I am still quite new to Drupal and have very limited programming skills.
I am trying to build a job board site using cck + views. I have created 2 related content types: a "job post" and a "job application" - both are related using a nodereference field.
The job application node has 4 fields: id of the job post to which the person is applying, email of the applicant, cover letter (body field) and attached cv (cck field that allows users to attach/upload a document).
Question: Once a job application is created I would like the content of the node (including the attached file) to be automatically sent via email to the person who posted the job (destination email address is in a cck field in the related "job post" node).
Thus my requirements are: (1) to automtically "transfer" the destination email address from the "job post" content type to the "job application" content type; and (2) to automatically send all the "job application" node contents + file attachment to the destination email.
Is there any module that can help me achieve this?
Thank you so much for your support.
My email address is: wedge.paul#gmail.com
To give it to you straight: No, there is no module that will do this. Largely because you have already made most content types and it is pretty unique to your project.
Still, you may not have limited programming skill, I would advice learning it when working with drupal. What you are asking is really not that hard to create by writing a custom module. Writing a custom module is really not that hard, and starting to write a custom module in Drupal is really well documented.
I can tell you what to use in the custom module, however it is better if you create it yourself (for future projects).
So you create your custom module:
function mymod_nodeapi{ //here all the action happens when a node is created
switch ($op) {
//if the node is inserted in the database
case 'insert':
//if node is a job application
if($node->type = "jobapplication"){
//using node_load function, you can load other nodes in a variable
$relatednode = node_load($node->nodereference);
//using drupal_mail function, you can mail people
drupal_mail();
}
break;
}
}
This code has not been tested and can't be copy pasted. However node_load and drupal_mail as well as hook_nodeapi... use those functions and you'll get there.
Lullabot's video tutorial "Learning CCK for Drupal" is based on the concept of a job application/posting site as a case study. It may be worth investigating.
no, I'm not connected in any way to Lullabot; just a fellow Drupaler
Related
i would like to have a type that represent proper nom, such as family name for exemple but i can't find anything on this.
My goal is to send a info to an other personne using google assistant and my backend.
For exemple the user can say "Send this info to john smith" the info is stored in my backend so i have no problem finding and i got the id of the personne who is talking to the google assistant so this is no problem either.
The problem is how can i get john smith as a parameter that i send to my webhook? So my backend can verify the user list in my database and send the info if the user existe. I tried to use Type but a family doesn't match any pattern because it's can be anything...
If anyone know how to use google action builder with proper noun i would be grateful to know how i can manage to do it.
You have generally two options.
Free form text approach
First you can create a "Free form text" type which can catch pretty much anything being said.
Then a custom intent can be trained with a few examples to pull out the correct proper noun (or anything else). Your webhook will be able to match at that point.
Type Overrides approach
Alternatively, you can create a new type that starts with a preset of sample names that you use in your custom intent. Then, when the action starts, you can get the user's personal contact list in the webhook and set session type overrides.
Here's an example of the code I got from a music player action:
conv.session.typeOverrides = [{
name: 'genre',
mode: Mode.TypeReplace,
synonym: {
entries: Array.from(trackGenres).map(genre => ({
name: genre,
synonyms: [genre]
}))
}
}]
Depending on your system architecture, one of these may make more sense than the other. The first is better at capturing everything, but may require more post-processing on your webhook. The latter is better at precision, but may mean names may not match if they don't match entirely.
I'm making by a requirement a code able to send an E-mail to an specific list of E-mails, due the fact that I must to include the attachments of the record I decided to use an apex class instead an e-mail alert. This object (A custom object ) must populate some fields in an email template with some of the record´s fields. I implemented the following code
Messaging.SingleEmailMessage mail = new Messaging.SingleEmailMessage();
mail.setToAddresses(lista);
mail.setTemplateId('00X21000000QR22');
//mail.setWhatId(idMinuta);
mail.setTargetObjectId('005d0000005NMIx');
mail.setSaveAsActivity(false);
List<Messaging.Emailfileattachment> fileAttachments = new List<Messaging.Emailfileattachment>();
for (ContentVersion document: documents)
{
Messaging.Emailfileattachment efa = new Messaging.Emailfileattachment();
efa.setFileName(document.Title);
efa.setBody(document.VersionData);
fileAttachments.add(efa);
}
mail.setFileAttachments(fileAttachments);
Messaging.sendEmail(new Messaging.SingleEmailMessage[] { mail });
I understood that to make the fields merge it´s necesary to use the WhatId method. In the related code, I have commented it because It generates an error (INVALID_ID_FIELD, WhatId is not available for sending emails to UserIds.)
My question is, if is it possible to do this with a custom object. I´m a little confuse with salesforce documentation beacuse it looks like the method supports a custom object, or maybe If I am forggeting something to include in the code.
If i keep the WhatID line commented, effectively the email is sent with the attachments and the Template but it is not populated.
I really need this kind of solution because the org have in this object at least 20 email templates, for me will be easier just to pass the Id of the template instead of makig a code with 20 different html codes for each situation
Thanks a lot
Please publish this question at Salesforce StackExcahnge https://salesforce.stackexchange.com/
I've been asked to help do some much needed updates to Microsoft Dynamics NAV 5.0 (yes its old) and they want me to update some of their email templates for sales orders, etc. One of the things they want me to do is update the 'From' field to be a group email box instead of the current user, which I didn't think about be too difficult, but figuring out how NAV creates emails has been less than simple.
This article had some information, but didn't get me all the way there:
http://www.dynamics101.com/2014/02/sending-customized-emails-dynamics-nav/
I've found the Sales Header table which has lots of fields...none of which include "From". I found one field called "Assigned User" which points to the User Setup.
Do you mean the mails that are sent on the event of sales order approval / rejection or that small 'New Mail Message' button in the Customer card? Libraries that are used in these cases are different, and they rely on different automation objects to create e-mail messages.
Anyway, in both cases there is no setup to change the 'From' field - you'll have to customize it a bit.
First of all, you'll need a new field in a setup table to store the e-mail address. Table 'User Setup' is probably the best place, but it depends on the task, of course. Suppose, it is Uset Setup, and you call the new field 'FromAddress'
When you click on the e-mail button in the Customer card, 'Create Mail' wizard is run (Form 5148 'Create Mail'). It calls the function 'NewMessage' in codeunit 397. So, codeunit 397 'Mail', is what you are looking for. To change the 'From' address you need to set the property 'SentOnBehalfOfName' in the OSendMail object.
UserSetup.GET(USERID);
OSendMail.SentOnBehalfOfName(UserSetup.FromAddress);
If the message you want to change is the document approval notification, e-mail message is created in the codeunit 400 'SMTP Mail', but all fields are set up in the codeunit 440 'Approvals Mgt Notification', functions SetTemplate and GetEmailAddress. It is GetEmailAddress that sets the sender address. You need to replace this line of code:
SenderAddress := UserSetup."E-Mail";
with the new one
SenderAddress := UserSetup.FromAddress;
But be careful - this change will affect all templates and all users. If you need to change some templates while leaving other untouched, it is safer to redefine the value of this variable in a function responsible for the particular template. But again, it's all in codeunit 440.
I have a form sent by email that travels through different persons like this.
Person A --> Person B --> Person C
I want the person A to be informed when the form is treated by person C. So Person A needs to be in copy of the email sent by person B.
Because person A isn't always the same one, I think the best way to put him/her in copy is to use the "from" field of the email received by person B and to put it in copy.
But how can I find this address with infopath and how can I place it into my email data connection ?
I had this same question today myself and could not find much in the way of answers.
So... I did some work myself and came up with a few solutions.
First I don't believe there is any way to get/set the "From" address using the InfoPath OM. This means you will have to use one of the following options:
No Code:
You will be limited to providing a field on the form where "Person A" can put their email address and use this in the CC. for subsequent stages. That's kind of the only way and while it an extra burden to the user it does have the benefit of providing flexibility.
Code:
Write your own code to send the mail using Outlook Interop or System.Net.Mail and then you will be setting all of the addresses manually anyway.
If you are using AD or something else then you could always get the email address of the current use using System.DirectoryServices.AccountManagement.
Based on an assumption which I cannot find any documentation to back up. That InfoPath uses the account associated with the default store to send email using EmailSubmitConnection. You should be able to use Outlook Interop to find the address that InfoPath will use.
Here is a code sample:
using Outlook = Microsoft.Office.Interop.Outlook;
public string GetDefaultSenderAddress()
{
// This actually opens outlook in the same way as InfoPath does to send the message.
// which can be slow.
string DefaultAddress = string.Empty;
Outlook.Application OutlookApplication = new Outlook.Application();
string DefaultStoreId = OutlookApplication.Session.DefaultStore.StoreID;
foreach (Outlook.Account Account in OutlookApplication.Session.Accounts)
{
if (Account.DeliveryStore.StoreID == DefaultStoreId)
{
DefaultAddress = Account.SmtpAddress;
}
}
// Note you probably won't want to quit if you are about to send the email.
// However I have noticed that this doesn't seem to close Outlook anyway.
OutlookApplication.Quit();
return DefaultAddress;
}
You may have to provide a few more checks in case of different account types etc. But I believe it will work. (I tested it for my scenario and it does).
Note: Of course this opens an outlook instance which you will have to close as well. And it can be slow. Unless outlook is already open in which case it will be very quick. Anyhow when sending from InfoPath Outlook will have to be opened so if you do this just before sending then there should be no noticeable difference.
I would advise using a combination of the no code/with code options so provide a return address which is automatically complete to save the user time. But can be corrected if the user wishes to have the email returned to a different address of if there is a mistake.
Hope that you find that useful.
We built an app in Zend Framework (v1) and have not worked a lot in setting up error reporting and logging. Is there any way we could get some level or error reporting without too much change in the code? Is there a ErrorHandler plugin available?
The basic requirement is to log errors that happens within the controller, missing controllers, malformed URLs, etc.
I also want to be able to log errors within my controllers. Will using error controller here, help me identify and log errors within my controllers? How best to do this with minimal changes?
I would use Zend_Log and use the following strategy.
If you are using Zend_Application in your app, there is a resource for logging. You can read more about the resource here
My advice would be to choose between writing to a db or log file stream. Write your log to a db if you plan on having some sort of web interface to it, if not a flat file will do just fine.
You can setup the logging to a file with this simple example
resources.log.stream.writerName = "Stream"
resources.log.stream.writerParams.stream = APPLICATION_PATH "/../data/logs/application.log"
resources.log.stream.writerParams.mode = "a"
resources.log.stream.filterName = "Priority"
resources.log.stream.filterParams.priority = 4
Also, I would suggest sending Critical errors to an email account that is checked regularly by your development team. The company I work for sends them to errors#companyname.com and that forwards to all of the developers from production sites.
From what I understand, you can't setup a Mail writer via a factory, so the resource won't do you any good, but you can probably set it up in your ErrorController or Bootstrap.
$mail = new Zend_Mail();
$mail->setFrom('errors#example.org')
->addTo('project_developers#example.org');
$writer = new Zend_Log_Writer_Mail($mail);
// Set subject text for use; summary of number of errors is appended to the
// subject line before sending the message.
$writer->setSubjectPrependText('Errors with script foo.php');
// Only email warning level entries and higher.
$writer->addFilter(Zend_Log::WARN);
$log = new Zend_Log();
$log->addWriter($writer);
// Something bad happened!
$log->error('unable to connect to database');
// On writer shutdown, Zend_Mail::send() is triggered to send an email with
// all log entries at or above the Zend_Log filter level.
You will need to do a little work to the above example but the optimal solution would be to grab the log resource in your bootstrap file, and add the email writer to it, instead of creating a second log instance.
You can use Zend_Controller_Plugin_ErrorHandler . As you can see on the documentation page there is an example that checks for missing controller/action and shows you how to set the appropriate headers.
You can then use Zend_Log to log your error messages to disk/db/mail.