Can't seem change the name of my iPhone app 100%.
I followed multiple threads and performed the outlined methods below, but the old name keeps popping back up in Console. I'm concerned that on some deeper level the app's name has not really been changed 100%.
My concern is with the fact that I've made a "Lite" version by starting with a copy of the "Full" version. So I don't want the device to get confused if my customers upgrade and download the full version and the device see two apps with the same "CORE or ROOT" name.
Console continues to output:
2010-07-03 10:56:35.129 *OldAppName* [45672.207] Test Message
I have changed the Product_name, ".app" name, Bundle name, etc... - Where does "Console" get this name, so I can truly change the app's name 100%? I don't want an conflicts with the full version down the road as the apps grown independently in complexity. (i.e. Push Notifications, iAds, and other "APP" specific items)
I have performed the following, but still not getting 100% name change:
I. I have used Xcode, Project, Rename.
II. I have used the suggested answer on stackoverflow thread, Changing iPhone App's Name, to
Go to Targets in Xcode,
"Get Info" on your project's target (your current silly development name),
Search for "Product Name" under "Packaging". Change the value of that what you want the new program name is going to be.
My "Product_Name" field was blank for all builds, I changed it to the new name, but I continue to get the console output referencing the OldAppName.
III. I'm not trying to change the "Bundle Name", those are the same, as this is a Lite Version. And changing this does not change the Console reference name anyway, I tried.
IV. I have deleted the entire "Build" folder several times to assure no legacy issues, but the name still does not change.
I'm currently working on a large copy/paste migration over to a new project to try and fix this completely with a new project, because I would like to get app uploaded to the AppStore asap, but there must be a better way of achieving this.
Where does the "Console" get this name? Does this mean that if my customers' download the full version that on some deeper level the device will get confused-(i.e. NSUserDefaults with the same names, running issue, sandbox issues, etc...)?
The names are not stored in the info.plist, they appear to just be referenced from the target, but when I search through the target, I don't even find the OldAppName, is their an additional storage file for this core information?
I would like to stay in Xcode if possible. I have seen suggestions about using other programs or trying to change the XML directly through text editor, but I don't want to accidentally leave a "Third-Party" application marker or trial that might get rejected by Apple Reviewer's as they seem to be coming down hard on this issue.
Any detailed suggestions??
I had the same problem about a year ago.
I've got really nice & easy solution for your needs. You need to click on the "superview" of blue icon (Project/Targets) and then hit enter to change the name of the project. You can also double click on that field, but you need to do it with quite a long delay between clicks.
This method will change magically name of the project in all important places.
http://i.stack.imgur.com/3f1RD.png
Only Solution that Worked, and it was the one that feared the most and was trying to avoid.
I had to start a new project and painstakingly move all 96 class files (about 27mb of text) over one by one, because dragging the classes over kept giving me an error. I tried dragging over the classes as one large group, but that would not work. A little "re-factoring", rebuilding the .plist info, and setting up the new targets, and it I got it working again. I think that there was some sort of legacy issues that Xcode was getting caught up on.
It is working now under a new project, but there must be a better way.
Have you tried opening all files in your project in a text editor and searching for the old name?
Have you tried creating a new empty project and merely adding your content and code files to this empty project?
I have done these in the past and found they work fine:
http://drjunker.org/2008/04/10/xcode-rename-project-and-application-change-copyright-and-version-number/
http://homepage.mac.com/kelleherk/iblog/C1216817469/E1454445171/index.html
I also Clean All Targets/Builds and rename the Executable after.
I had a problem when there was a localized strings (infoPlist.strings) file in project with "CFBundleDisplayName"="MyOldAppName" in it. Removing this file and renaming target to my NewAppName worked for me.
Related
Recently I tried to build a flash application in Flash Builder, and I wanted to export it to my iPhone. I have gone through all the required steps in order to certify my application.
Now, with all that done, all that was left to be done is building the ".ipa" file in Flash Builder. Now, this gives the following error:
'Launching TestGame' has encountered a problem.
Error occurred while packaging the application:
NotBefore: Wed Apr 11 18:52:40 CEST 2012
Google didn't give me a decent answer, nor does Adobe's information regarding mobile application development. All I can think off, is that I can't build the application before that date. That's ridiculous, I can't imagine a certain check like that.
I'm pretty sure my ".p12" key file is generated correctly.
Is anyone else familiar with this error? Please, be so kind to guide me in the right direction.
Kind regards,
Matthias.
The error occurs because the compiler didn't find the files under the corresponding directory such as debug-bin or release-bin folder. (explains from: http://forums.adobe.com/thread/893772)
For example, if you are doing a debug-build, and you didn't select the project option: copy non-embeded files to the output folder. And debug-build needs some files such as icons files under the debug-bin folder, and it couldn't find it.
Solution: select project compiling option: the copy non-embeded file to the output folder.
Try again, if still not you will need to try the ADT build to get more details http://help.adobe.com/en_US/air/build/WS901d38e593cd1bac35eb7b4e12cddc5fbbb-8000.html
I suggest compiling from command line. I'd ported an AIR app to iOS and compiled using adt dirrectly (without FB or whatever), and there were more meanful messages then yours. Take a look at the manual on how to build ipa wit adt. The other advise is to check your iPhone node in app.xml (take a look here) and icons.
The "error" was thrown because the certificate wasn't valid yet. It became valid on the date shown above.
You could also fix the manifest file in the iOS developers center.
This problem does come up more often than needed. The error reporting is lacking distinctions but is also difficult to asses since there can be many factors causing this error. If it was one factor or even just a few then it would most likely let you know.
A great way to ensure that the error reporting can do its job and tell you where the problem is is to check your error log. It will tell you at least a few of the places that threw the block.
If you are unable to read those strange glyphs then just ensure that all your resources are being packaged. This does mean a little time of list checking but it is well worth it, for the errors and to get rid of development junk.
The first step in the asset list check is to go through each part of your Assets class (flash builder reference). If you do not have a direct Assets class then you may want to make one and move all of your asset calls to that one class - since it will save you time if this happens again.
Your Assets class is not the same as your Assets folder. Your folder is where the files are stored - i.e. images, bitmaps, sounds, etc. Your Assets class is what categorizes and assigns references to each individual file.
Go through your Assets class to ensure that each of those files exist in the folder as well. Then go to the Project menu (top near Navigate and Search) and select Clean. Either clean all your projects or check the current one. Once this is done you need to click on your Assets Folder (right click or highlight and hit edit or whatever), and select Refresh. This will check that all the files are still there and get rid of/update them.
If none of this throws an error -red X- or other errors then you need to check your project .xml file. This may take you some time to ensure that all of your add on packages and details are correct. Make sure you have the correct:
at the top and it matches your current air release.
Make sure all the filenames, names, ids, version numbers, aspect ratios, fullscreen, visible, icons, extensionIDs, and everything else are not only correct but actually there. Most of these statements should have something written and not be blank. If they are blank find out what to put in.
Ensure that you have the proper icon file extension. If it says assets/icon48.png and the icon48.png is actually in assets/pictures/images/icons/toomanyfilesextensions/whatever/icon48.png
you need to fix that link.
The last thing that you will need to check is when you want to either Release Build or Debug. You need to make sure that all assets are checked and selected.
Go to Project - Properties.
then select ActionScript Build Path.
Click the Native Extensions tab and see if there are any red X's. If there are tap the little arrow beside them and see what the matter it. Add the correct ANE or get rid of it or whatever you need to do.
Then in the same menu go to the left and select ActionScript Build Packaging. A little arrow should be beside that one too. Tap the arrow and it will open to Apple iOS, BlackBerry, Gooogle and whatever else you have (probably nothing more). Select the OS your want to use, lets say Apple, and you will have 4 tabs pop up. Make sure you have the correct certificates selected. If you have none or are confused about this you need to spend some time on Google.
The biggest one for this error is under the Package Contents tab. Most people miss this!
Open the tab and see if anything is not checked. There will 99.99% be something or many of them not checked if you are getting this error. Just check them all and you can figure out what you need and don't need later. Some of them will be listed because you just threw in a bunch of ANEs and .SWFs to have some awesome app. Those add on packages will throw in unnecessary contents into this package. That is fine and don't worry until you want to be picky. Just make sure they are all selected and hit Apply and Ok.
That's it. You should have a working Release Build if you did everything else correct and this error should be easy from now on (but time wasting).
You may get a 'slip' error now, but that is another story. But that is a great sign because you are getting closer to that stupid mistake that we all make: the elusive spelling mistake.
This problem has been KILLING me. I've been working on this app for 8 Months, and I am so close to finishing, I just can't seem to build for device. Building for the simulator works fine, but device always gives me the SAME 2 errors.
The 1st Error:
"Instruction requires a CPU feature not currently enabled"
From googling, I've found this probably means I'm not linking a binary I should be, but I'm not sure.
The 2nd Error:
If you can't read it, it says: Generating JWFNS.app.dSYM ... error: unable to open executable '/Users/ajr1188/Library/Developer/Xcode/DerivedData/JWFNS-azshgysfabycfagnebotitpcyaww/Build/Products/Debug-iphoneos/JWFNS.app/JWFNS'
This is the big one. I cannot seem to build the .app.dSYM file properly. I went in and deleted the build folder, I looked at EVERY stackoverflow question I could find and tried changing any random thing mentioned in another question, but all of it is to no avail. I'm so suck right now. AHH. PLEASE. Any help would be so appreciated!
Maybe your project has become hopelessly corrupted. One thing to try is to start a brand new project and copy/import all your sources/assets into the new project to see if that fixes the problem.
Another less nuclear (but perhaps more time consuming) approach is to binary search the build. Exclude absolutely everything except main.m and see if that fixes the problem. If it does, include half your sources, and buid again....repeat, trying to narrow in on the problem spot. Maybe a file or group of files has received special build settings that don't belong there.
I've had very similar problems, I cant remember the exact error message but it was very similar. Are you able to make a new project that will run on your device?
if so (and I know this sounds bad but it's worth a try) Create a new project and simply copy all the code and resources across and see if it still works. If it doesn't then there is something wrong with you code and you can continue trying to isolate the problem from there.
Hope this is helpful.
check the frameworks you link to. there's a chance that you linked a framework (say quartz) of osx, instead of ios.
Answering in detail is probably going to take looking at your target settings. But it looks like you may be building for the wrong architecture. (It doesn't link, so there is no .dSYM symbol file.) For example, if you have only recently built for device, you probably created your project under an older Xcode, and it may not have the arm6/arm7 settings right.
To check, show the Build Settings for your target (not the project), and filter on Architecture.
Make sure that in build settings the architectures are armv6 and armv7. Also make sure that in .plist file, the "Application requires iPhone environment" is TRUE. Delete "Required device capabilities" in the .plist if present.
Using Xcode 4.2, if I want to change my application/project name (including the name of the project folder and subfolder that are auto created by Xcode), what are the different items I need to update to make the whole thing compile and work again like a charm ?
I have noticed that I have to change the pch acces path, the bundle identifier, ... but I'm afraid of missing something.
It's really easy in Xcode 4. Simply double click (slowly) on your project name in the Navigator (the bar on the left). When you change the name of your project, Xcode will ask you to confirm which files to change (generally, it will be all of the ones necessary).
Alternately, if you simply want to change the name of your bundle (the name of your app as it appears in a users' home screen), you can just change your "Bundle Display Name" in your app plist.
An advice : NEVER change the name of your project without having saved the whole thing before. Even if XCode has a feature that helps to do this, using it may destroy all your hard work to organise your project, letting many many dirty things everywhere, not changing everything that needs to be changed, it's just awfull. I've tried this some days ago on a just simple project, letting XCode change the main things, but it has let so many things unchanged, or changed things without updating links, so I've had to rebuild a new project from the beginning to make it compile again.
If you just want to change the App name, select the project in xcode, select the app in TARGETS > YourAppOldName. Press enter, rename the OldName. Save, compile. thats all!
Change the config.xml from the main www directory
Here is the Name you want to change
here is description of your application
My team
Now rebuild app with CLI
phonegap build ios, phonegap install ios or phonegap run ios
I'm working with a designer friend on an iPhone app and he likes to refine all sorts of images relating to the project we're working on. All these images have been added to the project previously (and added to the project folder by xcode) and then are modified in their new location. When I preview the images in xCode, the updated images show up but building and running in the simulator or on a device doesn't pick up the new image. In fact, if I do a clean build it seems to ignore the image all together and blank spaces appear where images should be.
Now, I can delete these files from the project and re-add them and everything works peachy again. But there are a lot of them and I'd rather not do that every time an image is updated. Is there a way to get xCode to review and "learn" about these modified images? Is there a good reason for why it's not doing that automatically?
You didn't specify how you're including those image resources into your project, but I'd guess you're including them directly. So unless there's an underlying process that's changing the file in-place (are you using an SCM like Subversion or Perforce?) you're going to be forced to manually overwrite the files whenever your artist friend updates them.
You should include art assets in the project using a folder reference instead. (I'm still assuming you have some sort of SCM set up to handle exchanging data -- if you don't, set one up ASAP.) However, there are still some outstanding Xcode bugs related to picking up changes to files in a nested folder hierarchy included by reference, but at least you can work around that by doing clean builds when necessary.
I'm trying to create an ad-hoc build of an iPhone app for beta testing.
On their end, they're seeing an error like the following:
"The info.plist for application at xxx specifies a CFBundleExecutable of (null), which does not exist"
Here is an excerpt from the actual info.plist:
<key>CFBundleExecutable</key>
<string>${EXECUTABLE_NAME}</string>
And it clearly is not null.
What am I doing wrong here?
The WORKING SOLUTION is this (and only this):
In Xcode, choose “Executables” from the project hierarchy. Click your project executable then press Command-I. Choose the General tab and set the working directory to “Build Products directory”.
Found via BrainwashInc, who credits MacHackShack. I thought this valuable information was way too important to leave floating around on random blog.
It seems like sometimes XCode may flip this setting, as I suddenly started having this issue, and the fix above repaired it. Changing it back to "project directory" reproduces the issue for me, every time.
I also had to restart XCode to get the debugger to work once this fix installed the app, that may be unrelated.
I don't think there is ONE working solution to this. I found several solutions that doesn't work for me. At the end, I did find one solution.
By deleting whatever I had in the "Producs" folder in xCode I managed to get it working. I am using xCode 3.2.1.
Note: I did the change regarding "Build Products directory” above as well, perhaps both solutions needs to be implemented, up to you to try it out.
This is, to say the least, quite anoying. As a beginner, things are complicated enough without bugs in the SDK...
Hope this will help someone out there!
Cheers
It sounds like you're looking at the info.plist in the project not the built product.
The '${EXECUTABLE_NAME}' in the project info.plist is just a place holder for a variable in the build script. You need to look at the info.plist in your built product to see what is listed there. It sounds like for some reason, the build script is not populating the field as it should.
You might actually check that the contents of the application package actually has an executable. Sounds weird I know but a few years ago I mucked about with my build setting son a project and ended up with a product without an executable. Everything else, the package, resources, string files etc was there just no actual program.
This is a know issue of SDK:
Changing an iPhone Executable's working directory from “Build Products directory” may cause the application not to install properly with the error message “The Info.plist for application at (null) specifies a CFBundleExecutable of (null), which does not exist.”
as you can see here:
http://developer.apple.com/iphone/library/releasenotes/General/RN-iPhoneSDK-3/index.html
For me, it worked to change the working directory.
I created the problem deleting by hand the build directory.