When I create a “development” glassfish (3.1) domain with netbeans (6.9) then no passwords are needed. Everything works magically.
Nice on the first glance. Until you actually need to know the admin user and password.
The normal combination admin / adminadmin does not actually work.
Also the normal master password changeit won't get me anywhere.
Does anybody knows which credentials netbeans uses when creating a glassfish domain?
Of course I tried to create a domain using asadmin. But then NetBeans does not like these domains all that much, i.e. NetBeans starts to ask for passwords, automatic start of domain does not work any more. Trouble without end.
Update 1:
I tried to use empty passwords as suggested but this does not work either:
Authentication failed for user: admin
with password from password file: …\Domain.properties
(Usually, this means invalid user name and/or password)
Command create-file-user failed.
Am I between the hard rock and the deep blue sea here? NetBeans created domains don't work with command-line and command-line created domains don't work with netbeans?
Well I figured it out myself (again - when will I finally get my self learner badge?)
The problem is that the admin user is:
--user anonymous
no where documented. I only found it in the config/admin-keyfile. The password then is indeed empty as vkraemer suggested:
AS_ADMIN_MASTERPASSWORD=
AS_ADMIN_PASSWORD=
Thanks for the help.
Most obvious answer missing? Netbeans - > Services - > Glassfish -> Properties -> Password show?
If you use NetBeans to create a development domain, it does not have a password. Sending one to the various commands will cause problems.
First, login to the Administration Console using admin/adminadmin and then change the password. After that, you will be able to connect from Netbeans. I did that with Netbeans 8.
Remove username, password in development environment.
Related
I have set up JBoss Fuse, created a fabric and installed the fabric:web feature as explained in the resource Using the Management Console. I can browse http://hostName:8181 and it shows the Management Console login screen.
However, whichever user/pass combination I try, the response is "Failed to log in, Forbidden". It also shows an icon with an exclamation mark, when I click that I see the following messages appear:
[Branding] enabled branding
[Core] Management Console started
That does not help much either. How do I know what login combination I should use? It is not clear to me what I am logging into in the first place.
In your fuse install folder under /etc there is a file called user.properties. Is the user admin with password admin filled in? If not, then at least admin user should be allowed.
If yes, try simply restarting the server. I am not sure why buy that has helped in some cases for me. Do a osgi:shutdown and then start it again.
Have you tried admin/admin?
I believe those are the default credentials.
I'm trying to get Eclipse Luna (on Debian 8) to connect to the Internet via a WiFi proxy that requires authentication. I am able to set the proxy host, port, username and password after which I apply the settings and close the dialog. The next time I open it, it does not have the username and password settings, although the host and port are retained correctly. The Active Provider is set to Manual as required.
For some reason, it doesn't seem to be saving the authentication details and I'm not able to connect to the Internet.
Is this a bug or I'm I doing something wrong?
Also, in what file does Eclipse store the proxy settings? Maybe I can go in there and make the changes directly if this is a GUI problem.
Edit: A look at the Error Log gives a vital clue. It says: No secure storage modules found.
I worked around this issue by adding the proxy settings to the eclipse.ini file as specified in this SO post.
-vmargs
-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4
-Dhttp.proxyHost=*myproxyhost*
-Dhttp.proxyPort=*myproxyport*
-Dhttp.proxyUser=*proxy username*
-Dhttp.proxyPassword=*proxy password*
-Dhttp.nonProxyHosts=localhost|127.0.0.1
I was surprized not to be able to connect to my account through appcfg my password was right, butthe app ansered it's not.
When I change the google setting : https://www.google.com/settings/security/lesssecureapps to make Access for less secure apps enabled, it worked.
Is there something I'm missing or must i have this security hole open to be able to use appcfg?
Please notice I'm using eclipse to publish my apps, and the eclipse plugin connects with even if the accont security is safe, but calling appcfg from the command line for roll back was the operation that failed...
I thought eclipse uses the command line to upload my app? I'm obviously wrong.
So the question is: is there something I have to do to be able to have Access for less secure apps disabled and use appcfg ?
Workaround is to use an OAuth2 token instead of using password based authentication.It is more convenient.
just add the option --oauth2 before the update, you get a key which you paste in for appcfg
I recommend you to try uploading your GAE app from the command line by:
Open CMD
Going to the GAE \ BIN directory
Enter the following command:
appcfg.exe update PATH_YOUR_APP_WAR
After that you will be required to enter your GAE email address and password, that's it
Is there any way of changing Wildfly's Management Realm's password through config files of some sort? I kinda lost my password (my LastPass add-on for Firefox is kinda messing up with me). If there is, how?
Passwords by default are stored in
$WILDFLY_HOME/standalone/configuration/mgmt-users.properties
but passwords are hashed.
Best thing you can do is to remove the user you want and then re-add it via add-user.sh/.bat script you can find in bin folder.
If you are using WildFly the add-user utility has the ability to replace existing passwords, just run it again for a user with the same username and it should give you the option to replace the password.
What's the JBoss 5.x EAP default web console password?
The default credentials are:
login: admin
password: admin
But if you use EAP these credentials are turned off by default and there is no active user (security reasons :)). If you want to turn on these users, you have to edit the following file in your current profile: ./deploy/management/console-mgr.sar/web-console.war/WEB-INF/classes/web-console-users.properties. It should be enough to remove the # sign from the line with the user.
If you want to create a new user, don't forget to set up the correct groups in web-console-roles.properties file.
You can easily find information where these information are stored: just open the ./conf/login-config.xml file and find the proper security domain definition. In the case of the Web Console application, it will be web-console policy.
Also if you want to have access to JMX, you have unlock JMX Console. Just check the following files in the conf/props/ directory (in your profile): jmx-console-users.properties and jmx-console-roles.properties.
I just had to uncomment the line in jboss-eap-5.0\jboss-as\server\default\conf\props\jmx-console-users.properties
admin=admin
Thats it. Restart Jboss and I was about to get in to JBOSS JMX. Magically this even fixed the error that I used to get while shutting down Jboss from Eclipse.
I can also verify the above solution except I had to change in
**..\server\<server profile>\conf\props\jmx-console-users.properties**
If you are using Talend MDM Server, the login is:
login: admin
password: talend
See more: http://wiki.glitchdata.com/index.php?title=TOS:_Accessing_the_Talend_MDM_Server
This differs from the default JBoss login of admin/admin
The password setup file is also login-config.xml in this case.
I suggest visit Add digest auth in jmx-console and read oficial documentation for Configure admin consoles, you can add more security to your JBoss AS console and at these link explains where are the role and user/pass files that you need to change this information for your server and how you can change them. Also I recommend you quit all consoles that you don't use because they can affect to application server's performance.
Also there are others links about securing jmx-console that could help you, search in jboss as community site for them (I can't put them here for my actual reputation,sorry). Never you should has the password in plain text over conf/props/ files.
Sorry for my bad English and I hope my answer be useful for you.
just commenting the line of user and password in file
./server/default/conf/props jmx-console-users.properties worked for me
Step 1:
jmx-console-users.properties
admin=admin
Step 2:
jmx-console-roles.properties
admin=JBossAdmin,HttpInvoker
Step 3: Restart or start the JBoss instance.
Now you should good to go...
Go to the jmx console, enter JBoss login URL, then enter admin as username and admin password.
as suggested in other posts, probably you don't have any user defined. it's not advisable to manually edit the configuration files. you should use the add-user (.sh or .cmd) utility as explained in https://access.redhat.com/documentation/en-US/JBoss_Enterprise_Application_Platform/6/html/Installation_Guide/chap-Getting_Started_with_JBoss_Enterprise_Application_Platform_6.html#Add_the_Initial_User_for_the_Management_Interfaces