I'm having a hard time fixing memory related issues in my iPad application, but, good thing is, that I've learned about "heapshots" because of that. Bad thing is, I'm still unable to figure out what some of the information provided to me means.
So, what are these non-objects which are still alive and takes most of the memory described in Heap Growth? Is it possible to get rid of them? It looks like that most of them are related to various drawing operations, CALayer, context and etc (Category:"Malloc" or "Realloc"). I can provide more details if needed.
It means that memory block was allocated not for an object (e.g. pure c structure).
Usually they are allocated by system framework code, so there are some other objects that leaks. E.g. if you forgot to release UIView, then it's layer will not be freed too.
You can open "Extended detail" panel (see "View" menu) and analyze the call stack. Take in mind that one release you forgot can lead to a lot of memory leaks, so try to fix the easiest leaks and then check whether other leaks disappears.
One more trick. You can disable functional block of your application one by one and see whether leaks disappears. So you will be able to locate module (class, functional block, etc) where it occurs.
Related
I have a hard time figuring out, where my app is leaking. I have tested it with the "Instruments" profiling application by allocations, with heapshots. This is what I got:
As you can see, the allocations is increasing. It increases every time I transitions between two views, with an fade effect. In which of the following heapshots should I look in, in order to find the leak and what kind of objects should I look after, when I go through the heapshot/heapshots?
Thank you for the help in advance :).
ARC can only deallocate the memory if you are not holding any references to it anymore. Since the leaks instrument doesn't indicate any "real" leaks (in the sense of memory that you don't have access to anymore), you are probably seeing a case of abandoned memory. You are still holding references to objects which you don't need anymore, so they don't get deallocated.
It doesn't really matter which snapshot you inspect after the baseline. The list of objects in a snapshot can be somewhat overwhelming though... but often it helps to filter it down to your own classes. You can do this by typing your class prefix into the search field in the upper right. If none of your classes show up in the snapshot, you can at least look for classes which you directly use.
Also make sure to enable the "Record reference counts" option in the inspector pane of the allocations instrument. When you have this enabled you can click on the little right-arrow next to the objects listed in a snapshot (not the class name, but the object represented by its memory address) and see a complete history of this object. This makes it easier to see who is holding references to it.
Hope this helps!
Build your code with the 'Analyze' option; track down and eliminate every issue.
While developing apps in Xcode memory leaks are occurring. When I checked them in extended detail view they are showing different methods that are not related to implemented. How to exactly find out which object is leaking and where it is leaking memory.
When ARC is enabled we have to take care of memory leaks or not?
Even with ARC memory leaks can occur, it just inserts release and autorelease during compile time.
1. You must check for leaks using Build and analyze in XCode, shift+command+b you should be clearing those issues.
2. After that you can start using the instruments by using profile option command+i . This will point you to where the leak might be.
This link will help you too http://soulwithmobiletechnology.blogspot.in/2011/04/how-to-check-memory-leaks-in-xcode-4.html
Edit: Added some screenshots to hopefully make it clear.
During profiling after selecting leaks choose the call tree option and check the boxes hide system libraries , invert call tree and show obj-c only as shown in image below.
After double clicking the symbol name below you'll get the line where it is leaking.
You'll get something like this.
Yes, even with ARC there are memory leaks. ARC is not a garbage collector, it only inserts for you, at compile time, retains, releases and autoreleases in key positions. So although it does help the developer, you should be aware that memory leaks still exist (for instance circular referencing). You can start by using the Static Analyzer and correct any problem it shows you. You can then go to Instruments and choose Leaks.
i m facing big problem with system libraries allocations.
i didn't get any leaks from my application still so much allocations.i attached various screen shoots. in my application using custom picker which get all images from assert library.which are pick from picker showing images on scroll view.
its screen shot when my app with 35 images on scroll view.if again i pick images from custom picker allocation increased.i am seeing object details its all related to frame Work allocations.not from my application
see the allocation object list response library is DYLD.
its my leaks screen shot
how can we release these allocations? please help me out ?
Just because you have no leaks doesn’t mean you are managing memory correctly. What you have is what I call memory bloat — you are retaining it longer than you need to. (A leak is allocated memory with no references. Bloat is allocated memory that has a reference but should have none.)
http://www.friday.com/bbum/2010/10/17/when-is-a-leak-not-a-leak-using-heapshot-analysis-to-find-undesirable-memory-growth/ will give you some good strategies for using Instruments to find them. (This is a very credible source, so far as I know he still works at Apple.)
make sure your application has no leaked objects and they will also disappear in instruments. For sure its pointing to a system library but it is always a result of your bugs. Select one of them and open the right view. Probably it will show you the right code stack and the allocated line of code.
The other thing you can do: run the static analyzer Product->Analyze it will find all (at least most) your leaks ;)
In my cocos2d application I have run through it using instruments and removed all memory leaks. I have my game outputting how much memory is in use on the screen and it is constantly rising as the game progresses until I eventually run out of memory. The amount of objects on screen doesn't increase by very much each level. Its a fairly simple game so i should not be running out of memory so soon.
I am removing all objects from a level when it ends and reallocating new ones when a new level begins. Instruments tells me there are no memory leaks. When i run through instruments to show me where the allocations are the bulk of the problem doesn't seem to come from one place its all of my objects.
Any ideas what the issue might be?
Just because instruments doesn't show leaks, doesn't mean you're not still allocating memory you're not using. Pay attention to the ObjectAlloc graph and see if that is constantly rising without falling off.
If you allocate memory that you aren't using and can't clean up, that's just as bad as a leak, even though you haven't technically leaked anything because you've stashed some unused reference somewhere.
Look at how much memory you actually need to use or to keep for future use at any point in your app, then treat anything else previously allocated as a leak and fix it.
In Objective-C when using autorelease objects be wary of circular dependencies!
If you create object A and then an instance of object B and pass A to it, so that B retains A, and A also retains B (for example by adding it as child to A) you can easily setup a circular dependency and thus both objects won't be released.
Tip: add a -(void) dealloc method to all your scene classes, and set a breakpoint there. If you change a scene and its dealloc method isn't called after the scene transition has finished, you're leaking this scene (it's not released).
Try to find that leak by looking for a setup that's similar to the one I described above.
Be careful about autoreleased objects, since they are not released immediately. If you have sections with lots of allocations and autoreleasing, try using specific autorelease pools on them.
It happened to me when creating huge decision trees (using NSArrays) for a game AI.
A great way to check for objects that are aggregating in memory is to use Instruments' new (in Xcode 3.2.3) Heap Shot functionality.
Use the normal Allocations instrument against your running application. Perform a series of repetitive events that should come back to some known state (for example, go one level down in a navigation controller and come back). Every time you do this, click on the Mark Heap button in the left sidebar for the Allocations instrument (under the section heading Heapshot Analysis).
What this will do is mark the heap at each of the starting points for this repetitive action and compare the objects that have been created by that point with the objects that had been created by the time you marked the heap last. Only objects that have been created between those two points and are still alive in memory will be listed.
If you are accumulating objects, but they are either not leaks or are being missed by the Leaks tool, they should show up here. I've found a number of subtle memory buildups this way, particularly when you pair this with the UI Automation instrument to automate the repetitive actions you're testing.
The bulk of the problem seem to be that Sprites don't get released in cocos2d unless all actions have been stopped on those sprites. This is done using stopAllActions. Cheers for all the suggestions.
I have been hunting down memory leaks for some time in my app. As of right now, as I flip back and forth between two views while watching the memory monitor instrument, the real memory fluctuates between 5 and 6 megs. This is all fine -- as far as I can tell everything is getting released properly when I pop back off a view. However, the virtual memory continues to increase and my available real memory drops rapidly every time I push the view back onto the view stack (even though the real memory usage of the app isn't increasing). Eventually, this all leads to an out of memory crash. Is this a telltale sign of any specific issue, or am I just missing a memory leak somewhere?
EDIT: The odd part is, I get an out of memory crash while the app is still only using up about 5 megs of real memory.
Do not use -retainCount.
The absolute retain count of an object is meaningless. It is an implementation detail. It may be influenced by many factors well beyond your code.
You should call release exactly same number of times that you caused the object to be retained. No less (unless you like leaks) and, certainly, no more (unless you like crashes).
See the Memory Management Guidelines for full details.
In this specific case, you are leaking memory but in a way that leaks can't find it. The objects that are leaked are still connected to your overall application's object graph somehow. Maybe through a notification, maybe through delegation, doesn't matter -- leaks sees the reference and concludes that the object might still be live.
Use the Allocations Instrument. Configure it to only track live allocations (since you don't care about objects that have been deallocated). Do some stuff with your app. Check out what Allocations knows about and explain why all those objects should stick around. You can use the data mining facilities to filter down to just your objects.
Anyway, you can also use the "Build -> Build and analyze" option to find suspicious non-conventional code.
Another reason why you may have memory lost in lower API layers is if you don't remove all your views from your view hierarchy (aka : not calling [view removeFromSuperview] everywhere). At least that's what seemed to have happened to me.
Note that most of time this isn't required, as you would simply release the main view and all its subviews, then rebuild it from the view controller when needed. Things start to get more tricky when you're not releasing the whole hierarchy but instead simply remove some of them from the hierarchy.
In that case, I came to the conclusion that you may have buffers or layers still cached in lower API parts, and in that case your Allocation instrument won't help you.
In order to monitor correctly you'll need to use the "Memory Monitor" (in System). You'll see that the "Physical Memory Free" line dropping close to 0 is the most reliable indicator that a Memory Warning will be issued.
Another advantage of using this instrument, is that you can attach it to a running process, thus making it possible to have console output and instrument running together easily.
Circular references also won't be counted in Leaks but you can track those in Allocations. Best bet is to fire up Allocations and get to a state where you think everything should be gone (or certain objects should be). If they're hanging around go dive in to them and look at where they've been retained and sort out the proper memory ownership/releasing.
As for Allocations, there are some things that it doesn't track that can affect the overall memory. Some of the things include some CGImage backing stores, some CoreAnimation stuff and some database stuff.
Have you used the "Leaks" Performance Tool? And check out the logs in Organizer to see if there's anything there.
Also look into the dealloc for the view controllers and make sure you are properly releasing all of it's objects?