my problem is quite simple: there is a folder in my project which I want versioned, but not pushed along with the rest of the project when I push updates. The situation is that I made an Android app stub along with the project, and I don't want to push it until it is actually somewhat functioning. It's a pretty bulky folder.
I do not want to make a separate branch for that folder, because of two problems: firstly, updating that branch whenever I pull from remote will require a merge; secondly, swapping between the two branches requires noticeable waiting time as the thousands of Android files are created/deleted, and this is very annoying to me.
I was thinking about editing .hgignore in some way, but I think it is wrong that the remote repo will then have my local folder as ignored.
Any suggestions?
You can add this snippet to your repo's hgrc file:
[ui]
ignore = /path/to/.hg/hgignore
where the point about this hgignore file is that it is non-versioned and local to you. The contents hgignore can be anything that would also be suitable for the (versioned) .hgignore. e.g:
syntax: glob
/directory/to/ignore
The name of the file, hgignore, can be called anything, but it's what I use.
You can use the configuration [defaults] section to add some "--exclude" options to usual commands (see my answer to Mercurial hg ignore does not work properly ) for more details. You can even specify which files you do not want to commit in your directory, e.g., stub/**.c for all C files in the hierarchy of directories below stub.
But.. be careful that it is dangerous to silently ignore modifications to files and also that this [defaults] section has been marked as deprecated (it is still present in 2.9.2).
If this is a temporary situation, it would solve your problem though: you would just have to remove the --exclude parts when you feel ready to commit and push your stub.
In our company, we just started using Mercurial and we are facing the following problem:
We have some files in the remote repository that are changed by each developer to add some local configuration but these files must never be changed in the remote repository.
Is there a way to tell Mercurial to stop tracking those files locally without making any change to the file on the remote repository?
We tried with hg forget <file> but as I understand, this will remove the file from the remote repository.
We also tried adding those files to .hgignore file, but somehow the files are not really being ignored, I guess Mercurial does this because the files are already being tracked.
So far, we are just ignoring the files when we perform a commit and we use shelve to maintain and restore our local changes after an Update, but it's starting to be a really tedious task.
Thanks in advance for any help.
EDIT: Although it didn't completely fix what we wanted to, accepted answer is the best approach. Our problem is probably a result of a bad design.
If the file you want unchanged is, for example, config.cfg, check in a config_template.cfg, forget config.cfg if it is already tracked, and add config.cfg to the ignore list. Then, a build rule can create config.cfg from the template if it does not already exist.
A user will then have a starting config.cfg that they can customize without checking it in.
You could use the configuration [defaults] section to add some "--exclude" options to usual commands (see my answer to Mercurial hg ignore does not work properly ) for more details.
But.. be careful that it is dangerous to silently ignore modifications to files and also that this [defaults] section has been marked as deprecated (it is still present in 2.9.2).
IMHO it's a wrong approach to have a file in the repository which every person needs changed anyway - it's an indication that you do not want to have it tracked at all.
Change the file to config.sample, and have your programme create a default config upon first start (thus when there's no existing config file) and have every developer use the config file as s/he needs.
And I see Mark Tolnen's answer only now :)
I am working with eclipse subversion plugin, and made some local changes to crucial files, which I don't wan't to check in. I'm looking for a way to "lock" (I know that the lock term means something else in svn...) these local files and disable checking them in, so that I won't accidentally check them in.
Maybe you can just ignore them:
Team --> add to svn:ignore
if necessary you can do this via the svn command line. This way you might add a pattern to svn ignore
svn pe svn:ignore .
then you can fill in something like:
*.d
NOTE that svn:ignore is different for each subfolder (hence the "." in the svn command)
The answer largely depends on if the file is already being tracked (versioned) by Subversion or not.
Not Versioned
Setting up an ignore via one of the several methods we have of ignoring files will do what you want. If you're using 1.8 we also have svn:global-ignores which supports inheritance (so if you want to say ignore all files with the .o extension you could just set a svn:global-ignores with *.o as a pattern.)
Versioned
If the file is already in the repository and is versioned then ignore won't help you since versioned files are not ignored by any configuration you do. One alternative, as mentioned in the answer to this question "How do I avoid checking in local changes to the SVN repository?", is to use a changelist and add the file to the changelist.
A better option might be to restructure your setup to not require making local changes to versioned files. A common pattern you will see is configuration files where the committed file is a template, developers then copy the template into another name that is used and customize it.
I thought I'd get myself a Subversion setup at home for my hobby projects, and I'm trying to do it right, first time (my work's source control control policies or lack of them are, well, not perfect).
The thing I'm struggling with is this: I'd like to version entire Eclipse projects. This will be good from Eclipse's point of view - I'll just let it do its thing, and should just mean I need to ignore a few binaries / whole build directories and set up these ignores just once when I set up the project (right?). Anyway, I've tried it a couple of times and svn seems to get confused and ignore my ignore settings. What should be the correct procedure?
Thanks.
PS I'm doing the svn bits from command line, trying to avoid a GUI till I'm happy with it.
There are basically two ways to instruct subversion to ignore files either by name or by pattern.
The first way is to find the configuration file (location depends on platform) and add the file name or pattern to the global-ignores list. This applies to all svn operations on the machine or for that user.
The second way is to set the svn:ignore property on a versioned directory, for example:
svn propedit svn:ignore myDirectory
This brings up an editor for the svn:ignore property where you can add for example:
bin
obj
*.bak
Note that this property change is also versioned and needs to be committed, after that they apply for everyone working on that directory (after an update of course). This property doesn't apply recursively to subdirectories.
For more info see the svn book.
IIRC, Subversion won't stop you from svn adding files that you marked as ignored if you explicitly add them by name (though it may warn you). The svn:ignore property is primarily there to prevent them from showing up in svn status.
Also, AFAIK, the svn:ignore property is not recursive, so it will only work on first-level children of the directory it is set on.
If you on a linux box, you can try these steps, if on windows, pretty the installer shall do things for you.
https://help.ubuntu.com/community/Subversion
Also the subversion book might help
http://svnbook.red-bean.com/en/1.5/index.html
Could you be a bit more clear about what specifically svn is getting confused about? Remember that the svn:ignore property is a per-directory setting; i.e. if you want to ignore .foo files in ./bar and in ./bar/abc, you need to edit the property for each directory. Yes, it is a pain in the butt.
There are a couple of ways I've added projects to source control. Here's a higher level description:
One way is to import an empty top-level folder, then svn checkout, then copy the project files to that working copy, then svn add all but the files to be ignored (or svn revert specific files/folders) and set ignore properties as desired, then commit.
Another way is to make a copy of the project files, manually delete files and folders to be ignored, then svn import. Then delete those files. Then do an svn checkout, then setup the ignore properties on that working copy and svn commit. Then copy the original ignored files/folders to the working copy.
Of course, the more things that are globally ignored the easier these steps will be.
So I get that most of you are frowning at me for not currently using any source control. I want to, I really do, now that I've spent some time reading the questions / answers here. I am a hobby programmer and really don't do much more than tinker, but I've been bitten a couple of times now not having the 'time machine' handy...
I still have to decide which product I'll go with, but that's not relevant to this question.
I'm really struggling with the flow of files under source control, so much so I'm not even sure how to pose the question sensibly.
Currently I have a directory hierarchy where all my PHP files live in a Linux Environment. I edit them there and can hit refresh on my browser to see what happens.
As I understand it, my files now live in a different place. When I want to edit, I check it out and edit away. But what is my substitute for F5? How do I test it? Do I have to check it back in, then hit F5? I admit to a good bit of trial and error in my work. I suspect I'm going to get tired of checking in and out real quick for the frequent small changes I tend to make. I have to be missing something, right?
Can anyone step me through where everything lives and how I test along the way, while keeping true to the goal of having a 'time machine' handy?
Eric Sink has a great series of posts on source control basics. His company (Sourcegear) makes a source control tool called Vault, but the how-to is generally pretty system agnostic.
Don't edit your code on production.
Create a development environment, with the appropriate services (apache w/mod_php).
The application directory within your dev environment is where you do your work.
Put your current production app in there.
Commit this directory to the source control tool. (now you have populated source control with your application)
Make changes in your new development environment, hitting F5 when you want to see/test what you've changed.
Merge/Commit your changes to source control.
Actually, your files, while stored in a source repository (big word for another place on your hard drive, or a hard drive somewhere else), can also exist on your local machine, too, just where they exist now.
So, all files that aren't checked out would be marked as "read only", if you are using VSS (not sure about SVN, CVS, etc). So, you could still run your website by hitting "F5" and it will reload the files where they currently are. If you check one out and are editing it, it becomes NOT read only, and you can change it.
Regardless, the web server that you are running will load readonly/writable files with the same effect.
You still have all the files on your hard drive, ready for F5!
The difference is that you can "checkpoint" your files into the repository. Your daily life doesn't have to change at all.
You can do a "checkout" to the same directory where you currently work so that doesn't have to change. Basically your working directory doesn't need to change.
This is a wildly open ended question because how you use a SCM depends heavily on which SCM you choose. A distributed SCM like git works very differently from a centralized one like Subversion.
svn is way easier to digest for the "new user", but git can be a little more powerful and improve your workflow. Subversion also has really great docs and tool support (like trac), and an online book that you should read:
http://svnbook.red-bean.com/
It will cover the basics of source control management which will help you in some way no matter which SCM you ultimately choose, so I recommend skimming the first few chapters.
edit: Let me point out why people are frowning on you, by the way: SCM is more than simply a "backup of your code". Having "timemachine" is nothing like an SCM. With an SCM you can go back in your change history and see what you actually changed and when which is something you'll never get with blobs of code. I'm sure you've asked yourself on more than one occasion: "how did this code get here?" or "I thought I fixed that bug"-- if you did, thats why you need SCM.
You don't "have" to change your workflow in a drastic way. You could, and in some cases you should, but that's not something version control dictates.
You just use the files as you would normally. Only under version control, once you reach a certain state of "finished" or at least "working" (solved an issue in your issue tracker, finished a certain method, tweaked something, etc), you check it in.
If you have more than one developer working on your codebase, be sure to update regularly, so you're always working against a recent (merged) version of the code.
Here is the general workflow that you'd use with a non-centralized source control system like CVS or Subversion: At first you import your current project into the so-called repository, a versioned storage of all your files. Take care only to import hand-generated files (source, data files, makefiles, project files). Generated files (object files, executables, generated documentation) should not be put into the repository.
Then you have to check out your working copy. As the name implies, this is where you will do all your local edits, where you will compile and where you will point your test server at. It's basically the replacement to where you worked at before. You only need to do these steps once per project (although you could check out multiple working copies, of course.)
This is the basic work cycle: At first you check out all changes made in the repository into your local working copy. When working in a team, this would bring in any changes other team members made since your last check out. Then you do your work. When you've finished with a set of work, you should check out the current version again and resolve possible conflicts due to changes by other team members. (In a disciplined team, this is usually not a problem.) Test, and when everything works as expected you commit (check in) your changes. Then you can continue working, and once you've finished again, check out, resolve conflicts, and check in again. Please note that you should only commit changes that were tested and work. How often you check in is a matter of taste, but a general rule says that you should commit your changes at least once at the end of your day. Personally, I commit my changes much more often than that, basically whenever I made a set of related changes that pass all tests.
Great question. With source control you can still do your "F5" refresh process. But after each edit (or a few minor edits) you want to check your code in so you have a copy backed up.
Depending on the source control system, you don't have to explicitly check out the file each time. Just editing the file will check it out. I've written a visual guide to source control that many people have found useful when grokking the basics.
I would recommend a distributed version control system (mercurial, git, bazaar, darcs) rather than a centralized version control system (cvs, svn). They're much easier to setup and work with.
Try mercurial (which is the VCS that I used to understand how version control works) and then if you like you can even move to git.
There's a really nice introductory tutorial on Mercurial's homepage: Understanding Mercurial. That will introduce you to the basic concepts on VCS and how things work. It's really great. After that I suggest you move on to the Mercurial tutorials: Mercurial tutorial page, which will teach you how to actually use Mercurial. Finally, you have a free ebook that is a really great reference on how to use Mercurial: Distributed Revision Control with Mercurial
If you're feeling more adventurous and want to start off with Git straight away, then this free ebook is a great place to start: Git Magic (Very easy read)
In the end, no matter what VCS tool you choose, what you'll end up doing is the following:
Have a repository that you don't manually edit, it only for the VCS
Have a working directory, where you make your changes as usual.
Change what you like, press F5 as many times as you wish. When you like what you've done and think you would like to save the project the way it is at that very moment (much like you would do when you're, for example, writing something in Word) you can then commit your changes to the repository.
If you ever need to go back to a certain state in your project you now have the power to do so.
And that's pretty much it.
If you are using Subversion, you check out your files once . Then, whenever you have made big changes (or are going to lunch or whatever), you commit them to the server. That way you can keep your old work flow by pressing F5, but every time you commit you save a copy of all the files in their current state in your SVN-repository.
Depends on the source control system you use. For example, for subversion and cvs your files can reside in a remote location, but you always check out your own copy of them locally. This local copy (often referred to as the working copy) are just regular files on the filesystem with some meta-data to let you upload your changes back to the server.
If you are using Subversion here's a good tutorial.
Depending on the source control system, 'checkout' may mean different things. In the SVN world, it just means retrieving (could be an update, could be a new file) the latest copy from the repository. In the source-safe world, that generally means updating the existing file and locking it. The text below uses the SVN meaning:
Using PHP, what you want to do is checkout your entire project/site to a working folder on a test apache site. You should have the repository set up so this can happen with a single checkout, including any necessary sub folders. You checkout your project to set this up one time.
Now you can make your changes and hit F5 to refresh as normal. When you're happy with a set of changes to support a particular fix or feature, you can commit in as a unit (with appropriate comments, of course). This puts the latest version in the repository.
Checking out/committing one file at a time would be a hassle.
A source control system is generally a storage place for your files and their history and usually separate from the files you're currently working on. It depends a bit on the type of version control system but suppose you're using something CVS-like (like subversion), then all your files will live in two (or more) places. You have the files in your local directory, the so called "working copy" and one in the repository, which can be located in another local folder, or on another machine, usually accessed over the network. Usually, after the first import of your files into the repository you check them out under a working folder where you continue working on them. I assume that would be the folder where your PHP files now live.
Now what happens when you've checked out a copy and you made some non-trivial changes that you want to "save"? You simply commit those changes in your working copy to the version control system. Now you have a history of your changes. Should you at any point wish to go back to the version at which you committed those changes, then you can simply revert your working copy to an older revision (the name given to the set of changes that you commit at once).
Note that this is all very CVS/SVN-specific, as GIT would work slightly different. I'd recommend starting with subversion and reading the first few chapters of the very excellent SVN Book to get you started.
This is all very subjective depending on the the source control solution that you decide to use. One that you will definitely want to look into is Subversion.
You mentioned that you're doing PHP, but are you doing it in a Linux environment or Windows? It's not really important, but what I typically did when I worked in a PHP environment was to have a production branch and a development branch. This allowed me to configure a cron job (a scheduled task in Windows) for automatically pulling from the production-ready branch for the production server, while pulling from the development branch for my dev server.
Once you decide on a tool, you should really spend some time learning how it works. The concepts of checking in and checking out don't apply to all source control solutions, for example. Either way, I'd highly recommend that you pick one that permits branching. This article goes over a great (in my opinion) source control model to follow in a production environment.
Of course, I state all this having not "tinkered" in years. I've been doing professional development for some time and my techniques might be overkill for somebody in your position. Not to say that there's anything wrong with that, however.
I just want to add that the system that I think was easiest to set up and work with was Mercurial. If you work alone and not in a team you just initialize it in your normal work folder and then go on from there. The normal flow is to edit any file using your favourite editor and then to a checkin (commit).
I havn't tried GIT but I assume it is very similar. Monotone was a little bit harder to get started with. These are all distributed source control systems.
It sounds like you're asking about how to use source control to manage releases.
Here's some general guidance that's not specific to websites:
Use a local copy for developing changes
Compile (if applicable) and test your changes before checking in
Run automated builds and tests as often as possible (at least daily)
Version your daily builds (have some way of specifying the exact bits of code corresponding to a particular build and test run)
If possible, use separate branches for major releases (or have a development and a release branch)
When necessary, stabilize your code base (define a set of tests such that passing all of those tests means you are confident enough in the quality of your product to release it, then drive toward 0 test failures, i.e. ban any checkins to the release branch other than fixes for the outstanding issues)
When you have a build which has the features you want and has passed all of the necessary tests, deploy it.
If you have a small team, a stable product, a fast build, and efficient, high-quality tests then this entire process might be 100% automated and could take place in minutes.
I recommend Subversion. Setting up a repository and using it is actually fairly trivial, even from the command line. Here's how it would go:
if you haven't setup your repo (repository)
1) Make sure you've got Subversion installed on your server
$ which svn
/usr/bin/svn
which is a tool that tells you the path to another tool. if it returns nothing that tool is not installed on your system
1b) If not, get it
$ apt-get install subversion
apt-get is a tool that installs other tools onto your system
If that's not the right name for subversion in apt, try this
$ apt-cache search subversion
or this
$ apt-cache search svn
Find the right package name and install it using apt-get install packagename
2) Create a new repository on your server
$ cd /path/to/directory/of/repositories
$ svnadmin create my_repository
svnadmin create reponame creates a new repository in the present working directory (pwd) with the name reponame
You are officially done creating your repository
if you have an existing repo, or have finished setting it up
1) Make sure you've got Subversion installed on your local machine per the instructions above
2) Check out the repository to your local machine
$ cd /repos/on/your/local/machine
$ svn co svn+ssh://www.myserver.com/path/to/directory/of/repositories/my_repository
svn co is the command you use to check out a repository
3) Create your initial directory structure (optional)
$ cd /repos/on/your/local/machine
$ cd my_repository
$ svn mkdir branches
$ svn mkdir tags
$ svn mkdir trunk
$ svn commit -m "Initial structure"
svn mkdir runs a regular mkdir and creates a directory in the present working directory with the name you supply after typing svn mkdir and then adds it to the repository.
svn commit -m "" sends your changes to the repository and updates it. Whatever you place in the quotes after -m is the comment for this commit (make it count!).
The "working copy" of your code would go in the trunk directory. branches is used for working on individual projects outside of trunk; each directory in branches is a copy of trunk for a different sub project. tags is used more releases. I suggest just focusing on trunk for a while and getting used to Subversion.
working with your repo
1) Add code to your repository
$ cd /repos/on/your/local/machine
$ svn add my_new_file.ext
$ svn add some/new/directory
$ svn add some/directory/*
$ svn add some/directory/*.ext
The second to last line adds every file in that directory. The last line adds every file with the extension .ext.
2) Check the status of your repository
$ cd /repos/on/your/local/machine
$ svn status
That will tell you if there are any new files, and updated files, and files with conflicts (differences between your local version and the version on the server), etc.
3) Update your local copy of your repository
$ cd /repos/on/your/local/machine
$ svn up
Updating pulls any new changes from the server you don't already have
svn up does care what directory you're in. If you want to update your entire repository, makre sure you're in the root directory of the repository (above trunk)
That's all you really need to know to get started. For more information I recommend you check out the Subversion Book.