Hi can somebody help me with the Matlab command here. I've got to determine the highest point in a filled contour I've plotted using matrix data in a file. And then I have to mark the highest point with a red x.
load('0101862_mod.dtm') % loading the dtm file
X = X0101862_mod(1:81,:) % we name X0101862, it is the location where the data X, Y and Z is stored
Y = X0101862_mod(82:162,:)
Z = X0101862_mod (163:243,:)
figure (1)
subplot(2,2,3)
[C,h] = contourf(X,Y,Z,10);
xlabel('x'); ylabel('y'); zlabel('z'); title('X0101862_mod');
view(-73,34); axis equal; colormap summer; colorbar;
i know it involves max command. Kept getting error when i use max.
To plot the red 'X', you have to call first hold on to make sure that the second plotting command won't erase the contour. Then, you use plot(xMax,yMax,'xr') to plot a red 'x' at the x/y coordinates where z is at its maximum.
To find xMax and yMax, you have to use the second output argument of max. MAX returns, as first output, the maximum (e.g. of Z), and as a second output, it returns the number of the element that is maximal. Use that number (the index) to find the elements in X and Y that correspond to the maximum Z-value, i.e. xMax and yMax.
Related
I want to set the limit for X axis in this plot from 0 to 325. When i am using xlim to set the limits (commented in the code). It doesn't work properly. When i use xlim, the entire structure of plot changes. Any help will be appreciated.
figure
imagesc(transpose(all_area_for_visual));
colormap("jet")
colorbar('Ticks',0:3,'TickLabels',{'Home ','Field','Bad house','Good house'})
xlabel('Time (min)')
tickLocs = round(linspace(1,length(final_plot_mat_missing_part(2:end,1)),8));
timeVector = final_plot_mat_missing_part(2:end,1);
timeForTicks = (timeVector(tickLocs))./60;
xticks(tickLocs);
xticklabels(timeForTicks);
%xlim([0 325]);
ylabel('Car identity')
yticks(1:length(Ucolumnnames_fpm))
yticklabels([Ucolumnnames_fpm(1,:)])
If I get you right, you want to plot only part of the data in all_area_for_visual, given by a condition on tickLocs. So you should first condition the data, and then plot it:
% generate the vector of x values:
tickLocs = round(linspace(1,length(final_plot_mat_missing_part(2:end,1)),8));
% create an index vector (of logicals) that marks the columns to plot from the data matix:
validX = tickLocs(tickLocs<=325);
% plot only the relevant part of the data:
imagesc(transpose(all_area_for_visual(:,validX)));
% generate the correct ticks for the data that was plotted:
timeVector = final_plot_mat_missing_part(2:end,1);
timeForTicks = (timeVector(tickLocs(validX)))./60;
xticks(tickLocs(validX));
% here you continue with setting the labels, colormap and so on...
imagesc puts the data in little rectangles centered around integers 1:width and 1:height by default. You can specify what the x and y locations of each data point by adding two vectors to the call:
imagesc(x,y,transpose(all_area_for_visual));
where x and y are vectors with the locations along the x and y axes you want to place the data.
Note that xlim and xticks don’t change the location of the data, only the region of the axis shown, and the location of tick marks along the axis. With xticklabels you can change what is shown at each tick mark, so you can use that to “fake” the data locations, but the xlim setting still applies to the actual locations, not to the labels assigned to the ticks.
I think it is easier to plot the data in the right locations to start with. Here is an example:
% Fake your data, I'm making a small matrix here for illustration purposes
all_area_for_visual = min(floor(cumsum(rand(20,5)/2)),3);
times = linspace(0,500,20); % These are the locations along the time axis for each matrix element
car_id_names = [4,5,8,15,18]; % These are the labels to put along the y-axis
car_ids = 1:numel(car_id_names); % These are the locations to use along the y-axis
% Replicate your plot
figure
imagesc(times,car_ids,transpose(all_area_for_visual));
% ^^^ ^^^ NOTE! specifying locations
colormap("jet")
colorbar('Ticks',0:3,'TickLabels',{'Home ','Field','Bad house','Good house'})
xlabel('Time (min)')
ylabel('Car identity')
set(gca,'YTick',car_ids,'YTickLabel',car_id_names) % Combine YTICK and YTICKLABEL calls
% Now you can specify your limit, in actual time units (min)
xlim([0 325]);
I wish to highlight/mark some parts of a array via plot in MATLAB. After some research (like here) I tried to hold the first plot, find the indexes for highlighting and then a new plot, only with those points. However, those points are being drawn but all shifted to the beginning of the axis:
I'm currently trying using this code:
load consumer; % the main array to plot (157628x10 double) - data on column 9
load errors; % a array containing the error indexes (1x5590 double)
x = 1:size(consumer,1)'; % returns a (157628x1 double)
idx = (ismember(x,errors)); % returns a (157628x1 logical)
fig = plot(consumer(:,9));
hold on, plot(consumer(idx,9),'r.');
hold off
Another thing I would like to do was highlighting the whole section of the graph, like a "patch" on the same sections. Any ideas?
The trouble is that you are only providing the y-axis data to the plot function. By default, this means all data is plotted on the 1:numel(y) x locations of your plot, where y is your y-axis data.
You have 2 options...
Also provide x-axis data. You've already got the array x anyway!
figure; hold on;
plot(x, consumer(:,9));
plot(x(idx), consumer(idx,9), 'r.');
Aside: I'm slightly confused why you create idx. If errors is as you describe it (indexes of the array) then you should just be able to use consumer(errors,9).
Make all data which you don't want to appear equal to NaN. Because of the way you're loading your error indices in, this is less quick and easy. Basically you'd copy consumer(:,9) into a new variable, and index all undesirable points to set them equal to NaN.
This method has the benefit of breaking up discontinuous sections too.
y = consumer(:,9); % copy your y data before changes
idx = ~ismember(x, errors); % get the indices you *don't* want to re-plot
y(idx) = NaN; % Set equal to NaN so they aren't plotted
figure; hold on;
plot(x, consumer(:,9));
plot(x, y, 'r'); % Plot all points, NaNs wont show
I want to set the Y axis beginning value equal to 1e-20, but MATLAB always gives zero. My variable, which is meanerror has a value of 1e-15. So MATLAB's distances between the Y axis values are very big and whatever I do, I don't see 1e-15 in this graph.
Actually,I want to see 1e-15 after beginning any value which is not zero on Y axis. May be between 1e-20 (beginning value) and 1e-10.
How can I do that ?
Here is the code :
plot(x,meanerror,'Color','k');
set(gca, 'Ticklength', [0 0]);
set(gca,'xlim',[0 3e5]);
set(gca,'XTickLabel',{'0','','1E+5','','2E+5','','3E+5'});
set(gca,'ylim',[1e-20 1e3]);
Here is the graph:
I was wondering if you could advise me how I can connect several points together exactly one after each other.
Assume:
data =
x y
------------------
591.2990 532.5188
597.8405 558.6672
600.0210 542.3244
606.5624 566.2938
612.0136 546.6825
616.3746 570.6519
617.4648 580.4575
619.6453 600.0688
629.4575 557.5777
630.5477 584.8156
630.5477 618.5906
639.2696 604.4269
643.6306 638.2019
646.9013 620.7697
652.3525 601.1584
"data" is coordinate of points.
Now, I would like to connect(plot) first point(1st array) to second point, second point to third point and so on.
Please mind that plot(data(:,1),data(:,2)) will give me the same result. However, I am looking for a loop which connect (plot) each pair of point per each loop.
For example:
data1=data;
figure
scatter(X,Y,'.')
hold on
for i=1:size(data,1)
[Liaa,Locbb] = ismember(data(i,:),data1,'rows');
data1(Locbb,:)=[];
[n,d] = knnsearch(data1,data(i,:),'k',1);
x=[data(i,1) data1(n,1)];
y=[data(i,2) data1(n,2)];
plot(x,y);
end
hold off
Although, the proposed loop looks fine, I want a kind of plot which each point connect to maximum 2 other points (as I said like plot(x,y))
Any help would be greatly appreciated!
Thanks for all of your helps, finally a solution is found:
n=1;
pt1=[data(n,1), data(n,2)];
figure
scatter(data(:,1),data(:,2))
hold on
for i=1:size(data,1)
if isempty(pt1)~=1
[Liaa,Locbb] = ismember(pt1(:)',data,'rows');
if Locbb~=0
data(Locbb,:)=[];
[n,d] = knnsearch(data,pt1(:)','k',1);
x=[pt1(1,1) data(n,1)];
y=[pt1(1,2) data(n,2)];
pt1=[data(n,1), data(n,2)];
plot(x,y);
end
end
end
hold off
BTW it is possible to delete the last longest line as it is not related to the question, if someone need it please let me know.
You don't need to use a loop at all. You can use interp1. Specify your x and y data points as control points. After, you can specify a finer set of points from the first x value to the last x value. You can specify a linear spline as this is what you want to accomplish if the behaviour you want is the same as plot. Assuming that data is a 2D matrix as you have shown above, without further ado:
%// Get the minimum and maximum x-values
xMin = min(data(:,1));
xMax = max(data(:,1));
N = 3000; % // Specify total number of points
%// Create an array of N points that linearly span from xMin to xMax
%// Make N larger for finer resolution
xPoints = linspace(xMin, xMax, N);
%//Use the data matrix as control points, then xPoints are the values
%//along the x-axis that will help us draw our lines. yPoints will be
%//the output on the y-axis
yPoints = interp1(data(:,1), data(:,2), xPoints, 'linear');
%// Plot the control points as well as the interpolated points
plot(data(:,1), data(:,2), 'rx', 'MarkerSize', 12);
hold on;
plot(xPoints, yPoints, 'b.');
Warning: You have two x values that map to 630.5477 but produce different y values. If you use interp1, this will give you an error, which is why I had to slightly perturb one of the values by a small amount to get this to work. This should hopefully not be the case when you start using your own data. This is the plot I get:
You'll see that there is a huge gap between those two points I talked about. This is the only limitation to interp1 as it assumes that the x values are strictly monotonically increasing. As such, you can't have the same two points in your set of x values.
For this given example:
a=rand(100,1)
ecdf(a)
The obtained plot will have on x proportion of bin values, and on y the proportion of points. I wanted to add a line y=0.5 (50% percent of values) and when cross the line in the plot gather and shows the predicted x value.
It is possible but it suppresses my knowledge.
Thanks in advance
Not sure I interpret your question correctly - but could it be as simple as
a=rand(100,1)
ecdf(a)
hold on
plot([0 1],[1 1]*0.5);
This adds a line at a height of 0.5 from 0 to 1 (which I believe are the limits of the plot that ecdf produced for you).
If you want to find the point where these two lines intersect, you need to obtain the points in the plot using a different form of the ecdf function:
a = rand(100,1)
[f x] = ecdf(a);
figure
plot(x, f); % now you have to make the plot yourself...
hold all
plot(x, 0.5 * ones(size(x))); % add the line at y=0.5
title 'cumulative probability of rand()'
xest = interp1(f, x, 0.5); % interpolate - find x where f would be 0.5
fprintf(1, 'The intercept is at x=%.2f\n", xest);