I have created a music application in iphone .
The App crashes if i keep on switching between the tabs while the song is playing.
How can i solve this problem .Please anybody help me regarding this problem
Generally such kind of issues are memory related.......just check whether ur releasing the objects at proper place or not..
Other u can put some code snippet to have a look so that we can know actually what's happening with your code..
A common cause for crashes when something repetitive happens (eg switching between tabs, screens etc) is memory problems. Make sure you are releasing the correct objects in the right place. It could very well be that every switch you are allocating objects - without freeing them when switching again. This will eventually consume your memory and crash the application.
Related
I came across the scenario where in if after moving the map immediately if I tap on back icon while the map has not fully loaded
The application crashes.
What I can understand is Since the loading is still in progress and I tap back the the application releases the controller but the google map loads asynchronously in NSRUNloop (not sure). So that might be the problem not sure though.
So does anybody know what can be the issue and is there any way to solve this issue?
Please comment if more description required.
It sounds like that when you close the view, the object that is the delegate for the completed map load has been deallocated, causing the crash with a bad access.
A good way to get to the bottom of these types of crashes is to use Instruments (part of the Xcode suite to tools) and go zombie hunting.
For anyone who is still searching for the answer
What exactly happening was that map view events were getting fired even if the controller was released causing a crash in the app.
So the solution is Before setting the value of objMKMapView to nil you need to set value of objMKMapView.delegate to nil.
I have an app that keeps crashing as soon as it starts. Not sure why. I have image views and buttons in the main xib file. The main xib file is not mainwindow, it is firstview, so i changed it in the plist to the firstview. There may be something wrong with the xib file for firstview but it only has buttons and images and a view in the back. There are no warnings or errors when I run it, just Debugging Terminated when it crashes.
To Debug a crash problem, especially on a small application, do a binary search on removing functionality and adding it back in until you find the smallest thing that when removed makes the crash go away, and when added back in causes the crash. Sometimes this bottom-up search approach is easier than the top-down analytical approach to finding what is the problem. Then when you know what is causing the problem, it's generally much easier to focus on why it is causing a problem.
What's the very last change you made before your app started crashing? That's the one that caused your problem. If you made a lot of changes at once before running your app to test them, now you know what that's a Very Bad Idea (tm)... :-(
You probably want to switch it back to mainWindow, and then add the view as a subview in the app delegate did finish launching. also, you may want to set a break point on obj_c_exception_throw.
I've developed my application using my 3G device to test with. Upon giving this to a friend to test, he's noticed that it crashes..I've had a look at the crash log, but it's not much use except for the "EXC_BAD_ACCESS" statement after a few memory warnings.
On my device, I can use the imagePicker lots, and each time a photo is taken I get a memory warning, but this doesn't cause any problems.
On my friend's device (also a 3G), after a couple of images chosen from the camera, the app crashes.
So, my question is.. I think something is being deallocated because of the memory warning - but only on my friend's device, and then after deallocation, it's trying to be used again. How can I find out what object is being called? I can't use NSZombies because this is a remote (beta) device.
Help please!
Also if anyone has any ideas why my device can pick image after image without any problem and his can't...that would be most helpful
Thanks!
EDIT: New discovery.. I'm getting this error message too: KERN_PROTECTION_FAILURE which I understand to be something to do with data access. The crash seems to happen right after I save the image got from the UIImagePicker. Any ideas?
You may be over-releasing something. If you're running Snow Leopard, run the Static Analyzer (Cmd-Shift-A) and look for memory errors.
The fact that it crashes after a memory error suggests that a UIViewController has released its view. Do you have any UIViewControllers that observe NSNotifications, or otherwise might change their IBOutlets while they are off-screen? This is a common cause of this kind of crash. Make sure you're correctly memory managing your IBOutlets. UIViewControllers should never mess with their IBOutlets (or their UI components at all) when they are off screen. Even if you don't make this mistake, if you're not implementing things as noted in the above link, you can still crash after memory warnings.
MemoryWarning was a pretty good idea, and things have improved, but Apple still hasn't quite cooked all the issues around how it plays with UIViewController. The developer still needs to be very careful.
You should have your friend come to your computer and run it with NSZombieEnabled. That's the best way to debug these issues.
I have an app that has a tabBar Controller and a navBar Controller. It has ~8 views (a variety of web, table, standard, mail, address etc.), some created using IB some created using XCode to make the table views. I've ran the memory leak tester and it doesn't have memory leaks. It can crash at anytime on any of the views, If I flip back and forth between views and use some of the functions it closes the app.
I assume that either I am running 1) out of memory or 2) not releasing views correctly, which causes the app to close. The app is simple so I don't know how I could be out of memory and I've reviewed the code to the best of my ability for releasing the objects correctly.
So Here is my list of questions:
1) What and How to use some of the other debugging tools (or tell me what tools/files I should be looking for using)? I would like to narrow down the problem to its source.
2) What is the best practice for releasing these views? How?
3) How much memory do normal apps use? Is there a number that I should stay around? How do I verify that in the simulator? the Allocation tool?
Feel free to point me to apple docs or other stackoverflow questions that can help me.
UPDATE: It appears to only be crashing one view is used, which has a table view with custom cells... The cell are populated from a plist file... this view worked fine a few days ago, I notice that some cells do not have data from the plist file... it could be a plist file problem with not storing proper data. I'll continue to work on it.
UPDATE #2: I went back to older rev of my files, to when this particular tableView worked just fine (pre 3.0) and guess what it works just fine, I change the simulator to 3.0 with this rev of the app and bam crash on this tableView shows up. Thanks for the help so far, I'll try somethings mentioned below and let you know what I find. If you have some tips on why a tableView w/custom cells from 2.2.1 to 3.0 would start crashing, I'll take them. If I can't get anywhere I'll post the code soon. BTW, I mis-spoke above, I thought it wasn't crashing in the simulator... I was wrong it is.
Solution: thanks for the troubleshooting tips the fix was quite simple, but it's odd it didn't crash in 2.2.1... it should have crashed a long time ago for the problem, I was releasing an object one to many times in my custom cell... duh.
On the first and second generation phone's you really don't want to be going over about 20 megs of real memory usage - once you get over that you are at risk of being killed by springboard.
One of the big culprits I've seen is autoreleased memory, since the autorelease pool can hold onto memory a lot longer than you would really like - if you are using a lot of autoreleased objects that can be a potential problem. You can improve this by doing more explicit retain/release where possible and by creating local autorelease pools manually and releasing them after doing a more intensive operation with a lot of autoreleased objects.
The most effective way to keep track of real memory usage I've found so far is running a debug build on a test phone and running with Activity Monitor. That will give you a clear idea of how much memory is getting taken and held onto by your app. As well as how much is being used when it crashes on you.
You can run with Activity Monitor in Xcode on the Run menu -> Start With Performance Tool -> Activity Monitor.
One other very useful tool is the CLang Static Analyzer that you can run against your code base and can give some very helpful memory management information. As mentioned here.
One thing I would try is putting some debug messages into your didReceiveMemoryWarning method(s). That way, if you are running out of memory, you'll at least have some warning.
Ok so I've got a really annoying bug in my app. It's driving me crazy and I'm sure it's beyond my skill level as I am learning as I go.
Here is the initial rundown of the bug: A shot in the dark - Application bug
However I have found a way to consistently reproduce the bug (only on the device not in the simulator)
First you create a new Pool and save it. Then add 20 blank time entires into one day. Save it and this is where the problems begin. (when you go back to the main detail view the tableview has put itself out of editing mode with being told to do so). Now if you go back to the day to see the time entries you just added they are still there.
If you go back to the main overall tableview listing all pools and now go back to the day you added the times they have dissapeared.
Add one time and it all saves fine. Add twenty and it doesn't save. WTF!!
Main Menu listing Pools:
Detail view:
Edit View:
Time Edit View:
Add a time:
I'd appreciate any more guesses. But as well as this question I'm offering a bounty of £25 (Sorry I'm a poor student) to whoever is good enough to fix this bug first!
if your interested my email is danmorgz[at]gmail.com
Thanks,
Dan
If you haven't already done so, I'd recommend turning on NSZombie support and seeing if you're using any of your objects after they've been freed. As far as I know this can be turned on in the simulator and on the device.
Most likely, you're failing to retain some object somewhere along the way. When an object gets released and then the memory is re-used for something else, you'll get all sorts of bad behavior, including crashes, or mysterious "disappearance" of other objects.
One thing you can try is putting breakpoints into the -dealloc method of your custom classes. Then you can see where they're getting deallocated from. Most likely though, this will end up being when the AutoreleasePool gets drained, which won't tell you much.
Alternatively, look into using some of the memory debugging tools built into Cocoa.
That document is for Mac OS X, but I think most all of this will work in the iPhone simulator, at least. I know that your bug "doesn't happen" in the simulator, but that really only means that the symptoms are different, and you're not noticing them.
Thanks for all your answers. It's now fixed.
For those interested I'd forgotten to add a cellidentifer in the XIB of my cell subclass.
cellForRow: method was therefore creating a new cell every time. The memory got filled up very quick. It then seemed as though my app was automatically trying to cut the fat by forcing another tableView out of editing mode and not managing my instances properly.
Again it's a memory problem. Isn't this always the case!?!
The clue was a one off 101 error in the console indicating my app was using too much memory. Oh and a slow scrolling tableView.