I wanna use jboss 6 and jboss 5 on the same machine (of course, neither is online at same time ). Why? Because, I don't know jee5 apps can be run on jboss 6. Now, I use jee5 and jboss 5. And I want to migrate jee6 fully. Because of reason of compatibility, I have to use and run jee5 at the same time.
I have been located jboss6 and jboss5 on C: and set JBOSS_HOME environment variable for c:\jboss5. When I want to run jboss 6 with command c:\jboss6\bin\run -c all , jboss5 is run. Because of environment variable?
How can I run either? And what about environment variable?
Thanks.
jboss5 is run because of the environment variable as you guessed.
Just reset the environment variable to c:\jboss6 and you should be able to run jboss6.
If you want to run them both at the same time on the same machine, the easiest way to accomplish this is to make your host multi-homed (multiple ip addresses on the same machine) and have a hostname resolve to each address. You need to do something like this to prevent port conflicts (each jboss will use similar ports on the same ip address, which will cause the 2nd server to not startup).
So if this was on a home network, you could have an ip address of 192.168.1.100 for jboss5 and 192.168.1.101 for jboss6.
Now to start jboss5, set the environment variable and:
c:\jboss5\bin\run -c all -b jboss5
and to start jboss6, set the environment variable and:
c:\jboss6\bin\run -c all -b jboss6
Related
I'm trying to run a distribution test for learning purpose and i'm using a Virtual machine Centos 7 as a slave in my Windows 7 ( master running in window 7) but even if i configure the master with the IP of the slave ( VM ), modifying the file jmeter.properties, doesn't work, i try run Jmeter-server in the Centos machine but this problem appears.
Created remote object: UnicastServerRef [liveRef: [endpoint:[127.0.0.1:44341](lo
cal),objID:[4e68a212:14a8564a618:-7fff, 5760053273490727502]]]
Server failed to start: java.rmi.RemoteException: Cannot start. localhost.locald
omain is a loopback address.
An error occurred: Cannot start. localhost.localdomain is a loopback address.
Can somebody give me a direction where look or a explanation how can i do it?
Thanks!
Put the following line in system.properties file: java.rmi.server.hostname=xxx.xxx.xxx.xxx
Alternatively start JMeter providing above property as a command-line argument as:
jmeter (or jmeter-server) -Djava.rmi.server.hostname=xxx.xxx.xxx.xxx
Double check your network configuration, i.e. make sure that your /etc/hosts file contains the following lines:
127.0.0.1 localhost localhost.localdomain
xxx.xxx.xxx.xxx your CentOS machine hostname
In all above cases xxx.xxx.xxx.xxx should be IP address of your CentOS machine and this IP address must be different from 127.0.0.1.
Also make sure that you select "Bridged" networking in your Virtual Machine, machines should be able to reach each other over the network, firewalls should be properly configured to allow communication, etc.
For more information on different JMeter Properties and ways of setting/overriding them see Apache JMeter Properties Customization Guide
I am attempting to deploy a war file (Oracle's APEX Listener) to a GlassFish 3.1.2.2 server deployed on an RHEL server (I am also seeing the same issues on an Ubuntu server at home).
I used the following command to create the domain:
$GLASSFISH_HOME/bin/asadmin create-domain --portbase 8100 myDomain
[I am also creating multiple domains on the same GlassFish server (one GF instance with multiple domains) using values of 8200, 8300, and 8400 for the portbase value and using different domain names.]
I then start the domain using:
$GLASSFISH_HOME/bin/asadmin start-domain myDomain
Next, I attempt to deploy the APEX.WAR file using:
$GLASSFISH_HOME/bin/asadmin deploy --contextroot apex apex.war
But, I get the following error:
Remote server does not listen for requests on [localhost:4848]. Is the server up? Unable to get remote commands. Closest matching local
command(s):
help Command deploy failed.
I have also used the following commands with the same result:
$GLASSFISH_HOME/bin/asadmin deploy apex.war
$GLASSFISH_HOME/bin/asadmin deploy --target myDomain apex.war
$GLASSFISH_HOME/bin/asadmin deploy --target domain apex.war
And I get the same error each time.
I can deploy the file using the admin gui, but this is for a customer installation and I would really like to do as much as possible from the bash shell script I have created.
I am also installing the Java 1.7.0_45 JDK and modifying the $GLASSFISH_HOME/config/asenv.conf file to include AS_JAVA=
The error is actually correct because the admin port is 8148. But, how do I get GlassFish to "know" to use 8148 instead of 4848.
I have also tried this by:
$GLASSFISH_HOME/bin/asadmin create-domain --adminport 8148
--domainproperties http.ssl.port=8152
but this gets the same results as above.
Thanks for reading this tome of a post and any info on how to fix this would be greatly appreciated!
/dave
You can specify the port to which asadmin should connect as a parameter like this:
asadmin --port 4949 start-domain
If this isn't enough you can even specify the hostname with --host.
Have a look at the official documentation to see all possible parameters.
i get the same error ,you should do like this:
$GLASSFISH_HOME/bin/asadmin --port 8148 deploy apex.war
and input username and password the default user is admin and password is adminadmin
good luck for you!
In Windows Server 2008 R2, I can run JBoss successfully from the command line specifying options suchs as "-b 0.0.0.0". However, I want to run JBoss as a Windows service. I understand that I run /Path/To/JBoss/bin/service.bat install from the command line and this basically runs the start.bat whenever the computer starts. How do I configure the service to start with the command line arguments of -b 0.0.0.0?
Possible duplicate of How can I bind a JBoss AS 6 running as service to 0.0.0.0?
You could just hardcode -b 0.0.0.0 inside run.bat.
BTW, consider using Java Service Wrapper or YAJSW as RunJBossAsAServiceOnWindows wiki suggests. It allows to specify various service params in config.
i have a little issue with a Jboss AS 4.2.3 . I'm developing an application in Seam so i'm using Jboss as server. In the client company they have a Jboss AS 4.2.3 installed on Fedora and configured as a service, so it starts automatically on boot machine with PostgreSQL. So, if i run chkconfig --list i can see Jboss here as a service.
But the problem is when i try to restart, stop or start this service (i have root permissions) using this command:
service jboss stop/restart
But i don't know what happens that looks like it doesn't find the Jboss AS instance that's running because i get this message:
JOBSS_CMD_START = cd /opt/java/jboss/bin; /opt/java/jboss/bin/run.sh -c default
No JBossas is currently running
But it's running because if i enter localhost:8080 on a browser it loads the Jboss page. The server admin of the company doesn't know also why the service can't restart or stop or start and only i know that he followed this tutorial to install and configure JBoss AS:
thewiki4opentech.org/index.php/How_to_install_JBoss_AS_in_CentOS_/RedHat/_Fedora
Also, i tried with
/etc/init.d/jboss stop
And i get the same output. If i use
/opt/java/jboss/bin/start.sh -c default
It tries to start a second instance of Jboss AS but it gives me errors because is trying to use the same ports as already started Jboss instance.
And it's difficult to me because i'm connecting remotely using Teamviewer and i want to deploy an EAR but i can't because i can't restart the service to extract the ear. So i wanna ask you for help if you know why the Jboss AS that's running can't be stopped or started using service jboss stop.
As aditional info, i'm using the config to access Jboss apps from other machines (using 0.0.0.0) and the server has a static IP. The config of my hosts file is this:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
192.168.1.106 entertechserver.localdomain entertechserver
#::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Regards.
Well, i think that i found the answer. The server admin copy the script run.sh to /etc/init.d/ but we saw that there's another script named jboss_init_redhat.sh that i think is optimized for redhat/fedora systems, so we used this script to copy to /etc/init.d/ and it works!! Now when i stop it gives me the next output:
JBOSS_CMD_START = cd /opt/java/jboss/bin; /opt/java/jboss/bin/run.sh -c default -b 0.0.0.0
waiting for processes to stop
Really i haven't seen the difference between both scripts yet but it will be intersting to take a look.
Regards.
I was given the task of installing jboss-5.1.0.GA on a remote ubuntu 10.4 Lts server. With all those resources out there I was able to run jboss successfully but my problem was that I wasn't able to get auto start on boot work so that jboss would be running on the server.
I followed a couple of tutorials that said me create a separate user called jboss and to copy the jboss_init_Redhat.sh to the /etc/init.d/jboss (jboss home, java path ,jboss user and the binding to 0.0.0.0 is all set) and used /etc/init.d/jboss start
but I can't get to see the Jboss page at the Ip on a browser.,
If i do a ./run.sh -b 0.0.0.0 ==> the server is up ...
Can some body shed some light on this issue????
If you want to run JBoss AS on given interface using jboss_init_redhat.sh script look at these line:
#if JBOSS_HOST specified, use -b to bind jboss services to that address
JBOSS_BIND_ADDR=${JBOSS_HOST:+"-b $JBOSS_HOST"}
You should just define new variable before these line:
JBOSS_HOST="0.0.0.0"
You should also check shutdown command (especially when you run your server on some other address then 127.0.0.1 or 0.0.0.0), it should know how to find your server:
JBOSS_CMD_STOP=${JBOSS_CMD_STOP:-"java -classpath $JBOSSCP org.jboss.Shutdown --shutdown -s jnp://${JBOSS_HOST}:1099"}