iPhone SDK Point to a specific location [duplicate] - iphone

Question

I'm trying to develop an application that use the GPS and Compass of the iPhone in order to point some sort of pointer to a specific location (like the compass always point to the North). The location is fixed and I always need the pointer to point to that specific location no matter where the user is located. I have the Lat/Long coordinates of this location but not sure how can I point to that location using the Compass and the GPS... just like http://www.youtube.com/watch?v=iC0Xn8hY80w this link 1:20'
I write some code, however, it can't rotate right direction.
-(float) angleToRadians:(double) a {
return ((a/180)*M_PI);
}
-(void)updateArrow {
double alon=[longi doubleValue];//source
double alat=[lati doubleValue];//source
double blon=[pointlongi doubleValue];//destination
double blat=[pointlati doubleValue];//destination
float fLat = [self angleToRadians:alat];
float fLng = [self angleToRadians:alon];
float tLat = [self angleToRadians:blat];
float tLng = [self angleToRadians:blon];
float temp = atan2(sin(tLng-fLng)*cos(tLat),
cos(fLat)*sin(tLat)-sin(fLat)*cos(tLat)*cos(tLng-fLng));
double temp2= previousHeading;
double temp1=temp-[self angleToRadians:temp2];
/*I using this,but it can't rotate by :point even i change the coordinate
in CGPointMake */
Compass2.layer.anchorPoint=CGPointMake(0, 0.5);
[Compass2 setTransform:CGAffineTransformMakeRotation(temp1)];
/* Compass2 is a UIImageView like below picture I want to rotate it around
: point in image
^
|
|
|
:
|
*/

Answer 1

There is a standard "heading" or "bearing" equation that you can use - if you are at lat1,lon1, and the point you are interested in is at lat2,lon2, then the equation is:
heading = atan2( sin(lon2-lon1)*cos(lat2), cos(lat1)*sin(lat2) - sin(lat1)*cos(lat2)*cos(lon2-lon1))
This gives you a bearing in radians, which you can convert to degrees by multiplying by 180/π. The value is then between -180 and 180 degrees, so to get a standard compass bearing add 360 to any negative answers.
atan2 is a standard function related to arctan, that does the right thing for the four possible quadrants that your destination point could be in compared to where you are.

Answer 2

1) Get your current location (from the GPS)
2) Get the differences in latitude and longitude
3) use the atan2 method to get the angle
i.e. (WARNING: untested code)
CLLocation *targetLocation = [CLLocation alloc] initWithLatitude:1 longitude:2];
CLLocation *sourceLocation = <get from GPS>
double dx = [targetLocation coordinate].latitude - [sourceLocation coordinate].latitude;
double dy = [targetLocation coordinate].longitude - [sourceLocation coordinate].longitude;
double angle = atan2(dx, dy);
You might have to tweak that to get it to compile but the idea is there!

Answer 3

I did this some time ago, here are two different implementations. The first is similar to your approach, the second is without the trig math. The first is what I used in my app, but the second seemed to work as well, though doesn't appear to be as clean. You will need to also remember to offset this bearing based on north in your UI.
- (double) toRadian: (double) val
{
return val * (M_PI / 180);
}
// Convert to degrees from radians
- (double) toDegrees: (double) val
{
return val * 180 / M_PI;
}
// convert from a radian to a 360 degree format.
- (double) toBearing: (double) val
{
return ( (int)([self toDegrees: val]) + 360 ) % 360; // use mod to get the degrees
}
// Calculate the bearing based off of the passed coordinates and destination.
//
- (double) calcBearingWithLatitude:(CLLocationDegrees)latSource
latitude:(CLLocationDegrees)latDest
longitude:(CLLocationDegrees)lonSrc
longitude:(CLLocationDegrees)lonDest
{
double lat1 = [self toRadian:latSource];
double lat2 = [self toRadian:latDest];
double dLon = [self toRadian:(lonDest - lonSrc)];
double y = sin(dLon) * cos(lat2);
double x = cos(lat1) * sin(lat2) - sin(lat1) * cos(lat2) * cos(dLon);
return [self toBearing:atan2(y, x)];
}
And the second.
// got this code from some forums and modified it, thanks for posting it coullis! Mostly here for reference on how to do this without sin and cos.
- (CLLocationDegrees) altCalcBearingWithLatitude:(CLLocationDegrees)latSource
latitude:(CLLocationDegrees)latDest
longitude:(CLLocationDegrees)lonSrc
longitude:(CLLocationDegrees)lonDest
{
CLLocationDegrees result;
// First You calculate Delta distances.
float dx = lonSrc - latSource;
float dy = lonDest - latDest;
// If x part is 0 we could get into division by zero problems, but in that case result can only be 90 or 270:
if (dx==0)
{
if (dy > 0)
result = 90;
else
result = 270;
}
else
{
result = [self toDegrees: atan(dy/dx)];
}
// This is only valid for two quadrants (for right side of the coordinate system) so modify result if necessary...
if (dx < 0)
result = result + 180;
// looks better if all numbers are positive (0 to 360 range)
if (result < 0)
result = result + 360;
// return our result.
return result;
}

Answer 4

Use this. You will have to subtract out your actual compass heading from the result of getHeadingForDirection to determine the proper relative heading. Return value is heading in radians.
-(float) angleToRadians:(float) a {
return ((a/180)*M_PI);
}
- (float) getHeadingForDirectionFromCoordinate:(CLLocationCoordinate2D)fromLoc toCoordinate:(CLLocationCoordinate2D)toLoc
{
float fLat = [self angleToRadians:fromLoc.latitude];
float fLng = [self angleToRadians:fromLoc.longitude];
float tLat = [self angleToRadians:toLoc.latitude];
float tLng = [self angleToRadians:toLoc.longitude];
return atan2(sin(tLng-fLng)*cos(tLat), cos(fLat)*sin(tLat)-sin(fLat)*cos(tLat)*cos(tLng-fLng));
}