that I want to bind Control + Backspace combination to backward-delete-word function. However, it doesn't seem possible because emacs doesn't detect the Control key in combination with backspace.
I detected that by looking at the "logger" (C-h l). So if I press Backspace, it shows DEL. If I press Control + Backspace, it still shows DEL.
Is there any way to achieve that?
I have read and tried other questions, but couldn't fix it.
As #phils pointed out, if you are using Emacs in a terminal (e.g. emacs -nw) instead of as a GUI (no -nw command-line option), and if you are not on MS Windows, then by default certain key sequences are not available to you.
However, it might still be possible for you to configure the terminal (e.g., xterm) so that it in fact supports some such key sequences for Emacs. See this comment by the Emacs maintainer in the discussion of Emacs bug #10387.
(That said, you might find it simpler to just use a different key sequence. Or switch to the GUI version of Emacs.)
In GNU screen, I want to change the default command binding to Alt-s (by tweaking .screenrc) instead of the default C-a, the reason is I use emacs hence GNU screen binds the C-a key, sending "C-a" to the emacs becomes tedious (as #Nils said, to send "C-a" I should type "C-a a"), as well as "C-a" in bash shell, and I could change the escape to C- but some of them are already mapped in emacs and other combinations are not as easy as ALT-s . If anyone has already done a ALT key mapping, please do let me know.
It is possible to work around :escape command limitations using registers and :bindkey command. Just put this in .screenrc:
# reset escape key to the default
escape ^Aa
# auxiliary register
register S ^A
# Alt + x produces ^A and acts as an escape key
bindkey "^[x" process S
## Alt + space produces ^A and acts as an escape key
# bindkey "^[ " process S
See http://adb.cba.pl/gnu-screen-tips-page-my.html#howto-alt-key-as-escape
From my reading of man screen it seems like the only meta character that screen can use for the command binding is CTRL:
escape xy
Set the command character to x and the character generating a literal
command character (by triggering the "meta" command) to y (similar to
the -e option). Each argument is either a single character, a two-character
sequence of the form "^x" (meaning "C-x"), a backslash followed by an octal
number (specifying the ASCII code of the character), or a backslash followed
by a second character, such as "\^" or "\\". The default is "^Aa".
If there is some mapping that you don't use in emacs, even if it's inconvenient, like C-|, then you could use your terminal input manager to remap ALT-X to that, letting you use the ALT binding instead. That would be a little hackish though.
I'm an Emacs and screen user as well. Although I rarely use Emacs in a terminal -- and as such in a screen session -- I didn't want to give up C-a for the shell either (which uses Emacs key bindings). My solution was to use C-j as the prefix key for screen, which I was willing to sacrifice. In Emacs programming modes it is bound to (newline-and-indent) which I bound to RET as well, so I really don't miss it.
By the way: I know this is an advise rather than an answer, but I felt this would be valuable enough to post nevertheless.
To make Alt+X the default prefix for commands and free C-a, add the following lines to .screenrc:
escape ^||
bindkey "^[x" command
As a side effect C-| will be command prefix too. If you need this keys to be free too, then fix "escape ^||" accordingly.
Screen doesn't have any shorthand syntax for alt bindings, but you can give it the octal code directly. For instance on my machine, Alt-x has the hex code F8, or 370 octal, so putting
escape \370x
in my screenrc changed the escape code to alt-X
Tested and works with screen 4.00.03 on Linux.
You may have to change the escape, since I think this may depend on things like your language and codeset, etc: how I found out what my escape code was was to type
$ echo -n ^QM-x | perl -ne 'printf "%lo\n", ord($_)'
^Q is the quoted-insert command for readline (it inserts what you type directly without trying to interpret it) and M-x was a literal Alt-X.
Fellow emacs user here.
The best solution I've found is a ~/.screenrc file with the following:
# C-a :source .screenrc
escape ^gg
Live updated here: https://gist.github.com/1058111
See also: http://ubuntuforums.org/showthread.php?t=498675
Something I have had for years in my .screenrc:
escape ^Zz
which is now hardwired in muscle memory for me.
Somehow I ended up having to share a screen with someone else's config, and now I keep stopping processes all the time (bash ^Z)... Not funny...
I've recently started using screen in remote sessions. One problem is that emacs doesn't recognize its C-a and I don't want to bind emacs C-a to something else, as I'm very used to it.
Google shows ways to change every keybinding individually using ~/.screenrc but not how to change a keybinding globally. I want all C-a to change to something else. Is that possible? What are my options?
Thanks for your answers
You can change the escape combination via escape in .screenrc:
# Makes Control+b become the escape combination
escape ^Bb
You can also just use Ctrl + a a to pass a Ctrl + a to the child process. You get used to it after a while.