I am doing zen frame work installation by http://framework.zend.com/manual/en/learning.quickstart.intro.html in this i am following the comments of Posted by: alstanto on: 2010-04-07 22:04:18
I had done all the things added to the path variable c:\zend\library;and php path also and restart the system.this thing work on xp but not working on vista.
but while running zf show version it is saying me that zf is unrecognized command .
please suggest how i can do ?
Thanks
Same Way Problem was in setting path variable i had given the space before ; :-)
Related
I am working on some stuff for mongodb and when I try to launch Apache using XAMPP an error occurs: "The procedure entry point compiler_globals_offset could not be located in the dynamic link library D:\XAMPP\php\ext\php_mongodb.dll" I do have a comment in php.ini (D:\XAMPP\PHP) that targets it: extension=php_mongodb.dll. The launch does work if I comment the extension=php_mongodb.dll
Thanks for your help.
I run into the same issue. But than I saw, that I had chosen the DLL for a wrong php version.
Just check for your self if you download the dll for the right php version
I have a small issue here. I installed Jboss-6.1.0 and when I run the 'run' bat file, JBoss does not get started and I get this error. (Please refer the attached)
My OS is Windows 8.1.I have set my Path and Java_Home variables correctly.Is there any more configuration to do?
A help is much appreciated.Thanks in advance.
I also had the same problem although with java 1.8. These are the steps I followed.
1.Go to the “bin” directory where you’ve installed JBoss
2.Edit the “run.bat” file
3.Search for the line “
set JAVA_OPTS=-Dprogram.name=%PROGNAME% -Dlogging.configuration=file:%DIRNAME%logging.properties %JAVA_OPTS%“
Change the %DIRNAME%
to your absolute path to the “bin” directory of your installed JBoss.e.g.
set JAVA_OPTS=-Dprogram.name=%PROGNAME% -Dlogging.configuration=file:”C:\Java\jboss-6.1.0-final\bin\logging.properties” %JAVA_OPTS%
I do not think the java version difference would affect the solution. It should work.
I have downloaded and installed Zend Server community edition. I am on a mac.
I have tried to changed the path in
/usr/local/zend/apache2/conf/httpd.conf
so that it pointed at a test file in my documents folder. However, when I type
http://localhost:10081/test.php
into my browser, I just get 404- page not found.
Any suggestions? I am new to web stuff and don't really know what I'm doing wrong.
You can find step by step directions for setting up your local environment on a mac:
http://www.cmiwebstudio.com/blog/zend-server-ce-for-mac-osx-10-lion/
and some other posts that may also help here:
http://www.cmiwebstudio.com/blog/tag/zend-server-ce/
I am trying to install ZEND FRAMEWORK on my localhost but failing miserable. I am following the below mentioned steps but don't know where am I going wrong. Please help me with the same.
Steps are as follows that I followed:
Downloaded the ZEND Framework full package version 1.11.7 which is about 25 Mb in a zipped version and then unzipped it to a folder called ZendFrameWork.
Copied the ZendFramework folder inside my c:\xampp\php\
changed the "include_path = '.;\xampp\php\PEAR;\.;C:\xampp\php\ZendFramework\library' " in the php.ini file.
Then restarted the apache server.
EDIT :: I have successfully managed to get the zf command to run without any errors. but now, all it does is, after i enter "zf create myproject" it just gets stuck with the cursor blinking on the next line. And if i press CTRL+C, i get the message : Terminate batch job ? (Y/N)
Then set the environment variable for zf.bat file as " C:\xampp\php\ZendFramework\bin "
But when I try to execute the " zf create sampleProjName " from command line it does nothing, so then I used Windows Powershell and it gives the error which I have attached below.
Waiting for your response.
Thanks in advance.
Try using normal cmd - not powershell. Works fine for me.
Thanks for all your response.
I successfully installed Zend Framework.
I removed the full installation and replaced it with minimal installation and also I did not have php.exe set as an environment variable, so i did that too and also in the php.ini file i needed to write the zend library first before the pear one.
And this was it, TA-DA, it worked.
:)
I have recently setup XAMPP 1.7.3 and ZendFramework 1.10.4 on a new computer and many of the commands that I normally use now fail.
Here are the steps I used to setup and test ZF.
First I added the ZF library folder (C:\xampp\php\ZendFramework-1.10.4\library) to the include path in php.ini.
Then I added the ZF bin folder (C:\xampp\php\ZendFramework-1.10.4\bin) to my Path system variable.
To test that everything is configured correctly I ran the command "zf show version" from the command line. The result is "Zend Framework Version: 1.9.6".
Immediately something appears to be wrong. The file that is downloaded is "ZendFramework-1.10.4.zip" and the reported version is 1.9.6. I have re-downloaded the latest version (1.10.4) and removed old copy. Still the incorrect version number problem persisted.
Having done some research there is a bug in the ZF knowledgebase that version 1.10.3 reports a wrong version number. So that may explain the version number problem.
Moving forward I tried to run some zf-tool commands and certain commands reports that the action or provider is not valid.
Example:
C:\xampp\htdocs>zf create project test
Creating project at C:/xampp/htdocs/test
C:\xampp\htdocs>cd test
C:\xampp\htdocs\test>zf create controller Test
Creating a controller at C:\xampp\htdocs\test/application/controllers/TestController.php
...
Updating project profile 'C:\xampp\htdocs\test/.zfproject.xml'
C:\xampp\htdocs\test>zf create action test Test
Creating an action named test inside controller at C:\xampp\htdocs\test/application/controllers/TestController.php
...
Updating project profile 'C:\xampp\htdocs\test/.zfproject.xml'
C:\xampp\htdocs\test>zf enable layout
An Error Has Occurred
Action 'enable' is not a valid action.
...
C:\xampp\htdocs\test>zf create form Test
An Error Has Occurred
Provider 'form' is not a valid provider.
...
Can any one provide insight into these errors and how to correct them?
I had a similar issue, it turned out that I needed to manually update the zf.bat and zf.php files that came included with xampp after updating to the latest zend framework.
I got them from the zend svn here: http://framework.zend.com/svn/framework/standard/trunk/bin/
the simple way if you are using xampp, just go to the path "xampp\php\PEAR" an replace the older Zend directory with all included files by a new one zend 1.10... dir and your porblems are lost :)
i think your problem is, that Zend Tool is shipped with xampp since some versions.
Try to find zf.bat in your Xampp directory and remove it ;)
ZF friends have written the worst kind of docs. For XAMPP user, it is more difficult. I have learning ZF and posting error getting on the path. I am also using XAMPP.
Your error list is very big. I hope I can help you.
Solution for error "An Error Has Occurred
Action 'enable' is not a valid action." is XAMPP's Zend Tool installation. Delete that.
Check here for more details about the solution and other possible errors: http://www.satya-weblog.com/2010/11/zend-framework-creating-layout.html.