Eclipse has the Mark Occurrences feature where it highlights all occurrences of a selected variable/method. Is there a way to navigate to next or previous marked occurrence?
To skip between highlighted occurrences only, try the following:
Above the editor Window, select the down arrow next to the next annotation button.
Adjust the selection so that only "Occurrences" is marked.
Now, when you click on an item to highlight it, you can skip forwards and backwards to other occurrences using Ctrl+(comma) and Ctrl+(period).
After selecting a piece of text:
Next occurrence is ctrl+k.
Previous occurrence is ctrl+shift+k.
If you are looking to navigate through variables / methods defined in the same class, a quicker way to do this would be to select ( highlight ) the variable / method name you want to navigate to and use Alt + Shift + R to get into the refactoring mode and then use Tab or Shift + Tab.
Tab - takes you to the next occurrence
Shift + Tab - takes you to the previous occurrence
This way will save you from reaching mere text matches ( including those in comments ), as how Ctrl + K behaves. So you are taken through only "valid" occurrences.
Use Ctrl+> or Ctrl+<
and it's quite easy to remember because > < works as arrow pointing in the direction where you navigate.
Related
I want to select multiple lines and put a cursor at the beginning of each line. Sublime Text can do this with Ctrl-Shift-L
select multiple lines
ctrl + shift + L and then put cursor at beginning of each line
Press Crtl + Shift + Alt + Arrow up/down to select multiple lines in Visual Studio Code. Note that the selected lines will be in one column (if possible).
You can also mark some lines and then do this combination and you have all selected lines included.
Moreover you can press and hold Alt and click the lines you need. This way you can select multiple lines that are not neighbours or in the same column.
To do exactly what Ctrl-Shift-L does in Sublime Text, you must do:
On Windows:
Select the lines.
Alt-Shift-I (will add multiple cursors)
Shift-Home (will go at the beginning of each line and be selected)
On Mac :
Select the lines.
alt-shift-I (will add multiple cursors)
cmd-shift-←
(will go at the beginning of each line and be selected)
More information in this answer.
Put cursor at beginning of first line
Ctrl-Shift-Alt-Arrow down/up will put a cursor at the beginning of the following/preceding lines
Ctrl-I will select those lines with the cursor at the beginning of each line.
NOTE : On my vscode the cursors look like they might be shifted down one line but they actually are not - the are in the right place. If you start typing, it works but you have to hit Enter when you are done to get back separate lines. It is a little quirky but works as you would expect.
EDIT (using a hint from #Maxime's answer)
Select your test first.
Alt-Shift-I : puts cursors at the end of each of those lines but text unselected (I as in island not a lowercase L)
Function-Home : put cursors at beginning of each line.
Ctrl-I : selects all lines.
Important: read the NOTE above.
--------------------- v1.43 see How to put the cursor at the end of all selected lines in Visual Studio Code? with column selection mode it is easy to put the cursor at the beginning or end of lines selected by dragging.
You can hold alt and click the places you need with the mouse. This way you can select rows that aren't related, like row 10,15,18. Also you can select at different places in the same row.
I hope this helps someone, but there is a setting in VSCode called Editor: Multi Cursor Modifier which may do what OP is asking:
I have a list of data to which I need to put a ' symbol at the start of the line and at the end of the line. So the original data looks like this:
abcde
cdeab
deabc
eabcd
And I want all of the lines to look like this:
'abcde'
'cdeab'
'deabc'
'eabcd'
In my real data, I would have 10,000 of lines. So if I can do something like Ctrl+Shift+A to select the entire document and then have some magic shortcut to change from selecting all lines to editing all lines that would be perfect!
You could edit and replace with a regex:
Find (Ctrl+F):
^(.+)$
Replace:
'$1'
This regex finds any content on a line and wraps it inside quotes. The $1 refers to whatever is matched inside the parentheses in the regex. In this case, it's "one or more characters" i.e. everything on the line. Be sure to tick the regex icon.
If every line may or may not have a space before the content, and you want every line to have a space, try this:
Find:
^ ?(.+)$
Replace (notice the space before the first quote):
'$1'
Here is an easy way to do this:
Ctrl+A to select all or select your desired text.
Shift+Alt+I to put a cursor at the end of each line.
Type your ' (or whatever you want at the end).
Home will move all your cursors to the beginning of the lines.
Type your ' (or whatever you want at the beginning of all the lines).
You can use the Alt + Shift shortcut.
First press Alt + Shift then click the mouse button on the first line.
Go to the last line, and then do the same.
This will mark all the parts of one side. Whatever you type will be reflected in the marked spaces.
Do the same on the other side too.
Use Toggle Multi curosr Modified from action pane.
Select the cursor points with ctrl + <Mouse click> , you can modify everything simultaneously.
This will require lots of manual efforts if lines are more
You can use Find and Replace.
Besides, paste to Excel and using a function to add character '.
The first thing that came to my mind - replace abcde with 'abcde' line by using option Find and Replace option. I'm pretty sure Visual Studio Code has something similar to that.
You can use the Shift +Alt shortcut for windows and for Mac use Shift + Option
First press Alt + Shift/Shift + Option then click the mouse button on the first line.
This will mark all the parts of one side. Whatever you type will be reflected in the marked spaces.
Place Cursor where you want to insert/delete text.
Goto Selection Menu and choose Column Selection Mode
Scroll to the bottom of the data and shift + click in the last line where you placed the first cursor.
Perform action (add/delete whatevs)
Repeat for whatever other areas you want to change.
v: 1.74.3
1- You can use the Ctrl + H shortcut (menu Edit → Replace)
Enter abcde in Find Control.
Enter 'abcde' in Replace Control.
Then press Ctrl + Alt + Enter.
I cannot figure out how to do this for the life of me apart from doing a find-replace on 4 spaces and converting to tabs (Version 0.10.2). I can't think of an editor/IDE that doesn't have a specific feature to do this. Does VSCode?
Since fix of: https://github.com/Microsoft/vscode/issues/1228 the editor supports it out of the box. Simply go for:
F1,
indentationToSpaces or indentationToTabs (depending on your need)
Enter.
Another way to do it is click the current indentation (Tab/Spaces:n) on the footer which will open your indentation options where you can select what you want to do.
If you are trying to convert non-leading tabs to spaces (or vice versa) you can use a regex search and replace.
Press CTRL + H
Click the .* button to search using regular expressions.
To search for tabs enter [\t] in Find box.
Enter spaces in Replace box and perform your replace.
Search box in regex mode:
To round out these answers, I will add my take for converting each tab to n spaces.
Highlight a tab character
Use CTRL + F2 select all occurrences
Press SPACE n times
This is the easiest way to do this (going beyond only converting leading tabs).
Note that this does not convert consecutive tabs to k spaces. It converts each tab. For consecutive tabs please see my comment on jrupe's answer. You will need VS Code find and replace with regular expressions to accomplish that.
Select Replace: CTRL-H
Enter Horizontal Tab in Find box: hold ATL and type 009 on the keypad.
Enter a space(or more spaces) into the Replace box: press space bar
Press Enter to begin replacing Tabs with Space(s).
Press F1 and then type into textbox convert indentation to spaces or whatever you want ones
On Visual Studio, Ctrl+K+F did the trick for me.
Fast forward to 2020/2021, there are some extensions that will give us that conversion. I have just needed that functionality (hence I found this article), and searching for extensions I found:
geocode.spacecadet - providing both TAB->SPC and SPC->TAB, but not updated since 2017, with 1.3k installs, 3.5 review
takumii.tabspace - TAB->SPC, from 2020, 1.5k installs, no reviews
pygc.spacetab - SPC->TAB, from... wait, literally yesterday! (or today depending on your TZ), 2 installs, no reviews
is there an option or plugin for eclipse which would enable multiple simultaneous selections in the same editor.
In sublime text, selecting some text and then pressing Ctrl+d will add next instance of the same text to the selection if possible. After selecting the instances needed the editor has multiple carrets (not necessarily on the same or adjacent columns and rows). In this mode it is possible to move all cursors forward or back simultaneously and to edit all instances of text simuntaneously.
I find this feature very usefull and miss it sorely in eclipse..
This Eclipse plugin attempts to provide this feature: https://github.com/caspark/eclipse-multicursor. From the README:
What is this?
A work-in-progress attempt to provide Sublime-Text-like
multi cursor support for text editors in the Eclipse IDE.
What works?
Multiple identical lines can be edited simultaneously using Eclipse
linked mode editing (similar to existing "rename in file"
functionality)
Next steps
"select next" functionality + associated editing using Eclipse linked
mode
"find next" + associated editing
editing of non-identical text / editing without using linked mode
split selection to lines
regexp support for find next
This feature is available in LiClipse.
See it in action (more towards the end of the video).
It supports linking with Ctrl+K, unlink with Shift+Alt+K, Ctrl+Alt+mouse double click to select words or Ctrl+Alt+Mouse to make a selection of a region (or just end lines).
Preferences>General>keys>Rename - refactoring
I changed the binding to command + shift + R when > Editing Text.
Sorry for bringing up an old question, stumbled upon it after searching google for the problem
Alt + Shift + A, then you can hold shift and use the cursor in multiple lines.
Like Ctrl+D I could not find, but like Alt+F3 in sublime (multiselects all matches), you can do by pressing Alt+Shift+R, or select text > right click > refactor > rename.
Must say that this does not work with any kind of text. It works with names of variables, functions, classes etc.
Tested on Eclipse 3.8.1
ALT + SHIFT + F worked for me.
You can see shortcuts for all here:
Goto -> Window -> Preferences -> General -> Keys and search for replace then you will see binding for Find and replace. In the bottom of that window, you can add your key to Binding text box. There you can add or edit any keys as shortcut.
If you want to replace selected word's matching words or find selected words, use below keys because you do not need to select all words in eclipse:
Ctrl+F gives me Find/Replace dialog box.
Or you can,
First Alt+A
Next Alt+F
Then press on Replace or Search button occurding to your need.
I would like to search multiple files via eclipse for the following 2 lines:
#Length(max = L_255)
private String description;
and replace them with these two:
#Length(max = L_255, message="{validator.description.len}")
private String description;
Another tip on how to get the regex for a selected block.
Open one of the files that contains the multiple lines (multiline) to search or replace.
Click Ctrl+F and select "Regular expression". Close the Find/Replace window.
Select the block you need and click again Ctrl+F to open the Find/Replace window.
Now in the Find text box you have the regular expression that exactly matches your selection block.
(I discovered this, only after creating manually a regexp for very long block :)
Search are multi-line by default in Eclipse when you are using regex:
(\#Length\(max = L_255)\)([\r\n\s]+private)
I would like to add "private String description;"
(\#Length\(max = L_255)\)([\r\n\s]+private\s+?String\s+description\s*?;)
replaced by:
\1, message="{validator.description.len}")\2
It works perfectly in a File Search triggered by a CTRL-H.
As mentioned in Tika's answer, you can directly copy the two lines selected in the "Containing Text" field: those lines will be converted as a regexp for you by Eclipse.
CTRL+H does take two lines if you use regexp (and you don't have to write the regexp by yourself, eclipse does that for you).
Select your lines.
Click CTRL+H. The search dialog opens up.
If "Regular expression" is already checked, eclipse will have converted the two lines you search for into regexp for you, click Search.
If "Regular expression" if not already checked", check it and click Cancel (eclipse remembers your choice).
Select your lines again.
Click CTRL+H. The search dialog opens up. This time "Regular expression" is already selected. eclipse will have converted the two lines you search for into regexp for you, click Search.
A quick tip for including multiple lines as part of a manually constructed regular expression:
Where you would normally use .* to match any character zero or more times, instead consider using something like (?:.|\r?\n)*. Or put an extra ? at the end to make it non-greedy.
Explanation: . doesn't match new lines so need to do an "either-or": The parentheses match either the . before the pipe or the new line after it. The ? after \r makes the carriage return before the line feed optional to allow Windows or Unix new lines. The ?: excludes the whole thing as a capturing group (which helps to avoid a stack overflow).
Click Ctrl + F and select "Regular Expression" and then search the lines. In case to perform the same on multiple files, click Ctrl + H, click on 'File Search' and perform the same.
Select the folder that contains all your files and press Ctrl+H.