Is there a shortcut in Base SAS to provide focus to the command-line / display manager bar?
On a Windows PC, the F11 key will probably already be mapped to provide focus to the command bar, so I would suggest trying that first. F9 as you show in the other answer is typically mapped by default (again on Windows) to show the existing key-bindings (Same as going to Tools->Options->Keys).
Thanks to Trevor
dm "keydef F9 ""command focus;""";
Related
I have a need to use something else than the TAB key to achieve ALT+TAB functionality in Windows 10. (long story short - I'm using Parallells and remote desktop on a Mac, and need to keep the Remote Desktop setting "Apply Windows Key Combinations" set to "On this computer", so I can't just forward everything to the remote computer).
Using Autohotkey on the remote computer, I thought I could simply do something like
§::Send {Tab}
to be able to press ALT+§ instead of ALT+TAB, and have Parallells ignore it and just forward it as any other key (for example SHIFT+A to type an "A"). But it doesn't seem to work that way, nothing happens when holding down ALT and pressing § except a "pling" sound. Just pressing § alone prints a TAB character if I'm in a text editor.
I tried
^!§::Send ^!{Tab}
as well, same result.
For now I settled on using the following script instead, which lets me press § to bring up the ALT+TAB window, where I can either use arrow keys or the § key to select an application, and then Enter to switch to it:
§::Send ^!{Tab}
This is not bad, but it's annoying to have to use the Enter key to activate the window. So, is there any way to simply replace ALT+TAB with ALT+§ and get the normal functionality of the ALT+TAB window-switcher?
Use the hotkey <!§::AltTab.
<! means left alt and you can read more about AltTab here.
Also, AltTabMenuDismiss might be worth looking into related to the problem you outlined in the comments.
I want to run the select code of python in VScode. Till now, I have to copy the code and paste it in the terminal below to run. The system is mac OS.
So is there any way to run the code directly after I selected the code? For example, like the shortcuts.
Thanks.
There is no default keybindings for command "Run Selected Text in Active Terminal", but you can create one.
Press Ctrl+K, Ctrl+S to open File → Preferences → Keyboard Shortcuts.
Search for workbench.action.terminal.runSelectedText in keybindings.
Press the icon on the left to open a windnow with this message "Press desired key combination..." and make your choice. (I've pressed Ctrl+Alt+R - as this combination was not used yet.)
Press Enter to store your keybinding.
Tested on VSCode 1.30.2 on Windows 10 Pro.
#yanachen, this is now possible in VS Code. All you need to do is:
1. Ensure python is running in the VS Code terminal window
2. Select the text you wish to execute in python
3. Invoke the command 'workbench.action.terminal.runSelectedText' as defined in the following link:
https://code.visualstudio.com/docs/editor/integrated-terminal#_key-bindings
Now it's supported by default shortcut "shift" + "enter".
select the proper code snippet
press "shift" + "enter"
Here is the setting for running selection in "interactive window."
In my VS Code (version 1.56.2), I do the following things: go to Settings, search for interactive window, in the resulting left panel choose Jupyter, and finally check the box next to Jupyter: Send selection to interactive window. That's it. One more step for some users (including me) is to modify the keybinding for running selection to your preference. For example, got to keyboard shortcuts, type run selection, you should see a list of keybindings and you may need to redefine them if conflicts exist.
Some language specific extensions have already an existing keybinding.
On Windows, for the PowerShell extension it is currently F8 to run the selected text.
Install the vscode extension Node.js Exec. then select the block of code you want to run and press f8. worked for me.
I'm trying to attribute a custom shortcut key in Eclipse Kepler. It's for the Base from Working Copy in the Compare context menu any give file (via right click). This screenshot shows how it's been setup:
Pressing that key combination does absolutely nothing. ATM, other Compare sub menu commands are working fine (ie. CTRL+ALT+L). When I right click on a file > Compare, I can see the assigned shortcut in the context menu.
I've restarted Eclipse after assigning the shortcut to make sure it "takes" properly. Still to no avail.
It may be because of other commands also registered for the same short cut i.e Ctrl + Alt + L.
Please do verify how many commands are registered for the short cut Ctrl + Alt + L, by typing the "CTRL+ALT+L" text in the search box below the Scheme combo box.
If multiple command are registered then change the short of your command so that it become unique, then try the command and verify the result.
I have shifted by Dev Env recently to Eclipse Helios on Windows 7. After that the Ctrl + Space Content Assist feature is not working. I found out that that key option is utilized by Language Settings. I have tried disabling it. But it still doesn't work in Eclipse.
Any help is much appreciated.
Configure Eclipse’s content assist, go “Preferences>Java>Editor>Content Assist>Advanced“. Make sure “Other Java Proposals” is ticked.
http://www.mkyong.com/java/content-assist-ctrl-space-is-not-working-eclipse/
In my case nothing happens after pressing Ctrl+Space. Right now I have set a different short cut for the same and solved
Check your "Keys" preferences: maybe the Content Assist" shortcut has been overridden by another command which would also use Ctrl+Space.
That could happen with the installation of a new plugin, coming with its own set of commands and shortcuts: the bug 303894 for the XText plugin is a good example.
You probably have another application (in systray) that uses Ctrl+Space for something else. In my case I have a small utility which when I press Ctrl+Space makes the active window on top.
The solution for you would be to (1) exit that application which overrides the keys or (2) in Eclipse change Ctrl+Space to some other set of keys.
This was solution for me to get rid of windows key shortcuts:
Go to Start > Type in regedit and start it
Navigate to HKEY_CURRENT_USER/Control Panel/Input Method/Hot Keys
Select the key named: 00000070 for the Chinese (Traditional) IME -
Ime/NonIme Toggle hotkey 00000010 for the Chinese (Simplified) IME -
Ime/NonIme Toggle hotkey
In the right sub-window, there are three subkeys. Key Modifiers
designate Alt/Ctrl/Shift/etc and is set to Ctrl (02c00000). Virtual
Key designates the finishing key and is set to Space (20000000).
Change the first byte in Key Modifiers from 02 to 00
Change the first byte in Virtual Key from 20 to FF
Log off and log back on. I don't think it's necessary to restart.
Do not change the Hot keys for input languages in Control Panel,
unless you want to do this all over again.
https://superuser.com/questions/327479/ctrl-space-always-toggles-chinese-ime-windows-7
I have seen a similar problem in Eclipse Juno (version 4.2.0).
Since you have already tried Eclipse/Java code completion not working, I would check to see if there are any key conflicts. Go to Window -> Preference -> General -> Keys. In the filter box, replace the light gray "type filter text" with the word "Content"; the first item should be "Content Assist." Select it. It should have nothing in the Conflicts box in the lower right-hand portion of the screen.
If you have no conflicts, then it is likely that there is another program, outside of Eclipse, that is binding to Ctrl + Space.
I worked around this with an ugly solution. I copied the Content Assist. In the Binding field, I entered held down the Ctrl + Alt keys and pressed space. This restored the Content Assist function, but it required a brain remap when I am using one machine.
!Screenshot of Eclipse Juno, I had the same problem, then I changed it to different key combination, then it works.1
This is what solved my problem.
Goto Control Panel -> Clock, Language and Region -> Change keyboards or other input methods -> Change keyboards... -> Advanced Key Settings. For some reason I had ctrl + space set as Key sequence for language hot keys. I changed them to something else and rebooted.
Make sure to reboot because it did not work for me without the reboot.
On my Ubuntu, Xfce, ctrl space was allocated to switch language on the iBus preferences (if you have this running, you will see the 'i' icon on the task bar, right click and choose preferences). To change this, bring up the IBus Preferences, on the General tab, see the "Enable or disable:" option, click the ellipses and provide a different keyboard assignment.
This sorted me out without need to restart Eclipse.
I use eclipse indigo and had this problem. Creating a new workspace did not worked.
Go to Windows->preference->General->Keys->"Restore Default" - This fixed my issue
Note that I just had English(US) on windows 7 [Control Panel-> Clock,Language and Region ->Change keyboard or other input methods-> Keyboards and Languages->change Keyboards...->General ==>Default language is English and Installed Services I just had English(US) alone
After doing this some you might need to restart the system if it does not fix.
This is how I fixed my problem on Ubuntu 12.04 regardless of the eclipse version. My problem was that the ibus was overriding the shortcut so I deleted this shortcut configuration.
Type ibus in the dash:
Then select Keyboard Input Methods. From there click on the first three dots next to the Enable or disable textfield. This windows should appear:
If there is something bound to Ctrl + Space simply delete it.
#Polac - Thx. That's what fixed it for me. I'd hit ctrl+space and I'd get a popup for chinese character selection. I have Windows 7 so for me it was:
Control Panel -> Region and Language -> Keyboards and Languages tab -> Change keyboards... button -> Advanced Key Settings tab
Be warned, its stubborn. I tried to just clear them, but as soon as I applied the settings they reset back to using the original key bindings. If I change the key binding to something obscure they still reset sometimes. It's annoying. Maybe its just my OS installation that's goofed, but it could be a Microsoft bug.
Didn't need Chinese on my system, so I removed it as an installed language in the first tab and that finally got rid of the hardcoded Chinese key bindings.
In Eclipse you can use the Alt-/ character sequense instead of Control-Space. This is an old problem which Eclipse and Chinese keyboards, which they addressed by adding this short cut.
I found the answer.
Windows / UV Elements - was OFF! I don't know how but they were off. And when you click Ctrl+Space he working, but your all elements are off and you think that it is not working. You must on all UV elements and after your Ctrl + Space will be work.
I want to be able to switch from one file to another in the Eclipse editor (in the Java perspective) from the keyboard (and bind those key combinations to buttons on my mouse). What are the shortcut keys for switching the current tab to the next or previous?
Mac OS X:
Fn+Cntrl+↑
Fn+Cntrl+↓
Effectively Cntrl+page up/page down as given in the first comment for #wibbe01's answer.
According to this thread, switching editors are:
Shift+Command+F6
Command+F6
, which you can remap to:
Shift+Command+Tab
Command+Tab
Note, as mentioned in that same thread:
Command+E lists all the opened editors, allowing to quickly select one
Shift+Command+L lists all the active key bindings.
The bug 86248 helped introduced the Cntrl+↑ and Cntrl+↓, which Bjorn Tipling reports working on Mac with a Fn in front of it.
If I were you I would just go to the eclipse menu, then preferences. Under the general section of the tree there is a section called "Keys" In there you will find things for "Next Editor" or whatever other keyboard shortcuts you are looking for. Map them to what makes sense to you....then you're happy like this :) or maybe even like this :D.
Enjoy.
In Eclipse's preference panel, go to Keys. The command is called Next Tab and Previous Tab, just map these to whatever you want. In my case since I normally use mvim are:
⌘+⇧+[
⌘+⇧+]
You can change all shortcut keys in preferences by pressing ctrl+shift+L 2 times . Switching tab in Eclipse (ctrl+F6) is not easy to press. So you can make it ctrl+tab or whatever you want.
Since I have my F keys mapped to the default setting, I had to use fn-command-F8
I figured it out by first confirming command-F8 was indeed mapped under command-shift-L