I'm trying to implement the Cocoa plotting framework (Alpha Release 0.1) in my iPhone app.
I figured I'd first try to run the sample they provide. I attempted to open and compile the project located in /Source/examples/CPTestApp-iPhone/.
It says my base SDK was missing right off of the bat, so I edited the Project settings and the Active Target to use the iOS4 SDK, which I've done before for samples and had work. I'm not sure what to do. I'm running one of the newest Unibody Macbooks, with 10.6.4.
Here is the full error:
// - start - //
Check dependencies
[BEROR]No architectures to compile for (ONLY_ACTIVE_ARCH=YES, active arch=i386, VALID_ARCHS=armv6 armv7).
// - end - //
Thoughts?
I also went to the Build settings for the target(s) that failed and added "i386" to the valid architectures
Try this:
Project Build Settings:
Architectures: Standard (armv6 armv7)
Base SDK: Latest iOS Build Active
Architectures Only: Checked Valid
Architectures: armv6 armv7
Delete any sub settings in the Architecture build setting.
Target Build Settings:
Same at project settings.
Frameworks
Add the SystemConfiguration.framework to your project. - Not sure why this had any impact.
Clean all targets.
Build for the simulator.
The long explanation for this can be found on our blog: http://longweekendmobile.com/2010/06/15/fixing-the-missing-required-architecture-arm-in-file-when-developing-for-ipad/
Adding i386 to the Valid Architectures list worked for me!
For me it was that I had to add i386 to the VALID_ARCHS list. Odd, but it fixed my problem for simulator builds.
See this post.
You have selected as active architecture "active arch=i386 (your Mac)" but the project compiles for " VALID_ARCHS=armv6 armv7 (iPhone Device)", try setting the right arch in the project settings, so it is built for iPhone as it should be.
This project appears to pre-date iOS 4, so you need to open up the .xcodeproj file for the Core Plot library itself, too. It probably also has a broken reference to an old iOS Base SDK and may need the architectures updated.
This happens all the time with old projects migrated to SDK 3.2/4.0. You have to open the target settings and change everything to SDK 4.0 or 3.2. You can still have the target OS be 3.0 if you want that. If it still says "missing SDK" you neglected to change one of those settings to 4.0 or 3.2.
armv6 armv7 , Works for me in valid Architecture .
If you tried all method with "NO SUCCESS"
Try to run project on you device, if it works on device then it will works fine on simulator too.
Related
So I have a brand new app I created last night for iOS6, using XCode 4.5. I can properly develop on my iPhone 4 with iOS6.
Today I got my new iPhone 5 with iOS6 and, after updating the certificates with the new device UUID, I tried to run my app on it and got this error:
XCode cannot run using the selected device. Choose a destination with
a supported architecture in order to run on this device.
I've enabled the device for development. Both armv7 and armv7s are on the settings.
I have included the sources from the Facebook 3.0 SDK and the linker flag '-lsqlite3.0'. I'm guessing the issue has to be related, but cannot figure what is wrong.
Any ideas how to solve it?
PS: The issue happens too when running the app on the simulator. No idea what changed on my project or XCode between last night and today, other than I have a new device and new certificates.
The selected destination does not support the architecture for which the selected software is built. Switch to a destination that supports that architecture in order to run the selected software.
Also you need to select the compiler LLVM in
Project --> Build Settings --> Build Options
I have found the same issue while running an OLD project on XCode 5.0 and My solution is:
You need to do following steps for getting out with this:
1. Set Valid Architectures : armv7,armv7s
2. Set compiler as LLVM in Project ---> Build Settings ---> Build Options.
3. Set Base and Deployment sdk properly.
This is my solution. Happy To Help.
You need to add armv7s to your valid architectures under your Target's Build Settings.
You included src/Framework/Resources/Info.plist when added Facebook SDK files to your project. Just remove it from your project and everything will work again. Guaranteed! :)
I have solve the problem using the below steps.
Close the Xcode
Delete the application from device
Restart the device
then re-run the application
it is working fine..
Make sure the bundle name (in plist file) is same as the project name. I changed it and it worked.
One of my 3rd party libraries couldn't run on armv7s so I removed that option. I also removed armv6 and kept armv7 as the only option. It built and ran on the phone with only armv7.
I have solve the problem using the below steps.
Close the Xcode
Delete the application from device
Restart the device
then re-run the application
it working fine..
I faced this problem because Build settings-> Complier for C/C++/Objective c was set wrong.
So I changed it to default compiler available, it worked!
Just need to select the compiler LLVM in
Targets --> Build Settings --> Build Options
I ran into the same problem. When I check the compiler it is showing incompatible compiler. you need to make it valid one. To set valid compiler follow the steps
select your
project----> build settings-->
on the search bar type compiler and search
now you can find build options under build options you will find compiler for c/c++/objective c set it to valid one.
So basically I created a new project, copied all the sources and everything seems to work fine. At least the app runs.
I am not sure which setting was causing the problem.
I had an issue with an out of data library that was built for iOS 4.x and I was building a new app for iOS 6 with iPhone 5 support. I received this error and the only way I resolved it was to make armv7 the only architecture and valid architecture listed in my project and target build settings.
remove info.plist refrence. And then re-drag info.plist to proj but don't copy to "target"
You just goto Build setting Then valid architecture Replace armv7 armv7s instead of armv7 .Then it will work fine .
Ok, not sure if this is the Problem in Your Project. But what fixed it for me, was to change the Name of the Info.plist File.
I changed the name from Info.plist to my-project-info.plist
also change it under target-build-settings/Packaging/Info.plist
Than delete the App from Devices/Simulators and re-run the App through Xcode
In my Case, everything worked fine since than. In my Case there was nothing wrong with the specifications made in the plist file or with the valid architectures.
some times this happens when your project was build in xcode 4.5 and you are trying to run in xcode 5.0.
so in my case I found the solution.
Change your compiler for C/C++/ObjectiveC Go to Build
Settings->Build OPtions->compiler for C/C++/ObjectiveC; select
Default(Apple LLVM5.0)
I am constantly getting below error while building app:
No architectures to compile for (ARCHS=arm6 arm7, VALID_ARCHS=armv7).
I tried adding arm6 arm7 to architecture but didn't work. I also tried just arm6 and arm7, but still not.
Also, I'm setting deployment target to 4.3 iPhone.
I have Xcode version 4.3.1.
Please help!
You must take two steps:
Go to Project Target > Build Settings > Architectures
Delete whatever you see there, and then add these rows one by one:
armv6
armv7
There are no 'save' buttons there, so what I do, is adding another blank row, pressing enter, removing it, and then clicking out somewhere else, so that I make sure I have both of them added:
Now go to the AppName-Info.plist file, and look for the key "Require device capabilities" and delete it all.
Now it's done.
set "Build Active Architecture Only" = NO
this worked for me after upgrading an old project to xcode5
That works fine for me:
Set architectures to "Standard (armv7,armv7s)" and after set manually Valid architectures to armv7 armv7s
Not arm6 and arm7, try by adding armv6 and armv7 as architectures.
Add architectures only armv7. Remove armv6 then try it.
I am using the latest Xcode and iPhone5. I had it set to armv7s and armv7. It took care of my issue which was the No architectures to compile for (ONLY_ACTIVE_ARCH=YES, active arch=armv7s, VALID_ARCHS=armv6 armv7) error
.
To include 64 bit:
Set architectures to "$(ARCHS_STANDARD_32_64_BIT)" and after set manually Valid architectures to armv7 arm64. My Xcode version was 5.1. Base SDK was iOS 7.1
Deployment target was 6.0.
In another setting configuration:
Set architectures to "$(ARCHS_STANDARD)" and after set manually valid architectures to armv7 arm64. My Xcode version was 6.2. Base SDK was iOS 8.2
Deployment target was 6.0.
I recently upgraded my project from Xcode 4.0.1 to Xcode 4.2 - and everything went pretty smoothly, I did some debugging in the simulator and then I decided to build with device.
My device is a 2nd gen iPod Touch running 4.2.1, so I initially attempted to build to it and got this error:
An unknown error message 'IncorrectArchitecture', was received from the device.
As you do with most error messages, I googled it, and found this question.
After reading the answer, I proceeded to check up on my target architectures, and it turns out I only had armv7 as an architecture to build for. - I added the armv6 architecture, as the answer suggests, but when I built it, I got a load of build warnings/errors such as:
ignoring file /some/path/to/a/staticlibrary.a, file was built for archive which is not the architecture being linked (armv6)
This occurs on all the static libraries in my project, such as the kal library - libkal.a and all the three20 libraries.
Those libraries linked fine in Xcode 4.0.2 - and it also built fine to my iPod - so why will the armv7 architecture not build AND the libraries not link for armv6 in Xcode 4.2? - I'm really confused - any suggestions would be greatly appreciated.
Add ARMV6 to your build settings like this:
Select your build settings
Scroll to Architectures
Doubletap on the existing entry
Tap on +
Enter armv6
Tap on Done
You will need to do this for all projects that are linked with your app (e.g. three20).
I just recently downloaded the Xcode 4.2 with iOS 5 SDK package and I immediately noticed that I am unable to use my iPhone 3Gs with iOS 4.2.1 for debugging. I am only able to debug and test on my iphone 4 with iOS 5 installed.
For any of my devices running any iOS less than 5.0 Xcode just says "Finished running for iPhone3GS" and doesn't run it. I have my deployment target set to 3.0 because I am not using any features in my app above 3.0 and I want to be able to target all versions 3.0 or higher. I have all my provisioning profiles installed and up to date.
I have quit and restarted xcode, I have cleaned the build multiple times. I have tried adding armv6 in the archtecture build settings, but nothing will allow me to build and run my app on my old phone with ios 4.2.1.
My question is, is it possible to still make apps with the new SDK work for iOS versions lower than 5? How can I be sure that my app will still run on lower iOS versions if I am unable to install them on my old phone?
Edit:
OK it looks like iOS SDK 5 dropped support for armv6 by default. What you have to do is add armv6 in the Architectures field under Build Settings for both your Target and your Project. Then your app will be able to run on iPhone 3G devices.
Answer can be found here
How to build for armv6 and armv7 architectures with iOS 5
I was having the same issue trying to get a newly created Xcode 4.2 project running on an iPhone 3G 4.2.1. Here is how I was able to get it to run.
1) Change the Target's "Build Settings" ==> "Architecture" from "Standard (armv7)" to "other". Add armv6 and armv7.
2) Change the Target's "Build Settings" ==> "Valid Architecture" to armv6 and armv7.
3) Change the Target's "Build Settings" ==> "iOS Deployment Target" to iOS 4.2.
4) Open the projects *-Info.plist, remove the setting "Required device capabilities" (note it required armv7)
btw I figured this out when I tried to manually add the app via the organizer and it reported:
Can't install application
The Info.plist for application at /Users/.../TestsDebug.app specifies
device capability requirements, which are not met by Dev iPhone 3G
All should work after that. Talk about a PITA.
Go to Xcode > Preferences > Downloads and install debugging support for older iOS versions.
mmorris got me close to resolving the issue...
In the Info.plist, I had to set the Required Device Capabilities to armv6, not armv7
Hope this helps others out as well.
You need to connect the phone and then go to the organizer. Xcode should automatically request the older version.
See the developer page for more info. It was described in the notes for the 4.2 beta
I encountered a similar problem trying to run my app on an old iPod Touch. I upgraded to Xcode 4.3.3 and the app would no longer run in the debugger for me on older hardware.
I believe the other comments here about "Architectures" and "Required device capabilities" are important details to specify correctly. Unfortunately, they weren't enough to fix my problem.
In my case, I found the build scheme to be the culprit. Xcode 4.3.3 prompted me to switch from the GDB debugger to LLDB when it upgraded my project. When I changed the Run action of my scheme back to GDB, I was able to run the app again on my old hardware from Xcode.
I found out that I had to add armv6 to architectures, but still did not work. And now I have removed armv7 from required capabilities, and that was it! It worked!
This worked for me and should work for you if you had an older version of Xcode previously. If not then you should follow the advice given by others to obtain the SDK from an older version of SDK:
sudo cp -a /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk
This command is only a little bit different from that shown by others, but those commands dropped the files in the SDKs folder itself for me - we want a subdirectory of it to be created with the appropriate name.
In my case there was a redundant line
in Required device capabilities
I just removed it...
Hopefully it will help someone else.
I'm getting the following error when including static libraries:
missing required architecture i386 in
file
This worked 30 seconds previously, and only failed when I upgraded to Xcode 3.2.3. I've used "file" command to check - and, yes, XCode is building completely the wrong architecture (armv6 + armv7 instead of i386).
This seems to be a major bug in latest Xcode, where Apple has re-written the build / compile / link settings. There's a note in the release notes saying very vaguely that they've "Changed it" because it used to be "confusing". This is not helpful.
The build settings for the library VERY clearly say:
"Valid architectures: i386"
There's no confusion here - Xcode is building something other than what the target says it should.
The question is: how do you un-break this? How do you force Xcode to do what it's supposed to? I've re-installed Xcode from scratch, cleaned everything, and manually inspected the build files. There's nothing wrong (and, of course, it worked perfectly in xcode 3.2.2)
After considerable research, I believe the answer is:
"this is now impossible - Apple has deliberately hard-coded XCode to ignore build settings"
However, I've come up with a script that automatically builds ALL platforms of a project (which you HAVE to do with static libraries - you don't have much choice now, because Apple has disabled Targets), and the script could easily be modified to do all targets, instead of all platforms:
Build fat static library (device + simulator) using Xcode and SDK 4+
Right click on your Target app under Targets and make sure that the Base SDK is set to iOS.