I'd like to be able to set multiple marks in Emacs like Vim does. In Vim you might press m b and that would set a mark at that line in the file. Later pressing ' b will move your cursor back to that line. You can make multiple marks with m{a-zA-Z}. Is there a way to have multiple marks like this in Emacs?
From Emacs documentation :
C-x r SPC r
Record the position of point and the current buffer in register r (point-to-register).
C-x r j r
Jump to the position and buffer saved in register r (jump-to-register).
But if you want your positions to persist automatically from one Emacs session to the next, you should use Bookmarks :
C-x r m RET
Set the bookmark for the visited file, at point.
C-x r m bookmark RET
Set the bookmark named bookmark at point (bookmark-set).
C-x r b bookmark RET
Jump to the bookmark named bookmark (bookmark-jump).
C-x r l
List all bookmarks (list-bookmarks).
M-x bookmark-save
Save all the current bookmark values in the default bookmark file.
You can use what Emacs calls registers. The documentation explains them better than I can.
Try the mark ring for quick marks:
C-spaceMake a mark at current position; also, add position to mark ring.
C-xC-xJump back to previous mark.
C-UC-spaceCycle through marks in the mark ring.
I used Vim for a decade before switching to Emacs a few years ago, and while the registers and bookmarks looked good at first, the mark ring is what I actually end up using 90% of the time. Usually I just use the C-space, C-x C-x, but cycling works, too.
Btw, realize that doing large non-arrow key movements like M-v will often add a mark to the mark ring. Just practice these key combos and you'll likely find them sufficient for most tasks.
Radix already did a good job explaining the registers and bookmarks, and those are useful for locations in files that will be referred to often or need annotation.
Vanilla Emacs makes you specify a name for each bookmark. What you want, it sounds like, is a quick way to create bookmarks without naming them -- just hit a key. You want autonamed bookmarks, available with Bookmark+. You can even have them be automatically highlighted, if you like (the fringe or the line).
Have a look at this: http://www.cs.utah.edu/dept/old/texinfo/emacs18/emacs_13.html
Related
I would like to accomplish the following behaviour in Emacs and was wondering if there's an existing package that already does what I want.
I want my buffer to display only lines 30 to 60 in file myfile.txt, and simply hide the rest of the file from me.
When I scroll up to the top, I should be at line 30.
When I scroll down to the bottom, I should be at line 60.
If I edit this region, these edits should be reflected in the original file.
The region should grow/shrink as I insert/delete lines.
I should be able to open multiple regions to the same file in different buffers.
This is very close to my ideal workflow. Thanks very much for your help!
The Narrowing,you can Narrow down to between point and mark with C-x n n,then what you edit will be restricted in this region,after that you just Widen to make the entire buffer accessible again C-x n w.Perhaps this is what you are looking for
Try library Narrow Indirect (narrow-indirect.el)
It provides simple commands to create an indirect buffer that is a clone of the current buffer and that is narrowed to a particular portion of it. By default, it helps you distinguish such indirect buffers from non-indirect buffers, by using a buffer-name prefix (default I-) and by using a different face for the buffer name in the mode line.
To complement the other answers, if you are working on an org file specifically, you also have the following commands :
C-x n s (org-narrow-to-subtree) : Narrow buffer to current subtree.
C-x n w (widen) : Widen buffer to remove narrowing.
And if you are using blocks (‘#+BEGIN’ … ‘#+END) :
C-x n b (org-narrow-to-block) : Narrow buffer to current block.
Using the 'multiple-cursor' emacs package,
when I mark a word and cut ('C-w') in different multiple cursors, the only word in the 'active' cursor I control is cut.
I want to select different words in multiple positions and yank it to other relative position.
When I first tried this I remember some yes or no option at the screen bottom, but I couldn't really notice this at first and some keystroke made it to "no". I guess this might have been an option for multiple-cut. But I don't know how to revert this choice.
How do you do multiple cut and yank in emacs?
This works by default, so at some point you have indeed asked the library not do do this.
These settings are stored (by default) in ~/.emacs.d/.mc-lists.el
Just edit that file appropriately, and then M-x eval-buffer RET to make those same changes in the running instance.
assume I have focus on BrokerSyncMasteredRecord.cc. I want to fast copy BrokerSyncMasteredRecord.cc to the left by one stroke(like some hotkeys). the final state in pic 2. Currently, I can only use C-x b and type in a few chars of the buffer name. this is very slow.
NOTE: this should not be another opened replica buffer(e.g., BrokerSyncMasteredRecord.cc[replicated], you know what i mean if you are a emacs user) but exact the same buffer, just show in two different windows
I'll just quote the Emacs tutorial (f1 t) for you:
* MULTIPLE WINDOWS
------------------
One of the nice features of Emacs is that you can display more than
one window on the screen at the same time. (Note that Emacs uses the
term "frames"--described in the next section--for what some other
applications call "windows". The Emacs manual contains a Glossary of
Emacs terms.)
>> Move the cursor to this line and type C-l C-l.
>> Now type C-x 2 which splits the screen into two windows.
Both windows display this tutorial. The editing cursor stays in
the top window.
This basic tutorial is just 1000 lines, almost small enough to use as a capcha
for asking questions about Emacs:)
I've been using emacs for all of my text editing needs for the past three years now. When I'm in a single file, working on code or whatnot, I'm fairly efficient. With two files, I can "C-x b RET" between them and I do fine. However, whenever I need to be working on more than two files at a time, I tend to get lost.
Here are some of the problems that I'd like to work on:
I forget what some of my buffers are called, but I don't understand why C-x C-b splits my window into two buffers and exits the mini buffer. Sure I can switch buffers and choose a buffer to visit, but this feels unintuitive, and leaves me with two buffers open.
When I visit a directory rather than a file, I have a convenient list of all of the files and directories. I usually want to do one of two things with this: 1) Open a single file and never see this buffer again OR 2) Open a bunch of files and never see this buffer again. I don't really know how to do this, as moving the point to a file and hitting return doesn't do either of these things.
I know that my buffers aren't like tabs, but I have an inclination to want to scroll through them to find what I want. I don't know of any key-bindings for this, but I'd like it to be M-n / M-p or the like. Then again, this may be a horribly inefficient way to switch buffers.
When I open interactive help of any kind (for example in ESS), I have a habit of switching back to the buffer I was working in and using C-x 1 to get back to a single buffer. When I do this, however, the help buffer hangs around in my buffer list, further confusing me. I know I can switch to that buffer, kill it, switch back, and then go back to a single buffer, but this seems wrong.
The way I've dealt with this so far involves using a tiling window manager and a few emacs windows in different work-spaces, rather than actually learn the best way to manage a number of files in emacs. I don't necessarily want to change emacs to better fit my needs (although I am open to that if it fits in with what I'm about to say), instead, I'd like to grok the thought process behind handling files/buffers the way that emacs does, and how I can be more efficient with it.
Any answer that would help me understand the correct way, or a more efficient way to manage my buffers or files would be greatly appreciated.
Bind C-x C-b to ibuffer. This is a better buffer listing facility with many advanced features, and its default behaviour is to replace the current buffer with the buffer listing, and then bury the listing when you select a buffer (leaving you with the newly-selected buffer in place of the original one).
You can simply use C-x b to enter your selection in the mini-buffer, of course; however the tab-completion (which is needed to make this a viable option, IMO) does open a new window temporarily, at which point I think you might as well familiarise yourself with something with more features.
Use a instead of RET when selecting from dired. This kills the dired buffer instead of leaving it behind. C-h m in any buffer will show you the help for its major mode (followed by help for the minor modes), and you can read about all the available dired key bindings there.
http://www.emacswiki.org/cgi-bin/wiki/TabBarMode ? (edit: I prefer Rémi's answer for this one, but TabBarMode would give you the visual tab element if you were particularly keen on that.)
q is bound to a 'quit' function in a great many major modes. Generally it buries the buffer rather than killing it, but I certainly find that fine.
To elaborate a little on #1, ibuffer has lots of nice features, and M-x customize-group ibuffer RET will give you some idea of how you can customise it to your liking.
Furthermore, you can filter the buffer list by many criteria (again, use C-h m to see its help page), and then generate a 'group' definition from the current filters, and save your custom filters and groups for future usage.
For example:
/ f ^/var/www/ RET: filter buffer list to show only filenames starting with /var/www/.
/ s Web filters RET: name and save active filter set to your init file.
/ g Web development RET: create a named group from the active filters.
/ S My groups RET: name and save group definitions to your init file.
/ r Web filters RET: invoke the "Web filters" filters.
/ R My groups RET: invoke the "My groups" groups.
RET on a group name to collapse or expand it.
C-k and C-y to kill and yank groups, to re-arrange them.
C-h m for more information...
This way you can have a single Emacs instance running, and create filters and groups for different types of task, and easily switch between them.
I think you will really enjoy Ido for dealing with multiple buffers who's names you can't exactly remember. When you type C-x b it shows a list of open buffers in most used order. As you type some of the characters in a buffer name the list is filtered. The characters you type don't have to be at the begging of the name or contiguous. Using C-f, C-b or left/right arrow keys cycles through the buffer choices.
Also see Smex for Ido like functionality for M-x
Closing windows is done with C-x 0. Intentionally splitting the window is done with C-x 2 for horizontal, C-x 3 for vertical. I love this feature, since it allows me to have test and production code visible at the same time. C-x o takes me to the other window.
I use C-x right (or C-x C-right) and C-x left (or C-x C-right) to go to the next and previous buffer. I don't mind anymore off the few buffer that lay around in Emacs but you could use k in the buffer list to kill the buffer you don't use anymore.
You can also try Iswitchb mode which provides auto-completion for buffer names when you switch buffers via C-x b.
To activate:
M-x iswitchb-mode
Or add to your .emacs file:
(iswitchb-mode)
It is similar to Ido mode for buffer switching but a bit more lightweight.
Also, if you want a more customizable listing of your buffers then use M-x bs-show as an alternative to C-x C-b. In that buffer type ? to get a list of actions you can perform.
I think the number one most useful extension for flipping through buffers is Anything. It lets you start typing part of a buffer (or file!) name and it will figure out what you want. I've rebound C-x b to anything-for-buffers. It makes life so much better.
As always, there are many ways to help you with this; it depends a bit on personal preference what works best, here are some links with explanations:
ibuffer; which is an updated buffer menu (C-x C-b)
ido, which let's you have more powerful autocompletion to switch through buffers. It's a kind-of 'better iswitchb'.
These two are enough for me; but you may also be interested in the tabbar-mode, which gives you rudimentary tabs (like firefox has them).
I want to select or highlight a block in Emacs without using the mouse, but doing it from the keyboard like Vim's visual mode. What is the easiest way to do this from a keyboard?
If I understand the question correctly, it is not about rectangular regions originally.
C-Spc puts a mark at the current position.
Wherever your cursor is afterwards, the text between the last mark and the current position is "selected" (you can highlight this by activating transient-mark-mode, but this will also mean that marks have to be deleted when you don't want highlight).
You can operate on that region with commands like:
C-w . . Kill region. This deletes and puts the region into the kill ring.
C-y . . Yank. This inserts the last snippet from the kill ring.
M-y . . Cycle kill ring. Immediately after C-y, this replaces the yanked part by the other snippets in the kill ring.
M-w . . Save region into kill ring. Like C-w, but doesn't delete.
This is just the basic usage. Marks have other uses, too. I recommend the tutorial (C-h t).
Take a look at region-rectangle in Emacs.
In short, you start selection like usual with Control-Space, then kill region with Control-x r k and paste (or yank) killed block with Control-x r y.
Emacs 24.4 now has rectangle-mark-mode. Use Ctrl + X, Space to invoke it.
Although C-SPC is a common way to start marking something from
wherever your point is, there are often quicker/easier ways that don't
involve explicitly moving to start/end points...
Built-in selection shortcuts
M-h — an important means to mark a paragraph. A "paragraph"
often means a block of code.
C-M-h and C-M-# — for marking sexps and defuns,
respectively. This works for several languages, not just lisps.
hold down shift — another slick way to highlight during
movement. E.g., M-S-f selects forward a whole word. This is
shift-select-mode,
and it is enabled by default in Emacs 24+. On some (non-chiclet)
keyboards, you should be able to hold down C-S- with a single
pinky.
You can press any of these repeatedly to grow the selection.
There are also a few special ways to mark things:
C-x h — mark the whole buffer
C-x SPC — enter rectangle mark mode
(NOTE: use C-g often to cancel marking while
experimenting.)
Add-ons
There are a few add-on packages that improve selecting regions and
things. These are all play nicely together and fit different use
cases. Use them all!
expand-region:
Expand region increases the selected region by semantic units. Just
keep pressing the key until it selects what you want. C-= is a
recommended binding for it. Hit it a few times to get what you
need.
easy-kill: Use M-w and
a mnemonic to select different types of things, like words, sexps,
lists, etc.
zop-to-char:
Like zap-to-char, but provides nice selection and other
menu-driven actions.
diff-hl: Highlight uncommitted changed regions. Use diff-hl-mark-hunk to select/mark a hunk.
symbol-overlay: Select symbol at point with a keystroke (M-i). Then you can do other things with it, like copy, search, jump, replace, etc.
Use Control-Space to set a mark and move your cursor.
The transient-mark-mode will highlight selections for you. M-x transient-mark-mode.
You can setup Emacs to enable this mode by default using a customization. M-x customize-option RET transient-mark-mode.
... and in case you are using Ubuntu and Ctrl + space is not working for you: you need to clear the Intelligent Input Bus (IBus) "next input method" key binding, as in
run ibus-setup and change the key binding for
"next input method" to something else (or delete it entirely by
clicking the "..." button and then the "Delete" button).
The quote is taken from an answer to a Stack Overflow question.
To expand answer of Edin Salkovic, if you use CUA mode, you can use Ctrl + Enter to begin a visual block selection. There are plenty of shortcuts to control block selection described in the documentation of CUA.
With Emacs 25, simply press Ctrl + Space and then move your cursor wherever you want to highlight/select the region of text which interests you. After that, you may need these commands:
Ctrl + W for cutting.
Alt + W for copying.
Ctrl + Y for pasting.