I want to implement some complex formatting using Word interop. It would be easy if I could copy the formatting from one range and then use the format painter to apply it to another range.
Is such a thing possible through the Word interop libraries?
Visual Studio 2008/Word 2007
From http://social.msdn.microsoft.com/Forums/en-US/vsto/thread/3f905707-b6d8-453d-9807-c7a9f8e9edae/
The best you can do for "quick and dirty" (as opposed to working through the attributes, one-by-one) is to use the Selection.CopyFormat / Selection.PasteFormat methods of the Word object model. These emulate the Format Painter (paint brush) tool in the Word UI; for details look them up in the Help. Play around with that a bit and see if it gives you what you're after. If you need both paragraph and character-level attributes, copy the paragraph formatting first, then the character formatting.
Related
I'm building an extension for VS Code and I'm wondering how to format text that I provide through SignatureHelp for a signature suggestion. In other extensions I see that you can at least make the text italic or bold and I haven't had any luck looking in repos to figure out how they do it.
I got it working by putting the parameters inside the SignatureInformation label (yes, it's a string and I just appended the human readable parameters at the end of my label).
I needed to provide an array of ParameterInformation containing the parameters I put in the label.
It magically worked after I provided the right activeParameter and activeSignature to the SignatureHelp.
VS code supports Markdown formatting in various places, e.g. hovers (very similar what you can use here or on Github, e.g. ** for bold _ for italic etc.).
I am having an issue using Adobe LiveCycle Designer in conjunction with iTextSharp. I have a multi-line text field that I'm stamping That looks like...
Blah blah text here: _________________
______________________________________
______________________________________
In LiveCycleDesigner, I have a single field that encapsulated all 3 lines (including the static text). I've set the font/paragraph settings so that the first line indents over to where the field starts, the field aligns vertically, and the lines are spaced properly.
When I use PdfStamper to set the fields (without flattening the form), it looks fine in Adobe (though Chrome and Firefox default plugins don't seem to support AcroForms very well). When I flatten the form, though, I lose everything but the font.
Does iTextSharp just not support the ability to do this? Is there some better way I should be doing this? I'm trying to build a generic form builder for my application, so a one-off fix won't really be useful for me.
The only alternative I've thought of is to break it into 3 fields on the PDF and use some clever grouping and MeasureString() (UGH) to determine how much of my string can fit in each field. Can anyone think of anything better?
I want to, using the DocX library [https://docx.codeplex.com/], convert a .docx document to use a different font. Does anybody know how to do that? The samples projects are very spare, and the documentation is nonexistent.
I find, too, that often there are extraneous spaces in documents, and I want to iterate over all these until there are never two contiguous spaces. I can do this in a loop, I guess, replacing " " (2 spaces) with " " (1 space) until " " (2 spaces) is no longer found.
However, I also want to remove superfluous line breaks that sometimes occur when copying-and-pasting text into a document. I can do it "manually" (in Libre Office, not sure how it's done in MS Word), as I got an answer to this question:
(select "Regular Expressions" and then replace "$" (without the quotes) with a space)
...but how programmatically, with DocX?
Additionally, in some cases I want to ADD line breaks/"paragraph returns" where there are legitimate line breaks between the end of one paragraph and the start of another, but no extra line to separate them visually. According to this:
...I can add a paragraph/line break to a legitimate line break by searching for "$" and replacing that with "\n\n"
This does work, too (manually, in Libre Office); but again...how to do this with the DocX library?
It appears that not all of this is possible with the current version of the DocX library you are using. If it is not exposed in documentation, the functions might as well not exist, and you should not be using undocumented features.
There is a much more mature library available, however, called the "Open XML SDK", that can do everything you need.
The correct way to change a font, regardless of whether you are doing it with the document editor, or you are writing a program to manipulate these files, is to change the appropriate text's style attribute, or changing the definition of style in use.
You should never, ever, ever, ever directly change the font of any text. Personally, I think that the 'font type' and 'font size' menus should be removed entirely from word/libreoffice/etc, and only be accessible inside a 'change style properties' dialog; the only reason to directly apply a font is if you are actually providing an example of particular typeface under discussion!
See How to: Replace the styles parts in a word processing document (Open XML SDK) from the MSDN documentation for a description of the way that works.
To search and replace text, the applicable MSDN page is How to: Search and replace text in a document part (Open XML SDK). For specifically replacing multiple spaces with a single space, there are numerous results on Google that should all work to at least some degree.
Following this lead, I tried this in a Github README.md:
<span style="vertical-align: baseline; position: relative;top: -0.5em;>text in superscript</span>
Does not work, the text appears as normal. Help?
Use the <sup></sup>tag (<sub></sub> is the equivalent for subscripts). See this gist for an example.
You have a few options for this. The answer depends on exactly what you're trying to do, how readable you want the content to be when viewed as Markdown and where your content will be rendered:
HTML Tags
As others have said, <sup> and <sub> tags work well for arbitrary text. Embedding HTML in a Markdown document like this is well supported so this approach should work with most tools that render Markdown.
Personally, I find HTML impairs the readable of Markdown somewhat, when working with it "bare" (eg. in a text editor) but small tags like this aren't too bad.
LaTeX (New!)
As of May 2022, GitHub supports embedding LaTeX expressions in Markdown docs directly. This gives us new way to render arbitrary text as superscript or subscript in GitHub flavoured Markdown, and it works quite well.
LaTeX expressions are delineated by $$ for blocks or $ for inline expressions. In LaTeX you indicate superscript with the ^ and subscript with _. Curly braces ({ and }) can be used to group characters. You also need to escape spaces with a backslash. The GitHub implementation uses MathJax so see their docs for what else is possible.
You can use super or subscript for mathematical expressions that require it, eg:
$$e^{-\frac{t}{RC}}$$
Which renders as..
Or render arbitrary text as super or subscript inline, eg:
And so it was indeed: she was now only $_{ten\ inches\ high}$, and her face brightened up at the thought that she was now the right size for going through the little door into that lovely garden.
Which renders as..
I've put a few other examples here in a Gist.
Unicode
If the superscript (or subscript) you need is of a mathematical nature, Unicode may well have you covered.
I've compiled a list of all the Unicode super and subscript characters I could identify in this gist. Some of the more common/useful ones are:
⁰ SUPERSCRIPT ZERO (U+2070)
¹ SUPERSCRIPT ONE (U+00B9)
² SUPERSCRIPT TWO (U+00B2)
³ SUPERSCRIPT THREE (U+00B3)
ⁿ SUPERSCRIPT LATIN SMALL LETTER N (U+207F)
People also often reach for <sup> and <sub> tags in an attempt to render specific symbols like these:
™ TRADE MARK SIGN (U+2122)
® REGISTERED SIGN (U+00AE)
℠ SERVICE MARK (U+2120)
Assuming your editor supports Unicode, you can copy and paste the characters above directly into your document or find them in your systems emoji and symbols picker.
On MacOS, simultaneously press the Command ⌘ + Control + Space keys to open the emoji picker. You can browse or search, or click the small icon in the top right to open the more advanced Character Viewer.
On Windows, you can a emoji and symbol picker by pressing ⊞ Windows + ..
Alternatively, if you're putting these characters in an HTML document, you could use the hex values above in an HTML character escape. Eg, ² instead of ². This works with GitHub (and should work anywhere else your Markdown is rendered to HTML) but is less readable when presented as raw text.
Images
If your requirements are especially unusual, you can always just inline an image. The GitHub supported syntax is:
You can use a full path (eg. starting with https:// or http://) but it's often easier to use a relative path, which will load the image from the repo, relative to the Markdown document.
If you happen to know LaTeX (or want to learn it) you could do just about any text manipulation imaginable and render it to an image. Sites like Quicklatex make this quite easy. Of course, if you know your document will be rendered on GitHub, you can use the new (2022) embedded LaTeX syntax discussed earlier)
Comments about previous answers
The universal solution is using the HTML tag <sup>, as suggested in the main answer.
However, the idea behind Markdown is precisely to avoid the use of such tags:
The document should look nice as plain text, not only when rendered.
Another answer proposes using Unicode characters, which makes the document look nice as a plain text document but could reduce compatibility.
Finally, I would like to remember the simplest solution for some documents: the character ^.
Some Markdown implementation (e.g. MacDown in macOS) interprets the caret as an instruction for superscript.
Ex.
Sin^2 + Cos^2 = 1
Clearly, Stack Overflow does not interpret the caret as a superscript instruction. However, the text is comprehensible, and this is what really matters when using Markdown.
If you only need superscript numbers, you can use pure Unicode. It provides all numbers plus several additional characters as superscripts:
x⁰¹²³⁴⁵⁶⁷⁸⁹⁺⁻⁼⁽⁾ⁿⁱ
However, it might be that the chosen font does not support them, so be sure to check the rendered output.
In fact, there are even quite a few superscript letters, however, their intended use might not be for superscript, and font support might be even worse. Use your own judgement.
I have a function within a custom CRM web application (old VB.Net circa 2003) that takes a set of fields from a database and merges them with palceholders in a set of RTF based template documents. These generate merged letters and documentation. The code essentially loops through each line of the RTF template file and replaces any instances of the placeholder values with text from a database record. The issue I'm having is that users have pasted a certain type of apostrophe into the web app (and therefore into the database) that is not rendering correctly in the resulting RTF file. It is rendering like this - ’.
I need a way to spot this invalid apostrophe in the code and replace it with a valid one. Unfortunately when I paste the invalid apostrophe into the Visual Studio editor it gets converted into the correct one. So I need another way to express this invalid apostrophe's value. Unfortunately I do not know a great deal about unicode and other encodings so I'm calling out for help with this.
Any ideas?
If you really just want to figure out what the character is you might want to try and paste it into a text editor like ultraedit. It has a hex mode that you can flip to to see the actual underlying bytes.
In order to do the replace once you've figured out the character you'd do something like this in Vb,
text.Replace(ChrW(2001), "'")
Note that you might not be able to figure it out easily using the text editor because it might also get mangled by paste from the clipboard. You might want to either print some debug of the ascii values from code. You can use the AscW function to do that.
I can't help but think that it may actually simply be a case of specifying the correct encoding to use when you write out the stream though. Assuming you're using a StreamWriter you can specify it on the constructor. I'm guessing you actually want ASCII given your requirement.
oWriter = New System.IO.StreamWriter(path, False, System.Text.Encoding.ASCII)
It looks like you probably want to encode characters out of the 8 bit range (>255).
You can do that using \uNNNN according to the wikipedia article.